Tie on the rubber band is a very comfortable thing, especially for boys younger and high Schoolwho have not yet learned to tie the ties on their own, and moms simply lack this time.
Let's look at how to sew the most ordinary school tie on a rubber.
Take an ordinary sheet and make a pattern on it. Dimensions can be different, that is, we choose the length and width of the tie.
On line, where we say the fold is written fold a leaflet.
Cut the pattern.
Here we got the pattern.
Desgreg on the oblique line.
Glue on the pattern of flolymin.
We fold the tie along the fold line and sew from the wrong side.
We fold our pattern on the floors and flash.
Soak our workpiece and flying.
We proceed to the manufacture of a tie node. To do this, measure the width of the top slice tie.
I cut the width tissue strip for the node, which will be equal to two widths of the top slice of the tie, which we have already measured. Length arbitrary, but not less than 10 centimeters. Correct the length in the process.
Just glue on this piece of flolymin.
We fold in half and flash from the wrong side.
We fold the strip as shown in the picture and refer to the seam line.
We fold as shown in the picture and flash.
Turn out through the knot and straighten.
Now your son will be beautiful among their peers.
In order to sew a tie on an elastic band, the first thing you need to decide on the material and get a gum of a suitable exactly in this case color.
I suggest you sew a tie from slag fabric, so we need the following from materials for sewing:
But the template (pattern) for our tie with you:
Sewing process:
Let's try to sew a tie on the rubber band. It's not hard! We will need to make the pattern for the tie and the gum itself.
Ties on the rubber band call herded. They easily dressed and worn, this is popular. For example, boys often dress them. Also such a tie is part of the uniform.
To make the pattern, the following parts will need: the main part of the tie, the tie node, the front of the gum, the lining corner.
For a tie of 37 cm long, we take fabrics 40 40 cm.
In this sewing, everyone performs by obliquequot ;::
We perform a lining part of the picking, nodal part:
The gum is represented by one front part and two side. Front - from the main fabric, and the side - from the liner.
Front and glue Wallowed, fold. On the sides stitched with lubrican rubber bands.
Similarly to the part of the node.
From the inside of the main detail of the tie apply a fitting, lining nodes.
The future knot is striking, getting a loop.
The main part of the tie is converted and passed on the reverse side.
I used to think that tailoring ties - It's hard, but after I decided to sew a tie, it turned out that it was much easier than I thought!
Immediately, I would like to make a reservation that it was necessary to sew a tie, but it does not mean that the way I suggests is handicraft.
In order to master and find out what technology sewing tiesI had to look into one high-quality worn tongue.
What do you think? This is how and learn - we break and study the latest innovations in the field of technology. No one will tell you how it is done - everything is pursuing.
Another point. Tie corners can be processed differently. In this post, I will not paint how to do it - it will be in the following posts.
It is described here all sewing and sequence without processing ends.
Technology tailoring Ties Next:
1. We take a thick canvas and cut it clearly on the pattern of a tie. He will give him a form and not to crush.
One piece, most likely, will not work, because It is necessary to cut at an angle of 45 degrees, so cut with the joint and connect it later.
2. Now harvest the loop.
To do this, cut the strip of fabric by oblique, width, approximately 4 cm. We fold this strip facial side Inside and spin pins.
3. We deposit the line in the center of this strip.
4. Soak on the front and affect.
6. Steadmate and decompound the seam allowance.
Facial:
7. Now put the foundation from the canvas in the tie, straightening the corners.
Canvas should hold tight in the corners!
In the center piercing pins.
8. We rinse, thus fastening both parts, and remove the pins.
9. And now a very responsible moment comes!
Many will not understand why it is impossible Make like this:
Those. Start from the inside tie and twist it.
At first, I also did not understand. Although, when you break the old instance, I saw that he was sewn manually. But I quickly wanted to finish everything
But, as once again I was convinced that "hurry - people embarrasses."
I so stupid, turned, and ash!
The tie was carved in oblique, and therefore his threads are a very complex system. If a little up-down, left-right, then the oblique chances begin. It looked very inaccurated and bad.
I had to redo the way it was done on the signature store and the timing of the sample.
And do it:
Fix the edges of Pins based on pins, and we temper the patch seam pin. Then we wist well so that the binder is not visible.
10. Now we need to sew a loop that will keep a short end inside from involuntary peeking from under the top.
For this, at a distance, approximately (better to visually, try and look at the "body", it depends on how the length of the tie should be with you), 30 cm from the bottom of the wide part of the location of the loop.
The loop is sewn manually, not through, and capturing only the top layer of fabric and can still canvas.
The second side we rush the pin so that the loop is not tightly sewn, and so that there was a gap for the narrow end of the tie (sewn, too, manually).
11. Now we fasten the edges on the narrow end of the tie.
And on the Broad end, we make the same leaf.
And so closer it is clear what a lines.
12. We still make the scourge in one stitch over the loop. Approximately 1-1.5 cm above.
It is necessary to have a tie, when the inner end of the tie will constantly, then be in the way, then pull out.
13. Worked-worked and here he is a tie with his own hands!
And again, nothing complicated tailoring of the tie does not represent.
Modern woman has long taken various accessories from male CarderobaBut sometimes such accessories want to do, such as a tie or butterfly and today we will tell you how to sew a tie.
In fact, it is easy if you have at least some sewing skills. First, pick up the pattern suitable for the style of clothing with which you intend to wear this male accessory.
It can be developed independently, given the width, length, as well as the form of the node. As a basis, you can take our drawing.
Even easier, if you take an unnecessary tie your husband, will dispel it and make a pattern.
By the way, learning to sew ties and butterflies, you can make a unique gift to your man - a refined tie to a strict costume or a joke tie with cool picture or commemorative inscription.
So how to sew a tie?
Take the cloth, spread the pattern on it. At the same time, keep in mind that the tie should only lie on oblique, otherwise it will not be properly lying. Cut out the workpiece from the material. Do not forget about tight fabric laying. As a basis that is embedded inside the tie, a piece of canvas tissue is perfectly suitable on the pattern. It is not bad for the tie to be soloked, however, to save material, it is better to sew it from two parts. Shave tolerances should be at least a centimeter. Next, take both parts of the tie yourself, connect and scalle from the bottom of the seam, which then you need to run, and then trust. Treat both corners. To do this, mark the borders based on the tie. The same lines should be transferred to the lining. Corners based on starting. On the front side of the base, impose a corner of lining, pinched by pins, and then carefully burst, flexing the edges of the fabric. Similarly, the first, pull the second side. Then the corner turns and go through the iron. Insert the foundation in the tie, straighten the corners, in the middle, fix the pins and sweep. Next, secure the edges of the allowances of the pins, and in the middle do the invoice, counted seam. Squeeze the details of the tie himself. You can use the machine, but the copyright ties sew solely manually. Stop loop. By oblique cut the fabric strip about 4 cm wide, fold it with the front side inside, and then scaline pins. In the center of the strip laid the line. Remove and pass the iron. Next you need to sew a loop not throughout, but only grabbing the top layer of material. Seving the second side, leave the clearance for a narrow end. Your tie is ready.
How to sew bow tie
The butterfly tie is considered stylish accessory, funny decoration, as well as a cute gift. It is enough to choose a suitable tissue and start taking. Today we will make a "false" bow tie from the usual tie - such a butterfly do not need to be tied, it is enough to fasten it on the neck.
So you will need:
- tie the color you need;
- black gum (about 20 cm long, 15 mm wide) or Velcro tape - 20cm;
- scissors;
- threads in tone.
1. Remove the tie in the wide part. Usually it includes the main and lining tissue, as well as a special thick gasket that gives the tie density.
2. Clear 2 squares 10 * 10 cm from the main and lining fabric. Do not forget about the stamps on the seams - 1 cm.
3. Check the identical part of dense tissue, where there are no allowances for the seams.
4. Fold the front sides of two squares. Load the line along the pair of opposite angles (the distance from the angle of 8 cm). The remaining pair of angles do not sharpen - the detail of the butterfly is formed through them. Remove and put the gasket.
5. Wrap the corners with holes on the side of the inside from the butterfly and secure several stitches manually. 
6. Take out the main fabric strip 11cm * 4cm, width in finished form - 2 cm. Collect the part of the butterfly to the stitches in the middle, fasten through the stitches, wrap 2 times with a strip from the main fabric, and then reincate the outflow.
7. Wrap the butterfly angles inside out, about 3 cm wide, fasten with several neat stitches.
8. From the main tissue, select the strip 22cm * 3cm, width in the finished form - 1.5 cm. 
9. Side butterfly manually to the middle of the strip. A rubber band with the size of the collar clawing in a shirt to the free ends of this strip. At the ends of the gum attach hooks. Instead of gum and crochet, you can use tape velcro. 
Tie is an important part of the business wardrobe, a sign of a good taste and "significance" of its owner. A good tie costs a lot, so the question of how to sew it with your own hands is always relevant.
This article is intended for persons over 18 years
Have you already turned 18?
We make an elegant tie with your own hands: the main tricks
Before proceeding with the phased production of this sought-after accessory, you need to decide what exactly you eventually want to get. Variations on the topic of the tie is quite a lot and each type of manufacture is attached to the manufacturer. The most common accessories options are classic "rent" and an elegant butterfly tie. But this is not the entire list, because there is a narrow tie "herring", and a tie broom, and Bolo, Lavalier, and Windsor, and a cervical handkerchief. By the way, there is a lot of contradictions with the last type of accessory, because the word "tie" itself has French roots and translated into Russian sounds like a "neck scarf".
The pattern of a tie is simple, because it can be done even without having special devices and templates at hand. How? - you ask. Yes, it's very simple - enough to dissolve old unnecessary tickle on the seam. He will be the very pattern that you can transfer to the selected fabric.
When preparing, it is important not to forget about the tissue "Doubles". It is necessary in order for your future product to hold the form and not revealed with every touch. You can choose a conventional lining fabric or fleece for the role of "Dubler" - these are the most inexpensive and affordable options. You can also buy a self-adhesive fabric - Frierizelin. In order to attach it to the fabric, it will be enough for you to attach it to the wrong side of your workpiece with a brilliant layer and well to go around it with a hot iron. Just a few movements and your product will find the desired rigidity.
Tailoring is also a very simple process available even inexperienced needlewoman. At the same time, it all nominates sew we accessory on sewing machine or manual seam, the main thing is to know how to put it beautifully and consolidate (and the rest is the case of technology).
Another important question When sewing a tie (as actually and when designing any product) - how to properly prevent a unwanted "shrinkage" of the fabric? In order to have a presentation as a sewing material will respond in the future to washing and ironing, all these processes should be made before it is cut. At this stage, you should definitely know what to prepare in the future and what to pay special attention to.
The tie is the subject of the casual wardrobe, it is very important to take into account when choosing that tissue to sew this accessory. It is most practical to be products of cotton, flax, silk and satin - it is on these tissues to stop their choice (for festive options There are no restrictions in the choice of materials).
Universal accessory: a little story
As mentioned earlier, the word "tie" has a French origin, however, the world-famous accessory himself was done yet by the British. It is with them light hands It became a very important "status" detail of the business wardrobe. This male accessory has long ceased to be simply an accessory - this is also an indicator of the status and public situation of its owner. The neck scarves and in our time have a fairly wide price variability - from several hundred rubles to a pair of three thousand dollars.
The popularity of the adult tie immediately repeated and children's analogue. Weekly families sought to buy it for a boy so that he gets used to from childhood to a fairly uncomfortable, but the necessary accessory.
After the sexual revolution, which occurred in the middle of the last century, a female tie appeared. Contrary to popular belief, he gave his owner not to her own shafts. On the contrary, a woman with "removing" on the neck is always stylish, sexy and little bit boldly.
So gradually the tie entered the daily use of almost the entire population of the globe. No one now sees anything reprehensible in tie a tape for a girl in the form of a tick or an elegant butterfly.
Among the whole diversity of children's ties, which are customary to wear school, I want to highlight the zipper option. His feature is convenience, because it is not necessary to tie it (tightened or dissolved zipper and all things). Therefore, if you want to make a comfortable school accessory - pay attention to this model. As for the colors of children's ties, it can be both strict blue or black options and more fun colors (from Harry Potter, for example).
How to make a tie from paper?
If you need to make this popular accessory very urgently or you need it for some contest, the ideal material can be the usual paper. The easiest option is a bow tie from a napkin. For him, it is enough just to take a conventional napkin, folded it like the harmonica and copp in the middle.
No less popular products made in the Origami style. Just a few right movements - And the elegant tips in your hands ( detailed instructions How to do it with ease you will find on the Internet).
You can also make a tie-deception from ordinary cardboard and gum. Draw a silhouette of the future product, cut out, attach the lumber and ... Ready!
How to make a tie from the tape?
Make from satin ribbon A fashionable product is not only very simple, but also inexpensive, and the result is just a otmanized. The uniqueness of this material is that it looks equally well in any option, whether it is classic leaving, butterfly, brooch or "sled". Whatever you choose, the product from satin ribbon It will look very worthy. You can also make cute tips from trimming satin fabric. However, when we sewing the product from this material, do not forget to process the edges - without this manipulation they can "sprinkle".
In addition to the "human" options, beautiful decorations for the bottle are also obtained from the tape. Cute gestures from felt or satin can be decorated with champagne at the wedding or "male" drinks on the corporate. By the way, when preparing a festive cake for your beloved man (brother, friend, boss) you can also decorate it with a pretty tie of mastic. It will look incredibly stylish and be sure to enjoy the perpetrator of the celebration.
How to sew a bowbow?
"Butterfly" or bow is a classic shape of a tie, without which it is impossible to introduce an evening version business suit (and not only). Make it very simple - take a small rectangle from the fabric and pull in the middle. Thus, you get a butterfly, which can be worn on an elastic band or just pinch to the shirt of an English pin. This is the easiest way to make a bow, but far from the only one.
You can use both simple sewing and more complex techniques, such as Kazan and Origami. The first option is to compile a whole composition of individual flaps, the second - obtaining the desired result by repeated bending of the tissue. Internet shot by various lessons to use these techniques.
In the World Wide Web, you can also find the pattern of a classic "butterfly", which you need to tie yourself (on the likeness of the pioneer tie). About how to make a beautiful right knot of such an accessory Many of us know no bleak - once the red flavors of the fabric was a real pride of the Soviet child.
If you want to stand out from the crowd - try making a tie. This is an unusual product from a thin cord that is bonded by a big brooch. Bolo can become an excellent addition to both the everyday image and to the festive - it all depends on your chosen outfit.
Tie is suitable for new Year's suit. On corporate party, for example, it is not necessary to wear a boring office option. For such a case, funny models for clown will be equally appropriate, and elegant cervical shawl Stewardles, and some causing gates styles.
Hello, friends.
Last year, I sewed classic skirt In the fold for the niece. In the process, it turned out that she likes ties as an addition to school uniform.
I wanted to please the student not only the skirt and sew a distinctive.
On a note:Building from video MK will help you make cuttings not only for a child. The basis is perfectly suitable for cutting a male or female tie. It is enough to increase the values.
Skirt and tie are sewn from costume tissue of which, woolen fiber. It was nice to work with such a material.
Several facts about tie
Pattern Tie for Schoolboy
In my case, almost all the material "gone" on. There was a small piece from which the tie was sewn.
The pattern was built, focusing on the ties of the son and her husband, and also pushing out of the interests of a small customer.
I had to deviate a little from the classic sewing and cut. What you can't do for the joy of loved ones.
Note: Due to lack of main fabric, I collected a tie of three parts. You can carve one entire part of the main material. Or collect tie from 2 parts. Look for the option that best suits your conditions.
Cut the cut in a straight line, the tie sewed from two parts.
Important.The top of the main part of the wool, I duplicated the detail of the lining fabric. This method is radically different from classic sewing.
The second, narrow item is completely made of lining.
In the process, the two parts for decoration and fixation in the loop of the narrow end of the tie. I wanted to do "for real" nice.
Tailoring Tie
IMPORTANT! Before paving the line, do not forget to put a loop from the lining fabric, retreating from below 10-12 cm.
Assembling tie
To assemble a tie, threatening inside the cuts along the short edge of the main detail, it is suitable.
I also do a tip.
I collect a tie, putting the second part inside the main part of the short cut and inside the tip, laying the line from above. The width of two parts must match. 
I lay off the loop on both sides of the tie, root and gently take advantage of the secret stitches. Tie a knot.
Tie ready. Together with the skirt turned out a great set. You can add different models Blouses, shirts and every time it looks new even in school uniform.
Tie ready.
Together with the skirt turned out a great set. You can add different models of blouses, shirts and look in new way every time even in school uniform.
p / S If you like and useful publications on the site, press the socket buttons. Networks or use other forms of gratitude. Thank you.
With faith in your success and wishes of good luck,
Elena Krasovskaya
