Do-it-yourself meter toys for the new year. DIY Christmas decorations from improvised materials - step by step instructions. Let's start making New Year's paper toys with our own hands: options for holiday decorations

Do you love needlework? Then you will love making DIY Christmas decorations! This is a pleasant and exciting activity for the whole family that will not leave anyone indifferent - you will spend several evenings with pleasure making toys for the Christmas tree with your own hands.

What do we use for the material

What do you need to make DIY Christmas decorations? You can use almost anything that comes your way. If you want, you can buy special expendable materials(sold in stores for creativity), or you can use what is in any home. So what to prepare:

plain paper (suitable for making patterns);
pencils and markers;
ordinary, white and colored cardboard (velvet can be used);
sharp scissors and a dummy knife;
glue (PVA or glue gun with rods);
threads and needles;
yarn of different shades;
various decorative materials - it can be sparkles, sequins, confetti, multi-colored foil, stickers and much more.

This is a basic set, but in order to make a specific Christmas tree toy, something else may be required.

Simple crafts from improvised materials

Of course, you have probably seen how Christmas balls are made from threads and glue with your own hands, but why not expand the range? We make different Christmas decorations with your own hands.

From yarn

This is a simple and at the same time spectacular Christmas decoration that can decorate any Christmas tree.

For manufacturing you will need:

yarn;
tailor's pins;
plate or bowl;
porous material (for example, a disposable tray);
cutting paper;
marker.

The threads need to be soaked in glue - the glue should soak the yarn well, it is thanks to it that the decoration will keep its shape. While the threads absorb the glue, you need to make a template for your toy - draw on paper what you want. It can be DIY Christmas balls, outlandish birds or neat little houses. You can also try to make a snowman, a couple of small Christmas trees and a star.

The template needs to be attached with pins (or ordinary toothpicks) to the porous material, and lay out the pattern you need on top - first the outline is laid out, then the interior decor. Do not cross the threads too often, the toy should be fairly flat. After you are done, dry the product and remove it from the pins, and tie a loop in the eye. If desired, you can decorate with sparkles or rain.

From wire

How to do christmas toys with your own hands in just a couple of minutes? Use wire!

To make toys you will need:

two types of wire - thick and thin (thin can be replaced with bright threads, for example, floss. Pure white strong threads look very nice);
beads, beads;
colored tape;
pliers.

In order to make figurines or balls for the Christmas tree, cut a few pieces from thick wire and give them the shape that your Christmas decoration. In our case, this is a star, but you can use any geometric figures and simple silhouettes.

The ends of the thick wire must be twisted. You need to string beads and beads mixed on a thin wire, tie the end of a thin wire to a future Christmas tree decoration, and wrap it randomly.

When the toy is evenly wrapped, you need to wrap the free tail of the wire around the toy, and tie the ribbon in the shape of a bow - your toy is ready.

Another original idea:

Ribbon and beads

Who said that do-it-yourself New Year's toys must be done for a long time and painstakingly? Not at all. Literally in five minutes you can, which will decorate and Christmas tree, and the interior.

You will need:

beads;
narrow tape;
yellow, gold or silver cardboard;
glue "Second";
needle with thread.

We fold the ribbon with an accordion and string it on a thread, after each loop of the ribbon you need to string a bead. The more "tiers", the smaller they are - you see, the Christmas tree is already starting to turn out. When the ribbon ends, the thread must be tied in a knot, and a small star should be cut out of the cardboard. Next, you need to glue your Christmas tree to the asterisk, and make a loop on top so that the decoration can be easily hung.

The interior decor made in this way looks very attractive.

From cardboard - in a couple of minutes

Some Christmas toys made of paper or cardboard take a lot of time to make, but not in this case - here you really need a couple of minutes to make an elegant hand-made Christmas decoration.

So, you will need:

ordinary cardboard;
some twine or thick yarn;
glue;
paints and brushes;
napkin or cloth;
varied decor.

Make two figurines out of cardboard, glue them together, laying a thread with a loop between them - the blank for the toy is ready.

With a free tail of twine we wrap the Christmas tree in different directions. After some pattern of threads appears on the Christmas tree, you can start gluing it with a napkin. You can tear the napkin into pieces, coat the Christmas tree well with glue, and glue it tightly with a napkin. This will give a nice texture to the future toy.

After the toy has dried, you can start painting - paint the Christmas tree green.

After the paint layer dries, shade the texture of the toy with a dry hard brush and white paint, and then decorate as you like.

From bright patches

Here you will need sewing machine, but with a special desire, you can cope without it. This The best way make Christmas toys from cotton wool and fabric - just choose a fabric with a Christmas ornament, or use the one that is at hand.

Prepare a few paper patterns- for example, deer, stars, gingerbread men, bear cubs, letters and hearts. Cut the blanks out of the fabric with your own hands, sew them in pairs, leaving a small gap (for stuffing), and through this small hole, tightly stuff the toys with cotton wool or padding polyester. It is most convenient to fill with a pencil.

Patterns can be downloaded here:

By the way, do not forget - we sew on a typewriter from the inside, but if you decide to make toys made of dense fabric with the kids, then it is better to sew them with a decorative seam over the edge - a do-it-yourself toy will look simply charming and suitable even for a home Christmas tree, even for a kindergarten - usually for kindergarten trees, children make decorations themselves.

From twine and cardboard

New Year's toys made of paper and cardboard will be much more interesting if you add a couple more to them. simple materials. To make such a toy, you will need ordinary cardboard, simple paper or natural twine, a little felt or any other fabric, as well as plain paper, a pencil and a ruler, a drop of glue.

The star pattern can be downloaded here:

First, make a pattern on plain paper, and then transfer it to cardboard. Do not forget that the star must be double. Do not make the star too thin, it is better to make it from a centimeter or more. The tail of the twine is glued to the cardboard, then you need to gradually wrap the entire workpiece.

Lay the thread as tightly as possible so that there are no gaps. In order to decorate the star, make a couple of leaves and berries out of fabric and decorate one of the rays. Your decoration is ready.

From yarn and cardboard

Do you want to make original and at the same time charming Christmas decorations with your own hands? Then it's time to make small gift hats with your own hands from improvised materials. It's wonderful new year gift which looks cute and will keep you warm all winter!

To make Christmas tree decorations in the form of hats, you will need:

a couple of bushings from toilet paper(you can just glue cardboard rings);
remnants of colored yarn;
beads and sequins for decoration.

From cardboard, you need to glue rings about 1.5-2 cm wide. If you use a toilet paper sleeve as a base, cut it into several segments of approximately the same width.

The threads need to be cut into segments of approximately 20-22 centimeters. We fold each piece in half, draw the loop through the cardboard ring, and stretch the free edges of the threads through the loop. It is necessary that the thread is firmly fixed on the cardboard base. So you need to repeat until the cardboard base is hidden under the threads.

All thread tails need to be pulled through the ring so that our hat has a “lapel”.

And now we drag the free ponytails tightly with a thread and cut them in the shape of a pompom - the hat is ready! It remains only to make a loop and decorate your Christmas tree toy with sequins and sparkles.

From beads

Making a New Year's toy in the style of minimalism is easy and simple - you will need wire, beads and beads, a ribbon and a coin (you can replace it with a small candy, but it looks much more spectacular with a coin). Try to make this Christmas tree toy with your own hands, a very simple master class.

Make a loop on the wire and string green beads mixed with large beads on it - they will play the role of New Year's balls on our Christmas tree. After the wire is filled, give it the shape of a Christmas tree, folding in a spiral.

Once your tree is in shape, fold the loose end into a loop.

We cut off a piece of tape, form a loop for hanging from it and stretch it through the Christmas tree, and decorate the free tail with a coin (the easiest way is to stick it on double-sided tape). We tie a decorative bow on the loop for hanging - your decor is ready!

Christmas balls

How to do christmas ball from threads? As easy as shelling pears, watch our master class about spectacular lace balls on the Christmas tree.

Would need:

several balloons;
cotton threads;
PVA, water and sugar;
scissors;
polymer glue;
spray paint;
decor.

First you need to inflate the balloon - not completely, but according to the size of the future decoration. Mix two tablespoons of water, two teaspoons of sugar and PVA glue (50 ml), and soak the thread in this mixture so that the thread is saturated. Then you need to wrap the ball with a thread randomly. The balls need to be dried for several hours. After the glue is completely dry, you need to blow off the ball and remove it, and thread ball gently paint with spray paint and decorate with sequins and sparkles.

Do-it-yourself thread Christmas balls will turn out to be very, very spectacular if you make them in different tones - for example, red, silver and gold. Try to make your own Christmas balls in different technique- you can sew or knit balls, make them from cotton wool with your own hands or, for example, sew them from felt - there are never too many such toys.

From paper

New Year's decorations made of paper are very popular among both big and small admirers of the New Year's miracle - try to make paper Christmas balls with your own hands.

Do-it-yourself New Year's paper toy is done like this:

Decorating such a toy is not additionally required, it is already expressive.

Another version of the ball:

Or you can make such a ball according to the master class:

From felt

Do-it-yourself Christmas toys made of felt look very warm and cozy, and making them is very, very simple. To make your own charming Christmas toys made of felt, you will need:

red, white and green felt;
threads of red, white and green;
glue Crystal;
scissors and needles;
cardboard;
some satin ribbon;
soft filler (cotton wool, holofiber, synthetic winterizer).

First make sketches for your future toys. It can be anything. After the patterns are ready, transfer them to the felt and cut them out. What is good about this material is that it does not crumble, you will not need to additionally process the edge of each workpiece.

Make the same decorative elements - for example, holly branches (by the way, did you know that this is a symbol of joy and Christmas reconciliation?). Berries need to be glued to the leaf with glue, and then make a decorative knot - this will add volume to the berries.

We sew each blank in pairs. By the way, it is best to sew with contrasting threads, it will be fun and elegant. And how to make Christmas decorations voluminous? Stuff them with holofiber before sewing them up completely! Spread the product well, so the Christmas tree toy will be stuffed more evenly. For stuffing, you can use the back of the pencil.

Sew on decorative elements and your Christmas toy is ready!

Try sewing felt decorations not only for the Christmas tree, but also for your home - for example, a Christmas wreath decorated with felt toys, looks very stylish. Look at a selection of DIY Christmas decorations photo workshops - and you will understand how much interesting things can be done from ordinary felt of two or three colors.

Master class how to do Christmas garland do it yourself from felt:

Below you can download templates and patterns of different Christmas trees for crafts from felt.

Everyone can make original New Year's crafts. All you need is a little time, imagination and, of course, good mood. Do you make one toy or want to decorate the whole Christmas tree with handmade decorations, creative process will give you real pleasure. And if you involve children, the preparation for the New Year will become even more fun. Materials for unusual crafts are easy to find at home or buy in needlework stores.

In this article:

What will we make

You can literally create New Year's toys for the Christmas tree from improvised materials. For the jewelry that we propose to make, you will need:

scissors,
glue,
thread,
needle,
pins,
ribbons,
paint in cans,
foam blanks,
filler for soft toys,
cardboard.

The main materials will be:

buttons,
beads, beads,
wire,
wool balls,
pompoms,
fleece or plush,
cones, nuts, acorns, seeds,
pasta,
paper,
felt,
newspapers.

Christmas decorations from buttons

Crafts from simple buttons look unusual.

For a multi-colored ball you will need:

foam blank,
buttons of different colors and sizes,
pins with beaded caps,
ribbon.

Pin the buttons to the workpiece with pins, tie a loop of tape. Even a street Christmas tree can be decorated with such balls - they are durable, not afraid of low temperatures, snow and dampness.

The basis for the second decoration is the same foam base, painted in golden color. If you glue matching buttons to it and pick up a ribbon with a golden thread, you get a retro-style decoration.

Even easier to make a Christmas tree. Materials:

10 - 12 green buttons of different diameters, 4 identical brown buttons for the trunk, a star button.
a thread,
needle.

Using a needle, string the buttons onto a thick green thread: first a star, then buttons from a smaller diameter to a larger one, and finally the trunk. Return the thread through the second holes in reverse order. Fasten the thread.

The basis of the star in pastel colors is a foam star. In addition, light buttons are needed. different sizes and styles, glue gun. To make the surface voluminous, you need to glue the buttons with an overlap, without trying to observe symmetry.

Crafts from beads

It is one of the most interesting materials to create due to the variety of shapes, colors and sizes.

For a multi-colored ball you will need:

foam base,
beads of different colors,
strong thread,
needle,
universal glue,
trailer for beads with a loop,
ribbon.

String beads on a thread, grease the base with glue, glue low in a spiral. At the end, attach a trailer for beads, thread through a loop and tie a ribbon.

Snowflake stars, bells and other decorations are made from beads, glass beads and beads of different sizes.

For a star you need:

wire star,
thin wire,
beads, beads of different colors and sizes.

String beads and beads on a thin wire. Wrap the asterisk with wire in any order.

Made from small pasta fine decoration resembling lace.

Will need:

small round balloon
PVA glue,
small pasta,
ribbon,
decorative rope,
tweezers.

Inflate the balloon to right size, grease with glue, roll over the pasta poured onto the table so that they stick evenly. Leave a hole about 1 cm in size. If necessary, trim the parts with tweezers. When the glue is completely dry, pierce the base, pull it out, and seal the hole. Color the product, attach a loop, tie a bow.

For a photo frame on a Christmas tree, cut out a cardboard star, stick pasta, leaving a place for a photo in the center. Paint the craft, stick a photo, sew on a loop.

If you have the skill of working in the quilling technique, make graceful gentle figures and. Wind paper motifs, glue them to the base. Decorate with small beads.

This technique can also be used for other Christmas tree decorations:

Christmas decorations from threads

From simple threads, which can be found in every home, you can make some wonderful light Christmas toys for the Christmas tree. You will need:

thread,
PVA glue,
small round balloons
beads,
paint in cans,
scissors,
cardboard,
wire star,
disposable food tray,
pins,
decorative elements (cones, ribbons).

Soak the thread with glue, wrap it inflated to the desired size balloon. Let the glue dry, blow off the base and get it out. Decorate the craft with ribbons and cones.

Cut out a Christmas tree from cardboard, wrap it tightly with a thread with strung beads, paint it.

It's even easier to make an asterisk. Give the wire a star shape or take a blank, wrap it with thread.

It is not difficult to give threads almost any form. To get a star or an angel, pin the outline of the future figure with pins, wind the threads in random order, grease with glue for strength. When the glue dries, all that remains is to remove the pins and, if necessary, decorate the figure.

How to make a Christmas tree toy out of thread

Felt crafts

Felt and decorative elements from it are sold in hobby shops. It is pleasant to work with him - he does not crumble and it is convenient to cut parts of any size from him. You will also need some filler for soft toys, glue, threads, beads.

Decorate the Christmas tree with a delicate ball with floral motifs. It will turn out if you glue the base with small felt flowers and beads.

From multi-colored pieces of felt, cut out the details of the future figure, sew along the contour, fill with filler. Small details (eyes, mouth) embroider or draw with a felt-tip pen.

How to make a felt toy (step by step)

The pattern can be almost anything. This master class will show the principle of working with felt using the example of an asterisk. We will need:

cardboard,
scissors,
felt,
needle,
thread,
braid,
small buttons,
ribbon.

Cut out cardboard patterns (hearts, stars, little men), cut out felt parts from them, decorate them with braid, buttons, stitch around the perimeter with a decorative seam, fill with filler, sew on a loop.

Multi-colored paper decorations

Even from such a simple familiar material, interesting Christmas tree decorations will turn out. There is a large selection of paper in original colors and unusual textures in needlework stores.

To make funny deer, cut out strips for the ball and details of the muzzle. Glue a ball from the strips, glue the muzzle.

Everyone can. An interesting material pattern and decorative elements will transform even such a simple craft.

Step by step master classes

Cut out 5 strips of paper as shown. Fold them with an accordion, glue the circles. Collect and fasten the bump.

from nuts

From hats from acorns, nuts, seeds, treated with golden paint or sparkles, it is easy to make original jewelry on the tree

Paint acorn hats on the outside with glitter paint, glue on the base, tie a bow to match, fasten the loop.

A large festive New Year's ball will turn out from walnuts painted with gold paint. Stick nuts on the workpiece, attach decorative leaves, tie a ribbon. Such balls can decorate a window or even a large city Christmas tree.

Smaller toys will be obtained from seeds according to the same principle. They will look very original on the Christmas tree.

Newspaper toys

Varieties of crafts

Christmas trees

Decorate your home for the New Year with decorations different forms. Christmas trees, stars, balls, sweets, snowmen, snowflakes, cones have not lost their relevance for many years.

new year stars

For a star, you will need the following materials:

3 equal pieces of wire
6 large cones, 24 small ones.

String the cones on the wire, fasten.

A few more stars:

Ideas:

This is the most popular Christmas toy. You can decorate the usual christmas ball, sticking lace and toned with paint. The ball, pasted over with beads of different sizes, looks elegant.

The variety of handmade is amazing:

If annually before new year holidays If you decorate a street Christmas tree with handmade toys, then these workshops are for you. You will discover new ideas and learn the secrets of making decorations for the Christmas tree.

Features of toys for big Christmas trees, which decorate the squares, streets of cities and towns:

large sizes of toys: not less than 20-30 cm in height for a regional-scale Christmas tree and up to 50-60 cm for giant city Christmas trees,
weather-resistant material (especially for the southern regions, but due to general warming, even in mid-latitudes, it may rain unexpectedly in December or January),
light materials, hollow structures (so as not to weigh down the Christmas tree branches).

Penguin, sheep and napkin chicken

Love what big crafts - toys for the city Christmas tree- can be done by the skillful hands of mother and daughter.

“I, Pavlova Elena Vladimirovna , I work as a kindergarten teacher. Every year, our children make crafts to decorate the city Christmas tree. This work was done with their daughter Polina, she is 6 years old. I saw the idea of crafts on the Internet, but there was no description of the work. Everything was invented by ourselves in the process of work. The result amazed everyone! We bring to your attention our little penguin«.

To make such Christmas tree toys you will need:

napkins in different colors
stapler,
balloon,
thick threads,
PVA glue and "Moment",
colored cardboard,
satin ribbon.

Working process:

We put several napkins together (3-4), fasten them with a stapler in the center, cut out a circle, and by crumpling to the center, we crumple each layer of napkins. It turns out a flower. (You can also watch a master class on flowers from napkins).

There are a lot of such flowers to make. It took us: 6 packs of 100 sheet napkins blue color and 3 packs of white.

We pre-prepared the basis for the craft: inflated the air, wrapped it woolen threads with PVA glue. Let it dry well.

We glued the ball with our flowers, giving the shape of a blue back and a white tummy (we used glue “Universal Moment”).

Then they supplemented the craft with elements of colored cardboard: eyes, beak, wings, legs. So that our “penguin” could be hung on a Christmas tree, we fixed a ribbon for him by tying it to the tail of the ball, which we left at the top.

Now our "penguin" flaunts on the city tree!

The work fascinated us so much that we also made a cute sheep and her girlfriend - a chicken - a symbol of care and motherhood.

Thanks to Elena and Polina for wonderful toys for the city Christmas tree.

Large street tree toys

bells

The first version of this toy is made of wire, decorated with twine. Decorations are plastic multi-colored balls and bright bows.

And this bell is made from… a curly flower pot! The white plastic base must be pasted over with pieces from. Tinsel is glued along the edge, and a loop is on top.

Balloons

Just look at what beauty came out of simple disposable plastic cups glued to an ordinary rubber ball. Cups can be used both transparent and made of multi-colored plastic. Tinsel is used as decoration.

And this ball is made of papier-mâché. An ordinary balloon, inflated with air, is pasted over with pieces of newspapers soaked in PVA glue. After drying, the craft becomes durable and strong. It can be decorated with paints, decorated with sparkles or multi-colored snowflakes.

Candy

This is a classic of the genre. The basis is a cylinder twisted from thick cardboard. It must be wrapped with shiny wrapping paper and make ponytails on the sides. Decor around the perimeter - satin or plastic ribbon.

Snowflakes

Two options from different material. A large white snowflake is cut out of a piece of thin polystyrene using a utility knife.

The second craft is glued together from newspaper strips. To do this, sheets of newspaper are cut along the long side into 2 or 3 equal parts, each folded several times to make a dense strip. The middle is folded from strips of equal width, and rays are glued to it. The top of the snowflake is painted with golden spray paint and varnished for durability.

Dog

The frame of the animal is cut out of hardboard or thick cardboard. The surface is yellow oil paint, you can decorate the craft with silver tinsel. This is a craft of 2018, by 2019 you can similarly make a symbol - a pig.

Asterisks

The first option is made from thick twigs fastened with wire in the shape of a five-pointed star. The frame is wrapped with tinsel, decorated with small multi-colored balls.

The basis for this star is cardboard, pasted over with a shiny fabric and blue tinsel.

The third star is completely made of natural material. The frame is made of twigs, as in the first version, only twine was used as decoration. In the center of the craft is a composition of spruce branches, cones and ribbons.

Boot

The toy is sewn of burlap, filled with padding polyester and decorated with white openwork braid. Additional decor is sequins, snowflakes, pine cones, gifts. Eco-style toys are very popular right now.

Caterpillar

Her entire body is formed from. The balls are covered with a transparent varnish on top so that the craft does not become limp under wet snow. Decor (eyes, beads, etc.) is made of fabric.

However, you can also make just balls from a dense cord:

snowmen

This is another option for using used disposable tableware. The cups are connected with a stapler, resulting in balls of different sizes. It remains only to glue the cap, carrot, eyes and put on a scarf.

And this snowman is made of white and blue fleece, its inner space is filled with padding polyester. In his hands he has a broom made of twigs. Here is such a neat snowman turned out.

All these toys can appear on your New Year's beauty if you work a little before the holidays.

The description of the crafts was prepared by Tatyana Yablonskaya.

Christmas tree toy from CDs:

Another option is .

Christmas tree toys « «:

Snowman in papier-mâché technique -

City Christmas tree toy plastic bottles"Workshop of Santa Claus" (more).

Giant cardboard toy "Reindeer"

"Christmas tree toy "Squirrel". Kulikov Kirill, 7 years old, Khabarovsk, secondary school No. 41.
Decoration on the street Christmas tree"Squirrel" is made of waste material: the foundation - nylon tights and sintepon, finishing - cut and glued foam rubber petals, covered with acrylic paints, contours, glitter.

"Christmas tree decoration". Svintsov Vadim Denisovich.
The Christmas tree toy is made of a foam ball covered with pine cones. The cones are painted in places with white gouache to imitate snow cover. Decorated with shiny snowflakes in silver and red satin ribbon bows with white beads arranged in a chaotic manner. A Christmas angel is folded from twine, which adorns the Christmas tree ball. With the help of a loop, a Christmas ball can be hung on a Christmas tree.

"Christmas Ball!" Abramova Varvara.
The ball is made of fiberboard, large diameter, for a street Christmas tree. For painting, we took ordinary gouache, after drying we painted snowflakes and decorated it with rain, after cutting it finely. Then varnished.

Despite the abundance of Christmas decorations on sale, there are more and more adherents of creating their own unique Christmas tree. The forest beauty, decorated with handmade Christmas decorations from improvised materials for the New Year 2019, can bring a special unique aura and the charm of magic.

In addition, this exciting activity, is able to unite the whole family in a single creative impulse, increase mutual understanding between parents and children. We offer you a selection of Christmas decorations, very simple in execution, but incredibly spectacular in terms of results.

Photo of Christmas toys from improvised materials

Christmas ball pig

Prepare:

Christmas ball;
hot glue;
Acrylic paint pale pink, black;
acrylic lacquer;
sponge;
tassel;
polymer clay - pink and white.

Making a Christmas tree toy in the form of a pig:

From the Christmas ball of any size you choose, remove the loop.

We paint the ball itself in a pale pink color using acrylic paint and a sponge, let it dry. It is very convenient to make several of these cute Christmas tree toys of different sizes at once.

After drying, we apply acrylic varnish to the ball to fix the paint and give the Christmas tree toy a smoother and shiny surface.

After the ball dries again, we insert the hanging loop, which was removed at the beginning, you can thread a pre-prepared ribbon into it, tying it with a spectacular bow.
We take any work surface on which we will create all the decor elements for a Christmas tree toy in the form of a symbol of the coming year.

First, take a small piece of pink polymer clay, knead it and give the shape of a patch round or oval shape, you can do both if you make several Christmas tree toys for the New Year 2019.

We attach the resulting patch in the middle of the ball, with a sharp stick or an ordinary pencil we form two holes on the patch.

From a piece of white clay, divided into two equal parts, we form eyes in the form of two flat droplets, attach them over the patch, close to each other.

Next, we take a small piece of white clay, divide it in half, give the two pieces the shape of small identical triangles.
From pink clay we make similar triangles of a smaller size, put them on white triangles, bend the tops slightly, achieving similarity with the ears of a pig, attach it to the top of the ball.

We make a sausage from a piece of pink clay, divide it into 4 parts, on one side of each part we make a notch with any object, so we get hooves. We also attach the legs to the ball, check that it stands steadily.

We remove all the details from the ball or several balls and send it to the oven for 15 minutes.

After removing from the oven, glue all the details to the ball with hot glue. Draw the eyes with black paint.

You can also continue the decor by applying "freckles" on the cheeks in any way.

Photo: Christmas toy pig

Christmas paper ball

Such a Christmas tree toy, made with your own hands from improvised materials, will decorate the atmosphere for the New Year 2019!

Prepare:

colored double-sided paper of different colors - 12-13 sheets;
scissors;
glue.

We bend each sheet of paper in half and cut out two circles with a diameter of about 14 cm.
We bend each circle in half, put all the halves in one pile, determine the middle from the rounded side and make a small notch with scissors.

We glue each circle from the inside at the notch, dropping a little glue.
From plain paper we cut out exactly the same circle as everyone else, bend it in half, then two more times in half. We unfold to the first bend, mark with a pencil the places of the last bend.

Again we collect all the bent semicircles from colored paper in a pile, apply a semicircle with notes, make the same notes on the first colored semicircle.
We remove the blank from plain paper, align the stack in our hands and make notches with scissors at the marks.

Applying glue to the places of the notches, we glue all the colored semicircles together, laying them on top of each other in turn.

After the glue dries, unfold the resulting structure, glue the first and last halves of the circle.

We got a great bright ball for our Christmas tree - simple and effective!

You can thread a piece of Christmas tree tinsel into the central hole, making a knot at the bottom. We hang several of these balls on the Christmas tree, made from improvised means with our own hands.

Ribbon Pig

A cute pig from improvised means will decorate the Christmas tree for the New Year 2019. And you can make it with the children using our photo master class.

Prepare:

a pink silk ribbon measuring 12 cm in width and 3.5 m in length, as well as two squares measuring 5 cm * 5 cm;
felt pink, square size 7 cm * 7 cm;
red or black beads - 2 pcs.;
lace - 30 cm;
small pieces of red and white felt or other dense fabric;
a needle with a light thread;
hot glue.

Manufacturing with step by step photos:

We sew the entire satin ribbon, having previously processed the edges with a lighter, in the middle with a basting seam, collecting up to a size of 26 cm, we fix the thread at the end with a knot.

From pink felt we cut out two circles, a base with a diameter of 5 cm for the muzzle of a pig and a base for a snout, with a diameter of 2 cm.
We make ears from small squares of satin ribbon, for which we bend each diagonally, and then twice more. We solder the junction with a lighter, cut off the bottom at an angle, process it again with a lighter.

We give the blanks the shape of ears, apply glue to the very corner, press it so that it looks more natural.

Now, in a small felt blank, we mark two holes with a black thread, making several stitches.
We bend the prepared cord, glue it to the felt base, glue two ears next to it.

We apply glue to the center of a large felt blank, glue one end of the assembled satin ribbon, then glue it in a circle, smearing the base with glue.

In the center we glue a blank for a patch and eyes - beads, a Christmas tree toy in the form of a pig is ready, it will certainly appreciate your efforts.

If desired, a Santa Claus cap can also be glued from red and white felt, glued on top. You can make toys with and without a cap for a change.

A photo

Glue snowflakes

Easier nowhere! And what a beauty from improvised materials!

Prepare:

silicone glue (gun);
white acrylic paint;
any glitter;
polyethylene, foamed;
paperclips.

Making a Christmas tree toy step by step:

Samples of snowflakes can be printed from the Internet, select several types you like at once.
Fasten snowflakes with paper clips with polyethylene, lay on the work surface so that the polyethylene is on top.
Lubricate each line of the snowflake with glue, allow to dry, remove from polyethylene.
Apply white acrylic paint to the snowflake, sprinkle with sparkles and dry.
Thread a beautiful lace or satin ribbon, decorate your magical Christmas tree with snowflakes.

Photo: Glue snowflake

Flower garlands from plastic bottles

Such a Christmas tree toy with your own hands can be made from plastic bottles, which is quite easy and simple. The final craft for the New Year 2019 will be the decoration of the holiday.

Prepare:

several plastic bottles with caps (depending on the size of the garland, but not less than 30–40);
sharp knife;
paints in spray cans;
scissors;
electric garland.

Manufacturing with step by step photos:

On all plastic bottles we cut off the tops, divide the cut surface into several segments, draw the corresponding lines with a pencil.

We cut the plastic tops along the lines with scissors, round the edges, shaping the stylized petals (the shape can be different, rounded or pointed).

We paint all the petals with multi-colored paint, showing imagination and creativity, leave to dry.
While the petals are drying, we make cross-shaped incisions in each lid, insert the light bulbs from the garland into the resulting holes.

Christmas decorations from pasta for the New Year 2019

Prepare:

pasta: spirals, wheels, horns, shells, bows;
glue moment;
PVA glue;
gouache paint titanium white;
brush for drawing;
any glitter.

Manufacturing:

We prepare the work surface, lay out the pasta different kind whimsical compositions, showing imagination.
We lay the pasta tightly to each other, glue the joints with glue for a moment, let it dry.
We cover the pasta snowflakes with white gouache with a brush, leave to dry.
We apply PVA glue to the surface of the snowflakes with a brush, sprinkle with prepared various sparkles. We dry and decorate the Christmas tree by threading a loop through any hole for hanging.

Christmas ball of ribbons

Christmas decorations do not always have to be difficult to manufacture, beautiful DIY products can be made quickly and easily from improvised materials!

Cook:

a foam ball, ready-made or cut from a foam blank;
multi-colored satin ribbons;
needles sewing thin with heads.

Manufacturing:

You can make such balls both in mono color and multi-colored. We cut several blanks from a satin ribbon 2.5 cm wide and 7 cm long, as well as a square 3 cm * 3 cm in size.

We fix a square of satin ribbon of your chosen color on one side of the ball with pins.
We turn each blank so that we get a triangle, we attach them on all four sides of the square.

We lay the workpiece so that the top of the triangle falls in the middle of the square, we fix the triangles with pins in the places where the tape is bent at the bottom on both sides.

We proceed to attach the triangles from the satin ribbon to the second row, placing them in a checkerboard pattern.

We fill the entire surface of the ball, close the remaining gap with a square of satin ribbon, attach a bow from the same ribbon or ribbons of a smaller width on top.

Photo: Here is such a beauty from improvised means

Christmas balls from disposable cups for alcohol

Prepare:

foam balls 7 cm in diameter;
small disposable cups - 17 pcs. (for one ball);
different acrylic paints;
tassel;
hot glue;
PVA glue;
any glitter.

Manufacturing:

We paint over all the cups with acrylic paint from the inside with a brush, dry it.
With white paint we make a bezel outside and inside, dry.
We apply glue on the outside and inside of the white bezel and sprinkle with sparkles.
We attach the prepared cups to the foam ball with a bottom lubricated with hot glue, placing them as close to each other as possible.
We are doing in free space on the foam ball, a small hole with a sharp object and insert the end of the loop prepared from any thread, grease with glue.
Similarly, you can make Christmas balls by gluing multi-colored cones painted with paint, as well as fluffy pompoms from knitting threads, to a foam plastic ball.

Herringbone from satin ribbons

Prepare:

blanks from multi-colored satin ribbons size: 2.5 * 5 cm, 4 * 7 cm, 5 * 9 cm - 15 pcs.;
hot glue;
pin for the base of a small size;
lighter;
loop from any Christmas tree toy;
scissors;
beads or rhinestones, as well as one shiny element to decorate the bottom of the Christmas tree.

Making with video step by step:

We fold each blank in half twice, we process the bottom with fire from a lighter.
We add the resulting blanks of three different sizes one on top of the other in descending size.
We fold the resulting structure in half, cut off the bottom at an angle and process it with fire. So we prepare all the elements, give them the shape of a stylized petal.
We glue the petals in 5 pieces, smearing the sides and pressing them firmly against each other. We will have three tiers for a Christmas tree toy.
We string all the workpieces on the prepared pin, smearing the joints with the workpieces with glue.
On top of the stylized Christmas tree, we attach a loop from the Christmas tree toy with glue.
From the bottom of the Christmas tree we glue a prepared shiny element or a large bead in the center.
We glue a bead or rhinestones in the central inner corner of each leaf, an incredibly stylish and elegant Christmas tree toy is ready.

Video of making a beautiful Christmas tree toy:

Christmas toys made of felt

Felt Christmas decorations amaze with their variety, they are easy to make and are an excellent decoration for a cozy home Christmas tree.

Prepare:

felt multi-colored segments;
multi-colored knitting threads;
a needle with a large eye;
beads, rhinestones, sequins, buttons and other similar decorative elements;
synthetic winterizer or cotton wool;
paper;
pencil;
scissors.

Patterns for Christmas toys made of felt (photo gallery):

Manufacturing step by step:

We put figures of animals or other objects on paper, cut out patterns.
We impose patterns on the prepared pieces of felt. If we make a toy from thick felt, then we cut out one part of each pattern.
If we manufacture voluminous toys from thin felt, then we cut out each figure in two parts.
We sew the details either from the inside, then turn them inside out, or we sew them with a decorative seam with multi-colored knitting threads with front side toys.
We fill the workpiece with synthetic winterizer or cotton wool, giving the desired volume, we process the open space.
We sew the appropriate decorative elements on the toys, showing imagination. You can also actively use embroidery, as well as decorative colored stitching, to decorate felt toys.
If we make a toy in the form of an animal, then we attach all the necessary details from improvised materials: eyes, nose, mouth.
We sew loops to the resulting bright and varied Christmas toys from felt and decorate the Christmas tree for the New Year 2019.

It is always said that what is made with one's own hands is more valuable than purchased, because a part of the soul is invested in this thing. And also you will have a hand-made thing only in a single copy, almost exclusive. You definitely can't buy this in a store. We have already done with you and.

Making Christmas decorations for the Christmas tree is a wonderful idea of how to feel the nagging feeling of anticipation of the holiday again. Infect others with your idea, please the child and show off your skill to your neighbor.

We will use only those materials that are always at home (if they have not already been thrown away).

It seems that such an interesting thing can be created from an empty babina? But fantasy does not let you get bored and we use it for the base for a Christmas tree toy.

Other improvised materials, such as toys from kinders, painted plastic bottle caps or twine, will be used to decorate it.

We will need:

Scotch tape reel
White ground paint
Styrofoam ball or small Christmas ball
Decor (beads, cones, ribbons, pendants)

1. We prime the bobbin in advance White color and let dry.

2. We take the ball and pierce it completely with a needle and thread.

3. Now we put a bead on the same thread first, pierce the bobbin, thread the foam ball, pierce the bobbin, and then the bead again.

4. We pull the thread and make a droplet for suspension and a decorative brush from below.

To do this, we wind the same thread on our fingers and tie it to the lower end.

We cut the bottom of the brush and tie it at the base.

How do you like the idea? Here are some more options for inspiration.

You can paint the bobbins in different colors or cover the walls using decoupage technique.

How to make paper Christmas tree decorations

My dears, I recently wrote an article on the topic New Year's crafts from paper, I will not repeat myself, you can read about it.

For example, glue or hang, made using the origami technique.

You can also make many loops of colored paper and glue them together to get a flower or a snowflake.

Snowmen from improvised materials: use light bulbs

Light bulbs fly into the trash immediately as soon as they stop shining. But from the bottom they make wonderful penguins and snowmen for the holiday.

I would only remove the inner core from all of them, a man will help with this. This is for more security.

First, we wipe the light bulb with any degreaser, even with nail polish remover, then paint it with white acrylic paint or a primer.

We draw a scarf, twig handles, eyes and a carrot nose with acrylic paints.

Glue a loop to the base for a moment.

You can make another version of the snowman.

Sew a cone hat with a loop, put it on the narrow part of the light bulb and glue it.

And on the wide part draw the face of a snowman.

Santa Claus and an asterisk made of cones

A very affordable material for winter needlework is cones. I know that they are simply painted, sprinkled with sparkles and used as pendants, but this is too simple for us, so let's start creating Santa Claus and an asterisk or a snowflake from them.

For grandfather you will need:

cone
tennis or foam ball
bead
red fabric

Tennis ball or styrofoam ball - this will be the grandfather's face.

1. We wrap it once with a cloth to understand how much we need it for the cap and cut it obliquely to get a conical shape.

2. We glue the cap, face and bead on top with a hot gun.

3. Glue the head to the bump.

4. We make a scarf from the same fabric.

5. We draw eyes and a mouth.

For an asterisk, we take five or seven cones.

From the cones we form a flower. We coat the central cone with glue with a gun and glue all the rest to it.

We make a mount from a ribbon or twine by gluing it to an asterisk with a hot gun.

Balls from plastic bottles on a street tree

About crafts from plastic bottles can be found here. But their application is so wide that it is simply impossible to stop and not create from them.

We will need:

1 bottle
Scissors
Glue gun
Braid, beads and other decor

1. We clean the bottle from the label.

2. Cut the body of the bottle into strips 1.5 cm wide.

3. We decorate each strip with braid and beads.

4. Then we begin to form a ball. We take two rings and glue them crosswise with a hot gun.

5. Then diagonally two more rings.

6. And we begin to decorate all sides.

It is done very simply and even with a baby you can decorate the sides.

Christmas crochet snowflakes

Openwork look very easy and interesting knitted snowflakes on Christmas tree branches.

Here are some knitting patterns.

Or such a scheme.

I think that you can crochet an ornament in five minutes. You can add a few matching colored threads to get not only pure white snowflakes, but also blue or festive golden ones.

Watch a detailed video on how to crochet snowflakes. Here they will also talk about single crochets and explain how much air loops needed to get a beautiful pattern.

Felt Christmas tree toys: New Year's sock with a pattern

Felt has also long been loved by needlewomen. It holds its shape and is easy to both sew together and stick.

We will need:

Sheet A4
Two pom poms
White thick thread

1. First, draw a sock template and cut it out.

2. Fold the felt in half and circle the template on it.

3. Along the edges with wrong side make a strip of glue with a hot gun and glue both parts together. We do not glue the top, but we touch the loop.

4. We make a lapel on socks made of white felt or plush, 8 cm wide.

5. We also glue on both sides with hot glue so that 1 cm sticks out from the top end.

6. We will turn it inside and also glue it. This is how the bottom cut will be processed.

7. Glue the pompoms.

8. We sew the entire sock along the edge with a decorative stitch with white or gold threads.

You can take this pattern.

And you can experiment yourself.

Do-it-yourself plastic bell for kindergarten

Treat the kindergarten tree with a beautiful bell. And we will make it too plastic bottle. If we used its middle on the ball, then we will take the remaining neck on the bell.

You will need:

1 bottle
Lace or Braid
Leg-split
hot gun
beads
thermal gun

1. Cut off the top of the bottle, pierce a hole in the lid with an awl.

2. We glue the entire surface with twine.

4. We thread the twine into the hole in the lid, stretch both ends inward and tie a knot - this is a loop.

5. Now we make a bell tongue from a string of beads. Glue the middle inside.

Work the hot glue carefully so as not to melt the plastic.

A quick toy made of threads with your own hands on a Christmas tree for the street

A quick decoration for a street Christmas tree is done in five minutes. The main thing is to understand the principle, and the rest is a matter of technology.