The period of cold weather is not a reason to neglect stylish way for the sake of inclement weather.
The basis of a winter wardrobe is.
Jackets, fur coats, coats, shapeless down jackets will be transformed if the image is supplemented with an interesting hat.
The modern world of fashion from season to season demonstrates original versions of this item of clothing. One of the successful trends long time a turban hat is considered.
The breeze of Eastern culture has more than once poured into the life of Europeans. Each time, it firmly lingered on the first positions of fashionable tops. Today knitted the turban is popular again.
Turban - headdress of men of the East. The well-being of the owner is assessed by its color, material. Over time, women began to use it, complementing precious stones, decorations.
Historically, other names for the turban were formed:
- Amoma (imam) is meant for the higher clergy. Sheikhs, imams wear it.
- Dastor is a festive attire. It is used by representatives of the nobility, rulers.
- Futa is meant for the people. She is dressed by merchants, artisans, ordinary city dwellers.
The cap is often called a turban. They are wrapped in almost the same way around the head. The length of the turban fabric is shorter, and its edge is even. This is the main difference between them.
In the photo knitted turbans and turbans:
Another name among the people is sultanka.
For the convenience of European fashionistas, designers have come up with ready-made hats of the same shape. They are made from different materials according to the season.
| Turban type | Peculiarities |
|---|---|
| Bandage |  Easy to perform. Doesn't require a high level of skill from the knitter. To make it, a minimum of steps will be required: measuring the size of the head, choosing a pattern, calculating loops, knitting density. |
| Traditional turban hat | A more difficult option to perform. Covers the entire head. The set of actions for making it is the same. Knits different patterns... Ahead is the traditional binding, knot. |
The turban has come a long historical path before its modified form was presented to us. Such a knitted product rightfully occupies a leading position in fashionable tops.
What is needed for knitting, beauty of creation
Knitted turban is a versatile piece for the head. In addition to the winter season, it is worn in spring, autumn, even summer. The density of the product is regulated by the type of yarn, the size of the knitting needles, the knitting method, the pattern. The quality of the hat depends a lot on the tools used to create it. Choosing the right materials is the key to a quality product.
| Tool | Season | Recommendations |
|---|---|---|
| Spokes | Winter | A version of a hat for cold weather, as a rule, is knitted from thick yarn. The required needle thickness is always indicated on its label. Usually use # 5, # 6, circular. |
| Spring Summer | For the warm season, knit lighter options from fine yarn. The needles should be of a smaller order - No. 2, No. 3, No. 4. | |
| Hook | Winter, spring, summer | It is used not only for manufacturing, but also for stitching a product. Choose according to the directions on the yarn packaging. |
| Yarn | Winter | Wearing during cold weather suggests that the garment will be warm. For him, it is worth choosing wool yarn with bulky threads. You can create original combinations. For example, add merino, alpaca wool, kid mohair to semi-wool. This will provide extra warmth. |
| Spring, autumn | In the warm season, thin, cotton threads are used for manufacturing. For example, iris. The yarn must be of natural origin. |
Simple options for debutants
Some novice knitters are intimidated by the image of the product, which gives the impression of a difficult task. Due to the perceived level of difficulty, they postpone the knitting pattern, depriving themselves of the original outfit. There are a number of options that are very simple to implement. Even a person without much experience can realize them. It is enough to be able to hold the knitting needles in your hands, to know the front, purl loops.
From a scarf
The simplest, but no less original option is a scarf turban. To complete it you will need:
- Paired needles. A denser version will be obtained with the help of # 5.
- 2 skeins of thick yarn (50x50 wool with acrylic). You can add mohair, lurex for shine.
Legend:
- l - front loop;
- and - purl loop;
- n - yarn;
- cr - edging;
- p - row;
- p - loop;
- ** - product rapport.
The main fabric is knitted with a classic elastic band. On the working knitting needles, an odd number of loops are recruited according to required size... Description of the header scheme:
- 1st row - 1 cr, * l *, 1 cr;
- 2nd p - * l, n, 1 p to remove on the knitting needle (thread at the back of the work) *;
- 3rd p– * n, 1 p to remove without knitting, l + n together *;
- 4th p and subsequent repeat according to the pattern.
In this sequence, knit about 90 cm.Then wrap the resulting scarf around the head, twisting it in the middle. Sew the free ends to the canvas. Use a needle or crochet to sew a seam in the middle.
For a snug fit, the edges can be crocheted to the head.
After completing the sewing work, the scarf hat is ready.
Simple way number 2
Second easy way creating an original header, for which you will need:
- Knitting needles number 5, number 6.
- Thick yarn (wool, mohair, acrylic).
Legend:
- l - front loop;
- and - purl loop;
- p - row;
- p - loop;
- ** - product rapport.
Cast on an even number of loops on the knitting needles. How to knit with your own hands according to the scheme:
- 1st row: 1 cr, * 4 l, 4 and *, 1 cr.;
- 2nd and subsequent rows: repeat along the pattern.
This sequence is worth following depending on the desired size. Then join in a ring. Place the resulting product with the crossed ends up. Then sew them onto the remaining canvas.
The video shows full version creating a simple knitted turban:
With the addition of loops
For this model, thin knitting needles are used. The yarn is chosen depending on what time of the year the product is supposed to be worn.
Scheme for 12 loops:
- 1st p: l;
- 2nd p: and;
- 3rd p: * 1i; 2L *;
- 4th p and all even: according to the picture;
- 5th p: * 1 and 2l cross to the right (knit the 2nd loop with the front one for the back wall, without removing it from the knitting needle, and the 1st for the front wall, remove it on the second knitting needle) *.
Repeat the rapport for 8-10 rows (approximately 4 cm). Then start adding loops: in each front row, add 5 loops evenly between crossed loops. Thus, knit 28 rows (12-14 cm). Continue with the scheme without increments. After 5 cm of fabric, start decreasing: in each purl row, knit 2 loops between the crossed ones. The remaining 4 cm follow the pattern. Close knitting by any in a convenient way... The product is ready.
We use English gum
The main pattern for - an elastic band from 4 purl, 4 front.
Choose yarn depending on the season of wear.
The needle number will be shown on the thread label.
The approximate amount of yarn is 200 g.
- Measuring the volume of the head.
- Calculation of the number of loops. Divide the resulting volume in half. The result is the width of the header.
- Cast on the loops on the working knitting needles. Consider 2 edging.
- Tie the elastic to the required length.
- Close the loops.
The photo on the right shows what a turban hat with an English elastic band might look like.
To form a turban from knitted products, you should cross its ends, take them back, attach to the main canvas.
Master class on how to tie an English type elastic band:
Beautiful relief
simple embossed knitting pattern
The pattern repeat should be a multiple of six stitches. Excluding edging, another central one.
The canvas must be at least 10 cm wide.
After a set of loops on the knitting needles, mark the central thread of a different color.
Remove the thread after knitting.
To create a high-quality product with a raised elastic band, you should use some tips:
- 1st p (front): 1 cr, * 1 p to remove not knitted, 1 and, 2 l *, 1 cr.
- 2nd p (purl) and all even: 1 cr, * 1 p to remove not knitted, knit according to the pattern *, 1 cr.
- 3rd p (front): 1 cr, * 1 st to remove not knitted, 1 and, 2 sts crossed *, 1 cr.
- 5th row and all odd knits according to the third pattern.
After five centimeters of the canvas, it is necessary to make additions between the reliefs.
To do this, in each row, five purl loops are evenly tied.
After adding, six loops should be obtained in the side parts, and eleven in the central parts.
Then a uniform decrease is carried out.
Close the loops, sew the product.
From the picture on the left, you can understand what the embossed elastic band on the turban looks like.
The pattern is especially noticeable on light-colored yarns.
We make different designs come true
Bandage
One of the most simple options turban knitting needles for girls in this style.
You can knit it from any thread in your favorite way.
One of the most interesting patterns is pearl.
After determining the width of the product, calculating the required loops, you can start working.
It is better to use circular knitting needles. This will shorten the knitting time, as the process will be much more convenient.
The fabric is knitted in a circle of the required length.
After closing the loops, twist the product in the middle, sew with a needle, crochet.
The dressing is ready.
The video details how to tie a turban-shaped bandage.
Curvy shape
For a fluffy turban with knitting needles, thick yarn with an additional thread of mohair is best suited. Knitting needles are required at number 5. Knitting of the main fabric is performed with an elastic band according to the following scheme:
- Cast on the required number of loops. Work 56 cm (approx. 100-110 rows). Close the loops, leaving a large thread. It will be required to fix the product.
- Connect the resulting rectangle. It must be sewn in the middle. The elastic should not stretch.
- Sew the product with a neat seam on top.
- Collect the foreground of the turban with a separate thread. This will form a decorative knot.
- In order to collect the edge of the cap, you need to use a needle and thread to go through the usual seam along the entire perimeter. Then tighten the thread.
Before assembling the canvas into a single product, it is steamed. Thanks to this, the edges are clearly visible, and the hat is especially lush.
With pattern
For beautiful pattern fine two-tone threads are suitable: 45% wool, 55% acrylic. Paired needles # 5. The hat will be in several shades of gray. Their alternation in a herringbone pattern creates an original headdress.
A picture describing the creation of a knitted turban:
How to knit:
- 1st r: cr, l, and, l, * knit in a pattern of 20 loops *, l, and, l, and, cr.
- 2nd p: cr, and, l, and, * knit according to the pattern *, and, l, and, l, cr.
Then, about 50 cm, repeat 1-2 rows. Remove the first color, attach the second. Continue knitting. Once the required length has been reached, the loops can be closed. To get the finished product, one part of the canvas is folded in half. The second is threaded inside the formed ring. Both ends are sewn together. It turned out to be a spectacular version with a pattern.
Crochet
The turban, made, is a wonderful option for winter, autumn. It can be combined with clothes of different styles. The most harmonious version of such an outfit is knitted from thick yarn, crochet number 4. Depending on the chosen pattern, you can create several original hats.
Light scheme
The chosen thread should be thick. It is used to knit a cloth like a scarf. Initially, you need to dial a certain number of air loops. Standard set - chain 90 cm.
Legend:
- 1 item b / n - one single crochet;
- 1 st s / n - one double crochet;
- 1 air n under - one air loop lifting.
How to crochet:
- 1st p: 1 air p under, 1 item b / n in each loop;
- 2nd p: 2 air p under, embossed columns with crochets;
- 3rd p: 2 air p under, embossed front columns with crochets.
Then, for 12 cm, there is an alternation of the second and third rows. After two rows, knit with single crochets. Close knitting.
The product is sewn according to the scheme.
In the video, a master class for crocheting a turban:
Openwork
Crocheted openwork patterns look very impressive, presentable. Their use is a modern option. winter dress... The following guidelines should be followed when creating an original copy:
- The choice of threads, knitting needles. The yarn is selected in medium thickness. The hook will fit # 4.
- The number of required loops is calculated.
- Air loops are crocheted.
- Knitting according to the scheme.
- After completing the pattern repeat, you should get a canvas with a length of 40-45 cm.
- Then the knitting is divided into two parts with an equal number of loops. Work continues. The same pattern is knitted on each half.
- It is necessary to assemble the product. The crossed halves should be carefully sewn by the edges. From the seamy side, with an inconspicuous seam, grab them at the very base, fasten them to each other.
Crochet pattern:
We sew correctly
The knitting process is a laborious task. This is only half of the way. An important point is the assembly of all parts into a single whole. For a well-made outfit, you need to do the following steps:
- It is worth starting from the height of the cap. Cast on the needles. There will be 24 loops (for example). Then knit a row equal to half the circumference of the head.
- Divide the resulting loops into equal parts. The left side of the product should be removed with an additional knitting needle, secured with a pin. Add four rows of loops to the right side. Then swap the halves, returning them to one spoke. Knit left loops.
- Close the row.
- After that, knit with a pattern " english gum". After 8-10 rows, go to the usual one with alternating front, purl loops.
- Form the bottom of the cap. Knit two rows of stockings.
- Perform decrements. Knit stitches together in several rows.
- Alternate regular knitting with decreasing loops. As a result, there should be eight of them on the canvas.
- Pull off the last loops with a thread.
All parts of the garment should be well steamed before final sewing. During the stitching process, you can apply a semi-finished sample to the head, marking the areas for the stitches. The amount of needle work depends on the holes created during knitting. The ideal version of a turban of medium complexity has four seams: an average horizontal, one vertical on the sides, and a vertical one in the middle.
Sometimes you will have to wield a needle very little. It is enough to fasten a couple of sections.
After the performed manipulations, the diligent knitter will be rewarded with an exclusive knitted masterpiece.
What to wear with: let's try to guess
A turban can go well with business, everyday, festive images... She will create an accent, become a highlight. Due to the variety of textures, colors, patterns, you can create many options for any output. Hats in natural shades are welcome: beige, gray, brown, blue, green. The choice of color may depend on the season, event, mood.
Knitted turban is a warm, cozy accessory. It will fit perfectly into your everyday wardrobe. On a winter day, it can be worn with a warm jacket, fluffy mittens, comfortable boots. In the spring, wear with a coat and high boots.
If you plan to go to a festive event, then an openwork turban with stones, brooches or beads will perfectly complement your evening look.
Business negotiations in a strict trouser suit and a nude hat will be an overwhelming success.
The color of the cap can be matched with outerwear, shoes, other items of clothing. They can also differ from each other by several shades. This is a truly versatile headpiece. Original cut, the decor will add a touch of oriental mystery to the chosen image.
On the picture different variants combinations of a turban hat with other elements of clothing:
Turban is a historical trend. From year to year, he appears in the shows of famous designers. Unique fashion accessory diversifies the wardrobe, will surprise others with its originality.
The turban or turban cap was borrowed by women from the oriental male dress. She creates majestic and mysterious image... To knit such a hat with your own hands, you need a little time, yarn and enthusiasm. A knitted turban hat whose description we offer in this article will warm you in cold weather and will be an original highlight of your style.
For work we need:
- angora yarn with mohair in the composition (500m per 100g) -100g;
- straight needles number 3.5.
The patterns used for the turban cap:
- convex elastic:
1p .: 1krom., * 1 life., 2 persons. * - from * to * the whole row;
2p .: according to the picture;
3p.: 1cr., 1 life., Next. knit loops like this: first, the second one behind the back wall of the front one, do not remove it from the knitting needle. Then knit the first knit stitch behind the back wall. We repeat with our own hands, using this description to the end of the row.
How to knit a turban
The turban hat is knitted from the back. Dial 18p. and tie 4cm with a convex elastic band. Then in each person. in a row we add 5p. We knit a turban up to a height of 16cm. Then we knit 5-6cm exactly. Then we make reductions mirrored to the previous additions: in each person. row 5 times 2p. we knit purl. There should be 18p on the needles. We divide the knitting into two equal parts and then we knit each of them separately. When the turban reaches 28-29 cm in total length, close the loops.
Assembly
Cross the front parts, sew the short parts with a knitted seam. Sew this detail onto the turban.
The next model is knitted even easier than a turban with knitting needles.
Winter turban (turban): video master class
Cap hood
The model can be used as an addition to a cardigan or as a separate item of clothing.
Designed in two sizes: for a head circumference of 48.5 cm and 53.5 cm.
Product length 25.5cm.
To work you need:
- h / w yarn (100g / 107m) - 100g;
- direct cn. No. 6 and No. 6.5;
- additional knitting needle for the pattern.
Patterns used:
- cross of 5 loops (2/1/2) - P5: remove 3p. before work, 2 persons., removed p. we knit 1 life., 2 persons;
- persons. ch .: in odd rows - faces. loops, in even ones - out.
Knitting density:
- on persons. ch. knitting needles No. 6 14p. for 21 rubles. equal to a square of 10cm by 10cm;
- based on pattern cn. No. 6.5 15p. for 20 rubles. equal to a square of 10cm by 10cm.
Description
Knitted cap the hood is knitted according to the pattern.
Dial cn. No. 6 75p. and link the faces. ch. 7.5cm. We finish with the purl row. Further, the cap the hood is knitted on the cn. No. 6.5 by description:
1p.: 1l, 1i., 2l., * 1i., 1l., 1i., 1l., 1i., 1l., 1i., P5 * -repeat from * to * for the whole row, except for the extreme 11p. , 1i., 1l., 1i., 1l., 1i., 1l., 1i., 2l., 1i., 1l .;
2p .: 2l, 3i., 1l., 1i., 1l., 1i., 1l., 1i., * 2i., 1l., 3i., 1l., 1i., 1l., 1i., 1l. , 1i. * - repeat from * to * to the extreme 4p., 2i, 2l .;
3p.: 1l., 1i., * 1n., Decrease to the left, 1l., 1i., 1l., 1i., 1l., 2p. - in 1p., 1n., 1l., 1i. * -From * and up to * to the last item, 1l .;
4p .: 1l., * 1l., 3i., 1l., 1i., 1l., 1i., 1l., 3i. * -From * to * to extreme 2p., 2l.;
5p.: 1l., 1i., * 2l., 1n., Decrease to the left, 1i., 1l., 1i., 2p. in 1p., 1n., 2l., 1i. * - from * to * - until the last. p., 1l .;
6, 8,10,12 rubles: 1l., * 1l., 5i. * - until the last. 2p., 2l .;
7p.: 1l., 1i., * 3l., 1n., Decrease to the left, 1i., 2p. in 1p., 1n., 3p., 1i. * - until the last. p., 1l .;
9p.: 1l., 1i., * 1n., 2p. in 1l., 3l., 1i., 3l., decrease to the left, 1n., 1i. * - until the last. p., 1l .;
11r.: 2l., * 1i., 1n., 2p. in 1l., 2l., 1i., 2l., decrease to the left, 1n., 1i., 1l. * - to the last. p. 1l .;
13r.: 2l., * 1i., 1l., 1n., 2p. in 1l., 1l., 1i., 1l., decrease to the left, 1n., 1l., 1i., 1l. * - to the village. p. 1l .;
14 rubles, 16 rubles, 18 rubles: 1l., * 1l., 1i., 1l., 3i., 1l., 3i., 1l., 1i. * - to the village. 2p., 2l .;
15r .: 2l., * 1i., 1l., 1i., Cross of loops, 1i., 1l., 1i., 1l. * - until the last. p., 1l .;
17r.: 2l., * 2i., 1l., 2p. in 1l., 1n., 1l., 1i., 1l., 1n., decrease to the left, 1l., 1i., 1l. * - all items, 1l .;
19r.: 2l., * 1i., 2p. in 1l., 1n., 2l., 1i., 2l., 1n., subtract to the left, 1i., 1l. * - all p., 1l .;
20 rubles, 22 rubles, 24 rubles, 26 rubles: 1l., * 1l., 5i. * - all items, except 2 extreme, 2l .;
21r.: 1l., 1i., * 2p. in 1l., 1n., 3l., 1i., 3l., 1n., subtract to the left, 1i. * - finish 1l .;
23r.: 1l., 1i., * 3l., Subtract to the left, 1n., 1i., 2p. in 1l., 3l., 1i. * - finish 1l .;
25r .: 1l., 1i., * 2l., Subtract to the left, 1n., 1i., 1l., 1i., 1n., 2p. in 1l., 2l., 1i. * - finished. 1l .;
27r.: 1l., 1i., * 1l., Subtract to the left, 1n., 1l., 1i., 1l., 1i., 1l., 1n., 2p. in 1l., 1l., 1i. * - finished. 1l .;
28r .: 1l., * 1l., 3i., 1l., 1i., 1l., 1i., 1l., 3i. * - finished. 2L.
Knit rapport from the 1st 28th p. up to a height of 24cm (26.5cm). At this stage, the cap of the hood should end with a purl row. In each of the next 6p. we subtract 9p. Remains for knitting 21p.
We close the loops.
Assembly
The hood is folded in half vertically. Then we sew the two halves. We make with our own hands 2 pom-poms approximately 8 cm in diameter and sew them along the corners of the front. Another pompom, larger - about 9cm in diameter - we sew on the top of the cap.
Hat snood hood knitting: video master class
Not every craftswoman will dare to knit a turban. However, the scheme seems difficult only at first glance. Let's look at several patterns that even novice knitters can do.
Model first knitted turban
Knitting pattern No. 1. Materials for work: knitting needles No. 3.5, yarn - about 100 gr.
Description of the raised elastic pattern:
- 1P. The first and last loops are edging. Between them - 1 PI, 2 LP - we repeat this sequence in the whole row;
- 2P. As it shown on the picture;
- 3P. 1p edging, 1 IP. Further, the loops must be tied as follows: 2nd LP (behind the back wall), it is not necessary to remove it from the knitting needle. 1st LP (also behind the back wall). We continue to knit in this way to the end of the row.
We begin work at the back of the turban. The sequence of steps can be viewed in the proposed video. We dial 18p. According to the "convex elastic" pattern, you need to knit 4 cm of the canvas.
Next, we begin to add loops - 5 pcs. for each front row. Thus, we continue to work until the canvas becomes 16 cm long.After that, we continue knitting without adding. We will reduce the loops mirrored - on front side 5pcs each (knit 2 PIs together 5 times). We finish when 18p remains on the needles. We divide them into two parts and knit them separately. We close the loops after reaching the total length of the product 28-29 cm.
Assembly. Assembling the turban correctly is just as important as making it. The front sections are criss-crossed and sewn with a knitted seam. Then you just need to sew the first part to the second.
Video: Winter turban
Model of the second knitting turban
The next turban with knitting needles is a more simplified scheme. Knitting it is just a pleasure. This is knitting pattern # 2. We choose a thicker yarn so that the product is more voluminous.
An elastic band is used as the main pattern. How to do it, you can learn from the videos presented on this site.
We collect 30p on the needles. 28 of them are the main pattern, and 2 are edging. We will knit with an elastic band according to the scheme; 4 LP, 4 PI. The width of the resulting scarf will vary from 18 to 25 cm. The length should be about 120 cm, after which the loops must be closed.
We stand in front of the mirror and start assembling the turban. We start from the back of the head, cross the ends on the forehead. From the top of the head, the ends will go to the back of the head. There they must be fastened with a hook. Our knitted hat is ready.
Scheme three: simple and tasteful
We offer another description of an interesting hat for your judgment. This is diagram # 3 in this tutorial. It will require about 90g of yarn and knitting needles # 4. The hat will fit size 56-58. We will knit with a patent elastic band according to the attached drawing.
In total, you need to knit a rectangular scarf with dimensions of 11 * 100 cm. You can add decorative shiny braid to the basic knitting to the yarn to make the turban a little more varied.
Now all that remains is to assemble the product. The cap is formed from the rim. We wrap the head with a scarf, cross the ends on the forehead and put them on the back of the head. Sew on them, collecting a little. We make a seam in the middle of the head. We straighten the crossed ends.
Scheme four: oriental flavor
A knitted hat will be sewn from the bottom and the turban itself. The width of the latter is 10-12 cm.
Description of the main figure taught by scheme No. 4:
- 1R .: 1 LP, 1 PI - along the entire length of the row;
- 2R.: Opposite each LP it is necessary to knit LP, before the PI we make a yarn over, the PI itself - we remove it;
- 3P. (+ subsequent): tie LP and NK together, make a yarn in front of the IP, remove the IP itself.
For the desired width of the product, we type 24p. Knit with the main pattern until its length is equal to half the circumference of the head.
We divide all the loops into 2 parts and knit 4 r on one of them. After that, we place the longer part on top of the short one, as if crossing the parts, swap them. We collect all the loops for 11 knitting needles and continue working. Close the tabs at the end.
Cast on loops in an amount equal to the length of the strip, tie with an English elastic band 8 r. and an elastic band 1 * 1 - 2.5 cm. Go to the bottom - use hosiery... The bottom must be steamed. The cap is sewn on the back.
Video: Options for knitting a turban with knitting needles
A hat in an oriental style will look better on you if you make it a little looser. When choosing a yarn, pay attention to a thicker one, and take knitting needles as large as possible. A turban with knitting needles, decorated with a brooch with hangings, turns out to be very effective. Such a simple technique very well supports the oriental style of the thing.
Any turban consists of a scarf itself, which is crossed and sewn in a special way. The pattern should be along the scarf so as not to spoil the product. Choose the scheme very carefully so as not to spoil the appearance of the turban with an incorrectly selected pattern. When crossing the ends, try to straighten and arrange them nicely.
Photo MK
Video: Turban with a pattern
Fashion is a cyclical concept, since things that were relevant many years ago are now returning to our lives and are becoming very popular among women who carefully monitor their wardrobe. Similarly, the turban hat has become popular again. It is not necessary to buy it in the store, you can knit this headdress yourself with knitting needles, since the scheme is very simple to perform. Let's take a closer look at how to knit a turban and a turban hat.
Knitting a turban for beginners
The turban will reliably protect your head in cold weather and add oriental flavor to your look. This model will be knitted with an English elastic band of thick woolen threads and knitting needles number 2.5.
A knitted pattern can be made according to the following scheme: the first row begins with one front loop, then the purl buttonhole follows. Continue this alternation until the very end. The next strip begins with a purl yarn, which is then removed without knitting, and then all the front links are knitted. In the third strip, as in the subsequent ones, a thread is cast in front of the seamy side, then it is removed without knitting, and faces. the item together with the yarn is knitted together with a grip from above.
The turban is made of two parts. The first part is the turban itself, and the second is its bottom. The height of the product is ten centimeters. Cast on twenty-four stitches and tie a line that is half your head and minus two centimeters. After that, divide the links in half, and transfer the left side to the pin and leave it intact for a while. From the right side, tie four stripes. Then swap the two sides. From the pin, move the links back and knit the second part. When the desired length is reached, close all the knitting eyelets.
Now type in the links so that the line is the entire length, and knit eight rows with an English elastic band, and then 3 cm with a simple elastic band. The next part is to make the bottom of the piece. You need to knit 2 p. double hosiery in which persons. etc. are knitted with the face so that they are on top of the wrong side. You need to make four rows, and then front 2 p. in a double way. The last six loops must be removed. The bottom of the turban is steamed using a damp cloth. At the end, the headpiece is sewn back together. In such an easy way, you can make a simple turban for beginners with knitting needles.
Hat - turban knitting
To knit a hat - a turban, you need to purchase woolen or acrylic threads of medium thickness. The product will look original if it is made with melange or tweed threads. You also need straight knitting needles number 4.
Hat - a turban is knitted from the middle of the back of the product to the side. This is very easy to do. As a result, the component part of the accessory looks like a rectangle that must be sewn in an unusual way to get what you need. You should cast on fifty-eight stitches with knitting needles. The first row is done in this way: first there is an edge, then two faces. n., two out. p. Continue to do this to the very end, finishing the strip with an edge. Now mark this row with a marker to orientate where the seam should be. After that, perform an elastic band two by two, twenty-seven centimeters high. At the end, mark again with a marker, but only already in the middle of the front part. Tie another twenty-seven centimeters of elastic, two by two. Having done this, you will see a blank, which will look like a rectangle, 55 cm long. Close the remaining knitting links according to the figure. The yarn needs to be torn off, leaving a long edge for the connecting stitch.
Last but not least, the turban hat is folded inside out. The end of the yarn that remains is inserted into the needle and sewn on the right side with a knitted stitch. The place that should be sewn is indicated with a marker. Turn out the hat and bend the corner of the top towards the back of the head. It should be sewn on with a blind stitch from the inside of the turban. That's all, the product is ready, now you can try it on.
Video: Lesson of knitting a turban with knitting needles
Such a model of hats is called a turban, but often you can still find the name - turban. Small, but warm and voluminous hats are suitable for almost all women, and therefore they never go out of fashion. Despite its rather intricate appearance, knitting such a hat with knitting needles is not so difficult.
Scarf hat
The first method of knitting a turban cap is more suitable for beginner needlewomen.
In order to make this fluffy and warm wonder you will need:
- paired knitting needles No. 5;
- two skeins of thick yarn (50% acrylic, 50% wool). You can take threads with the addition of mohair, as long as they are thick. Approximate weight - 100 gr.
To create a description of how the header fits, we will use the following designations:
- lp - front loop;
- un - purl loop;
- n - yarn;
- cr - edging;
- p - row.
The main type of knitting is English elastic. It has one secret: you can only knit such an elastic band in the classical way, you cannot knit loops with the "grandmother's" method, otherwise the pattern will not work.
Lush turban
The third way is how to make a fluffy turban hat with knitting needles. Here, again, thick threads with mohair and knitting needles number 5 are more suitable. This method is also suitable for beginner needlewomen. You just need to tie the rectangle with a 2x2 rubber band.
We collect 62 p. The scheme is simple: 2 LP, 2 PI. We knit like this about 56 cm. It will be about 110 rubles. Having closed the knitting, we leave a large tail of the thread, they will need to sew a hat.
We connect the rectangle so that it is sewn in width. It is important here not to stretch the elastic, to pick up the edges so that the stripes do not diverge. You will get a wide rim around the head with lush folds. We now connect it from above and flash it. Let the stripes at the top stretch. It is important to use a separate thread to gather the canvas in the front in the middle, so that you get the "knot" of the turban.
You can make the rectangle an uneven rubber band. At the same time, it will only need to be knitted 40-42 cm.An example scheme: Cr, 10 PI, 2 PI, 4 PI, 2 PI, 4 PI, 2 PI, 4 PI, 2 PI, 4 PI, 2 PI, 4 PI , 2 SP, 10 LP, Cr. On the wrong side, follow the drawing.
When all the volume is done, we close the loops. You can do 4p at the beginning and at the end of knitting. front satin stitch. Now just thread the turban in front and back. To do this, simply with a thick thread threaded into the needle, weld the edge of the rectangle with an ordinary basting stitch and tighten. We carefully sew the resulting ring, bending it in half. It turns out a lush, beautiful hat, as in the last photo.
Do not forget that our hat becomes softer, and the pattern looks smoother, before stitching any of the models, the knitted fabric must be steamed. So the edges will be clearly visible, and it will become easier to assemble the hat into the turban.
Video: Technique of knitting a turban with knitting needles
Turban knitting patterns
To give an image of femininity and sophistication, many fashionistas complement their style with a turban. Making a turban with your own hands is quite simple and at a minimum cost in time. Turban, or turban, as it is also called, became popular in the 40s and is now a popular piece of clothing. The perfect combination of a turban with long dresses or pantsuits adds style and originality to the image.
Surely many women of fashion thought about the question of how to sew a turban with their own hands. It turns out that everything is quite simple and easy. First of all, you need to prepare all the necessary materials and set aside a little time. It is better to choose a material for a turban with a light structure so that folds can be laid freely.
To sew the product, you will need a small piece of fabric, thread, a needle and scissors. First of all, you need to take measurements and transfer them to paper. If you have sewing skills, then you can go straight to the material.
Master class on how to sew a turban with your own hands:
- A pattern is being made. The material is folded in half and formed rectangular shape... The top corners need to be rounded. The size of the pattern is 60 * 30 cm.
- If the loose edges of the fabric have not been finished, you will need to hem them.
- The top and side edges of the turban are sewn together. The lower part remains loose.
- When the edges are sewn without tying a knot, pull the thread slightly so that there are slight folds on the garment.
- For the convenience of forming a turban, you need to put the product on a dummy or a jar.
- We collect the sides at the back of the product and fasten with a thread. The edges should be symmetrical.
- You need to fasten the sides in parts, making folds. To secure the sides, you need to make three stitches or folds.
- The remaining fabric is cut so that there is little material left for finishing.
- The material in the back of the product is wrapped inward and secured with a thread.
- It is better to correct the seamy edges and sew them tightly.
You can try on the product.
To make the turban hat look more neat and original, you need to correct the facial seams.
How to tie a turban?
The master class on how to tie a turban with your own hands is very simple, the main thing is to trust your imagination and allocate some free time.
Moreover, knitting is a good sedative, gymnastics for hands and significant savings Money... If the necessary yarn and knitting needles are at hand, then you can start knitting a turban with knitting needles:
- It is best to knit the product with an elastic band. Initially make 6 loops.
- 5 loops are added to each next row.
- The widest edge is knitted without adding loops. The edge should be about 5 cm wide.
- After 5 loops each must be removed from the edges, and the product will gradually equalize.
- The outer loops are divided into two equal parts and knitted separately in the form of a ribbon. The length of each tape is about 30 cm.
- The resulting ribbons are crossed and stitched along the edges.
If you follow this scheme, the question of how to tie a turban yourself disappears by itself. You can add jewelry, a brooch or other accessory to the center of the turban.
Knitting gives a large area for experimentation, the main thing is patience and a little imagination.
How to make a turban out of a scarf?
Anyone can make a turban with their own hands from a scarf, even a schoolboy. To form a new attribute of clothing, you need to pick up a scarf with straight rectangular lines. It is best to use items with a light fabric texture.
First you need to close your head with a scarf so that the ends of the product are located at the back. The residual ends are neatly knitted into a knot. In order for the accessory to hold well on the head, you need to fasten the scarf on the head as best as possible.
The ends of the scarf are twisted separately and fixed on the head near the frontal part, after which they are wrapped together in the form of a knot. The rest of the tail is brought out to the back of the head and tied together.
If you get long loose ends, they can hang down from the back, thereby complementing the image. To decorate the turban, you can use various accessories, brooches and beads.
You can use original and bright scarves for the turban. However, regular square products for shaping a turban on the head will not work. It is necessary to select sufficiently long rectangular scarves.
If the scarf is not long enough, you can combine 2 scarves with different colors. This will add brightness and originality to the image. Before forming a turban, you need to tie them together in an original or less noticeable knot.
Using the above schemes for how to make a turban, you can complement your image with an amazing and extraordinary zest. To add an oriental look, you need to complement the image various accessories and massive earrings.
Women's headdress in the form of a turban was very popular in the 20s of the last century. The turban was sewn from velvet and silk and decorated with expensive stones. Turban again at the peak of popularity, but simpler materials are used for its manufacture. Try knitting the original hat yourself.
How to knit a turban - choose knitting needles and yarn
Consider the following when choosing knitting needles and threads:
- for winter hat choose bulky wool. You can take thin woolen threads with the addition of silk. Pleasant shine will remind you of the oriental origin of the turban;
- for a turban for the autumn-spring season, buy cotton yarn. Give preference to threads with a natural composition and knit a turban with an openwork pattern so that it is not hot;
- Select knitting needles as recommended by the yarn manufacturer. The yarn label has the information you need. It is advisable to knit a warm turban on circular knitting needles. For thicker threads, use number five knitting needles.
We knit a turban with an elastic band
The main pattern will be a 4x4 elastic. Prepare 200 g of yarn and knitting needles. Let's start knitting hats:
- measure the circumference of the head through the crown of the head from one ear to the other;
- divide the resulting number in half and calculate the number of loops. This will be the width of the header. Typically, the width of the turban is 18 to 25 cm;
- dial the calculated number of loops on the knitting needles. Do not forget about 2 edge loops;
- knit a 4x4 elastic band for a scarf 80-100 cm long with the required width;
- try on a turban while knitting so that it fits snugly to your head;
- close the loops, knitting to the required length.
Form a turban out of the product. Connect the edges of the resulting scarf with a ring, twisting so that the ends are on the top of the head and go to the back of the head. At the back of the head, secure them with a needle and thread or a crochet hook. At the crown of the head, join the ends of the garment with a seam using a crochet hook. Complete your headdress with a beautiful brooch and boldly go out in it.
We knit a turban with a beautiful pattern
Type on the needles the number of loops, a multiple of six, so that the width of the strip is 10 cm.Add one loop for the symmetry of the pattern. Start knitting a relief pattern:
- 1 row - alternation of one purl loop with two front loops;
- 2 row and all purl rows - knit according to the pattern;
- 3 row - knit one purl. Knit the next two loops like this: take the second one by the back wall, but do not remove it from the knitting needle. Tie the first loop behind the front wall and remove it;
- repeat the pattern from 3 rows and knit so 4-5 cm;
- start adding between the reliefs of the elastic. In the front rows, add purl loops 5 in a row. Do this until there are 6 loops in the extreme sections, and add up to 11 loops on the main sections;
- knit 5-6 rows without adding and proceed to evenly decrease the loops. Knit them 2 together.
You can make a strip of this pattern around the edge.
We knit a turban bandage
This is the easiest way to create a header. You will knit her quickly. Knit a two-layer bandage from thin threads. We measure the circumference of the head, and determine the width of the product. The wider - the more beautiful and warm. Use circular knitting needles. Knit a bandage in a circle, like a sleeve, in any pattern. An interesting option is pearl knitting or front surface... Do not add loops. Tie a strip of the required length, twist the bandage once and sew the edges with threads. The original turban is ready.
Complete your look with a turban, knitted with your own hands. It can be worn with a fur coat, down jacket and jacket. Attach an original brooch to your hat and you will look stylish, to the envy of all your friends.
Womens knitted hat-chalma - the trend of the last year, but this season such an accessory remains very popular. First, the turban model itself is unusual and original. Secondly, it also emphasizes elegance. In addition, a knitted turban hat is suitable for fur coats, coats and jackets, which speaks of its versatility.
Women's knitted hat in the form of a turban
Today, designers offer a fairly wide range of knitted turban-shaped hats. The main difference between these models is the yarn. Also, a knitted turban can be presented in an unusual way of knitting or an original color scheme. Often, designers choose stylish additions for a knitted turban hat, which emphasize individuality in the image. Well, let's see which models are the most popular today?
Knitted wool turban hat... The most common are wool products. These hats are also the most affordable for pricing. Indeed, often acrylic thread is added to all woolen things or they completely replace natural yarn with synthetics. Of course, this fact is not a plus in terms of health. But if you consider that a knitted turban hat is a seasonal accessory, then this is not a big drawback. However, both wool and acrylic knitted turban hats look neat and beautiful.
Knitted mohair turban hat... This style looks very stylish and feminine from fluffy airy yarn. A mohair knitted turban hat adds seriousness and elegance to the look.
In the 1920s, the turban became an ultra-fashionable accessory. The headdress itself was originally from the East and was exclusively for men, but the Art Deco era breathed new life into it. One of the great designers of that time was very fond of oriental ethnic motifs and styles: trousers, lampshades, kimonos and, of course, a turban (or turban). All Parisian women of fashion were obliged to have this accessory, made of silk or velvet and richly decorated with stones, pearls, feathers.
Things are a little easier today. The turban does not have to be made of expensive fabric, and stone jewelry is almost bad manners. A knitted turban looks most relevant. Consider how to knit a turban with knitting needles (the description will be further).
Choosing yarn and knitting needles
Turban is a headdress, so you need to choose the yarn that you would use for For the winter, you can choose a thick, voluminous wool yarn... In combination with embossed knit or large braids, the thing will turn out to be very relevant. You can also use fine woolen yarn with a dash of silk. The light shine of the linen will give a reference to the oriental roots of the headdress.
How to knit a turban with knitting needles with your own hands for the off-season? For spring and early autumn, you can knit a turban from cotton yarn. Try to choose a thread that is natural so as not to harm your hair and scalp. It is better to choose an openwork pattern so that it is not hot.
Types of turbans
Turban can be made in two types. One, simpler, looks like a bandage around the head. This is distinguished from a conventional bandage by the imitation of a "branded" knot on the forehead. This accessory is more adapted to everyday wear, it can be combined with parkas and down jackets.
The second option is made in This accessory is warmer, completely covers the head. Such a turban can be made in a casual style, and it can also be worn with casual clothes, or you can knit a classic or even an evening version.
Turban bandage
How to tie a turban bandage? Such an accessory can be knitted in just a few hours. If you want to knit a headband of fine yarn, but still warm and windproof, it can be done in two layers. Start with calculations, measure the circumference of the head and decide on the width. The turban-bandage should not be too narrow, the wider, the more impressive it will look.
If you decide to make a two-layer bandage, then you can use circular knitting needles for work. Knit the product in a circle, like a sleeve, but without adding loops. Having knitted a strip of the desired length, twist the bandage once, and sew the edges. The turban bandage is ready!
You can choose absolutely any pattern for knitting, but since the product itself is quite bright and original, it is better to stop at or pearl knitting.
Turban-hat tied with an elastic band
How to knit a turban with knitting needles with your own hands? We will knit a turban hat with a 4x4 elastic pattern.
First, let's make a calculation. Measure the circumference of your head from ear to ear through the crown of your head. Divide the resulting number in half and calculate the number of loops. This is the width of the item.
Knitting resembles a scarf, the length of which will be about 80-10 cm. But during the process, try on the product on yourself so that the turban fits snugly.
Having finished knitting in a straight line, connect the ends of the resulting strip into a ring, twisting (or knotting) in the middle with knitting needles, crocheting or using a needle and thread. Now connect the inner sides of our strip starting from the base at the neck. Knowing how to knit a turban of a simple model, you can experiment with patterns and different types of knitting.
Turban hat with embossed pattern
Cast on the needles so many loops that the strip is 10 cm wide. The number of loops should be a multiple of six plus one more loop for the symmetry of the pattern.
- In the first row, we alternate one purl with two front ones.
- In the second and in all purl rows we knit according to the pattern.
- In the third row we knit one purl, and the next two loops we knit like this: first the second one behind the back wall, without removing it from the knitting needle, knit the first one by the front wall, and remove from the knitting needle.
Knit four to five centimeters with this elastic band. Now we begin to make additions between the reliefs of our elastic band. We add purl loops in the front rows, five in a row. We add until there are six loops in the outer sections, and in the central sections we add up to eleven loops. Now knit five to six rows without additions and also begin to evenly decrease the loops, knitting two together. Along the edge, you can knit a strip of embossed elastic. How to knit a turban hat with knitting needles detailed description, can be found in any handicraft publication, but if you already know the basics, working on more complex models will be easier.
What to wear with?
Now you know how to tie a turban. And with what to wear it? Turban made in casual style, can be worn with insulated parkas, down jackets, short fur coats, both natural and faux fur... A light, strict turban goes well with velvet jackets, elongated sleeveless jackets, woolen coats.
The turban is a traditional headdress for the inhabitants of India, Africa and other sultry regions of the Earth. Ethnic motives used in sewing clothes quite often. Designers are attracted by the unusual shapes and materials from which the peoples of the world once invented various styles... Such a headdress is available not only on high fashion catwalks - everyone can repeat this unusual model from scrap materials. Knitted woolen or acrylic turban hat is popular among needlewomen. You will find a description of the process of working with photos and diagrams in our article.
What to wear with
In appearance, this headdress evokes a strong association with the Eastern world, snake charmers and the desert. This is what attracts many fashionistas. Fans of non-standard wardrobe details will like its exoticism. The coat of the simplest cut will sparkle with new colors, coupled with a similar accent.
A knitted turban hat is suitable for almost any shape of the face and head. Let's look at the description of successful and stylish combinations together. Of course, such a hat is ideal for women with an oval face and high forehead, but this is not at all a prerequisite.
Now the turban is worn not only by representatives of the Eastern world and Muslim women, but also by European fashionistas. Also, the turban is habitually combined with a boho-style wardrobe. but modern fashion breaks all stereotypes and canons. Nowadays it is not uncommon to see a girl in a turban and in a short dress or a sundress on the street. This choice is often made in the summer, when the sun is especially scorching. In this case, the headpiece really protects from overheating and completes the summer look.
A turban with a floor-length evening dress looks elegant and stylish. Even famous divas on red carpets use this accessory. There are countless more options with which this accessory can be combined: with a classic office suit and shoes, with a strict knee-length dress, and even with jeans and a T-shirt. It is a matter of taste, which option will suit you.
List of required materials
For experienced needlewomen, there is nothing easier than a knitted turban hat. A description of the materials used is not required, because they can be found at home at any craftswoman who, in the slightest degree, knows how to use the basic tools for hand-made. So to with my own hands to create an unusual headdress, you need to take:
- 150 grams of yarn of any thickness and shade;
- standard needles 2.5-3 mm, which will correspond to the thickness of the threads.
That's all! No more magical rituals are required to get started. You can tune in to a creative mood, pick up a brooch or other decoration and start knitting the canvas itself.
Knitted turban hat with needles: scheme and description
Even if you've never dealt with knitting needles and yarn, it's not too late to learn a new craft. Moreover, this model does not have daunting patterns and hard-to-reach details. Beginners in needlework will be able to easily cope with the task at hand.
Many are familiar with how difficult it is sometimes to find a suitable headdress for oneself - either the style does not suit the face, or the shade does not fit the coat. When preparatory stage The choice of threads is behind, our knitted turban hat will already be half finished. The description of the knitting process scheme will be described in detail below.
Turban knitted: a description of how to sew a finished fabric
So, all the materials are in front of you and there is a great desire to make a fashion accessory with your own hands. Then let's get started:
- We pick up the turban height (approximately 24 loops), and then we knit a row, half the circumference of your head minus 2 cm.
- Divide the loops equally. We remove the left side of the canvas with an additional knitting needle or pin and set it aside. Add 4 rows of loops to the right. Next, we change their places and put all the loops on one knitting needle to knit the second half of the strip.
- In order not to spoil the drawing, where two identical loops meet, we knit together, and at the end it is necessary to make an increase. We close the row.
- Next, we knit 8 rows using the "English elastic" pattern, and the next 2.5 cm we use the "1x1 elastic" pattern.
The bottom of the product is done like this:
- We knit 2 rows using a stocking knit.
- We knit a couple of front loops together - this is a series of decreases.
- The next 3-4 rows - ordinary stocking knitting.
- Then 2 rows - double stocking knit (we combine 2 loops together).
- Pull the last 8 loops.
The bottom of the headgear can be steamed using damp gauze. This is a simple scheme for creating a hat that you cannot buy in a store.
What will you get
The charm self made in the uniqueness of each product. One of these masterpieces is a knitted turban hat. We have already reviewed the description, the photo of the finished hat, but it will not be superfluous to admire once again how famous women exquisitely combine their outfit with an unusual headdress.
Now you know how to knit a turban with your own hands and what to successfully combine it with. Creative inspiration and light loops!
I started to knit here according to this description, but then I slightly corrected it for myself
5.
If you are not knitting for yourself, then it is advisable that you have such measurements
I will knit from yarn Yarn: UNITY LIGHT VITA. Composition: 48% wool, 52% acrylic. Skein weight: 100 gr. Length: 200 m. Knitting needles # 5, 2 strands for size 57 (head circumference, 36 (depth).
The tracks are connected with a French elastic band, here the video shows well how to knit
I cast on 16 stitches = 14 stitches French gum+2 edging and knitted 4 cm. My width is 10 cm. More is not needed. Since I know from experience that at the bottom of 12 cm it will already be wide. Then I start adding 1 loop between the tracks. I make the first addition with a crossed yarn, and on seamy side knit facial. There will be small holes, but this is not scary, they are at the bottom, and in the future we will add differently and there will be no holes. I will add through 1 front row until I have 5 out of purl lanes. loops, since my yarn is thick (I knit in 2 threads). If I added in each front row, then the expansion will happen quickly and I will not be able to keep within 12 cm. Whoever knits from thinner threads needs to be added in each front row.
You need to add once at the beginning of the purl, and a second time at the end. This is so that there is no bias.
And so I knit until I add 5 worn. loops. Then I add in each front row. I add another 1 loop = 6 loops in the purl. In the next front row, I added another 1 out. loop = 7 loops, but already in the outer tracks did not add, but only in 4 middle ones. I don't need to add more. You should get 34-36 cm
The main thing is to keep within 12 cm. This is without the initial 4 cm. Next, we knit 6 cm straight, without additions. Then we begin to decrease in the same order as we added, and for this we also have 12 cm.After the decrease, only the loops of the French elastic should remain on the knitting needles, without the purl loops.
6 cm was knitted straight, then 12 cm was subtracted. Here's what happened after subtracting. I will knit strips 26 cm long.In any case, you need to try on or know the measurements - divide the head circumference in half and minus 2-3 cm
Light loops to all !!!
The history of the appearance of the turban and turban comes to us from the ancient culture of the eastern peoples. The general image of these hats has some similarities, but they are different garments. A turban is a fairly large piece of fabric that is wound around the head. It is of considerable size and completely covers the forehead. Turban is more easy option turban, while the forehead in this model remains open and has the shape of an angle. Since this product has become fashionable, it will be interesting to knit a turban with knitting needles. The knitting pattern for such a headdress is not very complicated.
Performing a turban hat
The diagram and description of the turban with knitting needles is presented. This model can be used in two variations, it is worn with either side to the face. For a head circumference of 56-57 sizes, you need:
- thick twisted yarn - 100 g;
- charcoal yarn for processing - 20-30 g;
- hook number 3;
- knitting needles number 4.5.
On the knitting needles, dial the number of loops equivalent to 56 cm of garter stitch and make a turban in the form of a hemisphere, the height of which is 30-31 cm.Thus, first you need to knit 5 cm in a straight line, then reduce by a loop on both sides of the work at the end of all rows in length 10 cm of knitted work.
Decrease further: first, two loops in all rows, initially 6 cm high; then three loops at the beginning of the row 6 cm high; then closing in turn 4, 5, 6, 7, etc. loops - in several steps. After the knitting needle is 10-12 cm of the product, close the remaining loops at once in one row.
Lay the finished fabric of the product in half and sew starting from the top of the edge of the fabric. Sewing, make 3-4 folds or tighten the entire seam tight. Crochet the edge of the turban in a circle with six rows of single crochet (insert the hook under the far side of the loop of the previous row). Weave a cord from two bundles of threads of unequal colors, attach and sew its ends along the board into the seam of the finished product.
Lush turban crochet
A diagram and a description of the procedure for doing crochet work of a chic turban are presented. For work, you need a hook number 3. The size of the product for a head circumference is 64 cm.
During work, concave and curved columns are used - embossed purl and embossed front ones with a crochet: the concave (purl) column is knitted by grasping the thread for the back column from the bottom row when knitting, the curved (front) one - by grasping the front column from the bottom row. This knitting gives the elastic structure. In the description of the work, the following designations are used:
Work description:
Knitting a turban
There is a description of how to knit a turban with knitting needles. The scheme of work is simple. To do this, we need 120 g yarn under No. 3.03 / 2 in two layers, knitting needles under No. 4. The following abbreviations are adopted in the scheme:
- Facial loop - LPC.
- Purl loop - IZP.
- Loop - P.
Pattern for the product: 1x1 elastic band from removed short pieces. To knit a sample, you should dial an unpaired amount of P:
- 1st row - 1 LCP., 1 IZP. etc.
- 2nd and all paired rows - IZP. shoot, leaving the thread in front of P.-mi, LCP. continue to work on the drawing.
- 3rd row - we repeat the work from the 1st row.
The turban consists of two parts: a rim and a bottom. For the hem, dial 19 P. (= 10 cm) and knit a ribbon 58 rows long (= 28 cm). In the front row, the first 8 points must be removed, taking into account the extreme one, and left on the additional spoke behind the product. Next, knit the remaining P. according to the scheme, except for the last one, which must be removed on an additional knitting needle to the first half of the loops.
The first 2 points on the additional spoke are those that were edging. Knit them together IZP., The remaining P. according to the drawing. Before the last P., add 1 more P. - thus, the work is still 19 P. Having knitted another 58 rows (= 28 cm), close P., sew the ends of the hem. To make the seam invisible, you need to make it chunky. In this case, an additional thread will come in handy for starting and ending work.
For the bottom, dial 41 P. (= 23 cm) and knit 52 rows (= 25 cm). Thread the thread along the longitudinal direction of the short sides of the bottom and pull the fabric up to 10−12 cm. Pin the bottom to the hem so that the centers of the tightened sections of the bottom coincide with the seam and the movement of the loops on the hem. On the seamy side, crochet the bottom and the border.
Twisted Ribbon
In the spring, when it is no longer very cold, but it is still too early to walk without a hat, a light version of a turban will come in handy - a headdress in the form of a knitted ribbon. It is decorated with a knot in the middle, which makes it look like a turban.
To knit such a tape, you need to take 50 g of yarn (120m / 50g). Knitting needles straight 4 mm. Abbreviations are used similar to the previous scheme.
Twisted pattern
The density of knitting in a twisted pattern is 40 P. wide and 30 rows high form a square with a side of 10 cm. Drawing scheme:
- 1st row: 1 extreme P., 1 IZP., * 1 P. remove on an additional knitting needle at work, knit 1 LCP., Then 1 LCP. with extra spoke, 1 ISP. *. Repeat from asterisk to asterisk and move to the end of the row, finish 1 extreme P .;
- 2nd row: knit, as P.
The drawing is reproduced in the 1st 2nd row.
Work description
Cast on 12 P. and knit 4 rows of hosiery (LCP. On the face and IZP. On the wrong side of the work). Then proceed like this:
Assembling the product
Join the ribbon with a ring. Cast on 15 P. and knit about 11 cm twisted pattern, then close all P. Put this ribbon around our product in place of the seam and sew on the back side.
Open headdress with brooch
An experienced knitter will cope with this work in an hour, and for beginners this is a great opportunity to practice, and you will need only 30 to 80 g of thread of medium thickness. Knitting needles # 3.
We collect 50 loops with any thread, but not the one from which we are going to knit, and we knit 4-6 rows of hosiery. Now we add the main thread and, without changing the pattern, we knit the fabric in accordance with the size of the head circumference. We cut off the thread, add the one with which the loops were collected first, and we knit 4-6 rows.
Now we braid the extraneous thread and knit the open loops with a knitted stitch seam, forming a vicious circle. Roll the edges of the strip inward. We pull the strip with a knitted inlay, which we knit from threads of the same color. We decorate the inlay with a brooch, button, bow, beads - whatever you like.
Attention, only TODAY!
A turban hat or turban is a headdress that came to us from Eastern culture, and which has long since established itself in the global fashion industry. But in order not to spend a lot of money on a designer thing, you can effortlessly create a turban with your own hands, taking into account personal preferences and characteristics. Knitting needles, yarn and knitting patterns will help in this.
How to knit a turban hat with knitting needles - a diagram with a detailed description
You can knit such a headdress the most simple pattern, and a beautiful brooch can become a central decoration. The main advantage of a knitted turban hat is the fact that it is easy to put on and take off, because it does not need to be folded, unfolded and folded back every time.
A knitted turban hat with knitting needles can look different, but most of the models of this type of headdress are knitted quite quickly and relatively simply. The turban itself has several varieties:
- classic;
- eastern;
- retro.
Visually, they differ in the way the front part is wrapped and in the amount of folds, as well as in the presence of decorations. There is also a turban that covers the ears but leaves the crown of the head open. This option is best for fall, while a hat is a versatile item for fall, spring and winter.
Popular articles:
Despite the slight differences, there are some characteristic features in knitting a turban with knitting needles that are worth considering using knitting patterns as an example.
For example, some patterns suggest a method for knitting a hat from a rectangular cloth, while other options suggest knitting a rectangle with an end bifurcated from the middle, and still others use a fan-shaped method. It is also possible to create a turban from a ready-made knitted scarf.
Simple model for beginners
Beginner knitters have the opportunity to knit a beautiful oriental yarn product using simple patterns and descriptions.
- Option number 1
This turban hat for beginners is knitted in one piece. It will not then have to be connected or stitched, twisted and dealt with separately connected parts. This turban can be easily knitted thanks to step-by-step photographs.
Materials for work:
- semi-woolen yarn;
- knitting needles number 5.
We calculate the loops:
In width you should get 10-11 cm, in this master class it turned out 19 loops. Knit a pattern from your yarn, taking into account that the number of loops should be a multiple of six and +1.
Knitting an elastic band for a turban:
1st row: 1 out., 2 persons., Repeat to the end the alternation of loops.
2nd row and the rest are even we knit according to the picture.
3rd row: 1 out., 1 loop of persons. behind the back wall and without removing it, we will knit 1 loop of faces. behind the front. Thus, we repeat this method of knitting three loops to the end.
5th row as well as the third.
We knit an elastic band 4 cm.
In each front row, he makes five additions, in the manner described below.
Additions: in the 1st row after two front ones (5 increases), in the third front row - in front of the faces. And 1 out. (5 increments). We alternate options for increases. This will give an even expansion of our turban cap.
Important: so that no holes form in the canvas, it is better to make increments in front of the purl loops.
We make additions until there are 6 purl loops on the outer tracks.
On other tracks, stop adding when there are 11 out. loops. edge loops are not counted.
We knit 5-6 cm without increments. And then we begin to make decreases: in the front rows, knit 5 times, 2 purl loops each. In order to avoid skewing, we place the reductions in turn - first in front of the faces., Then after.
Decreases are made until we leave 1 out. loop on every track except the middle one. You need to leave 2 out on it. loops.
We divide the loops by 10 pieces. We knit separately each half of 28-29 cm. We arrange them crosswise and sew along the edges of the ends - rims.
Sew the ends. The turban hat is ready.
- Option number 2
Another option for knitting an oriental hat for beginner craftswomen. In this case, the product will be sewn from a rectangular strip. knitted fabric with the simplest pattern. The result is an interesting knitted turban with needles. The scheme will help to easily knit it to any beginner in knitting.
Materials for work:
- yarn - at the discretion, any will do;
- knitting needles - in accordance with the yarn;
- thread in the color of the yarn;
- needle.
Progress:
To knit a turban, you need to dial the loops on the knitting needles. Their number depends on the thickness of the yarn. We need the canvas to be twelve centimeters wide. Therefore, we collect loops and knit a couple of rows to measure the width of the knitting - that is, we knit a sample. We decide on the number of loops and type them on the knitting needles.
Now we will knit. We will always shoot the edging first in each new row. And we will knit the last in all rows of the purl. And thanks to the two edging loops, we get smooth edges. The pattern will be the simplest. We knit with an elastic band one by one. That is, we alternate the front, purl, front, purl, and so on.
We knit a scarf with an elastic band. This is the main and only canvas that we need for a turban. We knit eighty centimeters in length.
When the scarf is ready, you need to correctly assemble and sew a turban out of it. We put one side as if slightly obliquely.
Put the second side of our scarf on top. The result is an overlap. Now we fold the short parts of the scarf to the long part. And we sew the short parts to the long one. And also we sew a hole in the middle, which was formed from the addition of the short parts of the scarf.
We try on the turban to the head and determine how much to sew on the side so that the turban is in size. To make the turban fit well, you can try it on with every shovchik. For example, an overlap can be made on the head and mark the stitching areas. We should have four seams: horizontally in the middle, one vertically on the sides, and vertically in the middle too. A ready-made turban can be decorated with a brooch.
Fashionable headdress for women
Knitted turban hat is really very popular among those who follow fashion trends. Therefore, it will be doubly pleasant to do this with your own hands. Consider a simple knitting pattern for these stylish and sophisticated hats. In case of fashionable views turbans are important to consider the popular colors of the season, as well as the fashion for types of yarn. Consider how it fits stylish hat a turban knitted - the description will help with this.
Materials for work:
- yarn - (60% silk, 40% wool; 50 g / 175 m) - 1 skein curry;
- knitting needles number 3.5.
We knit an elastic band according to the scheme:
Alternately 3 persons., 1 N.
Progress:
Dial 31 sts and 1st p. knit as follows: 3 persons., * 1 out., 3 persons. *, from * to * repeat to the end of the row.
Next row: 1 persons., * 1 out., 3 persons. *, from * to * repeat to the end of the row.
These 2 p. repeat until the length of the strip is 102 cm.
Assembly
Fold the finished scarf in half, cross the ends on the head and throw one over the other. Pull the ends over the forehead, extending them over the crown to the back of the head.
Now you need to sew all the holes in the bandage.
Video tutorial
It will be easier for beginner knitters to master the technique of knitting a turban with knitting needles after watching detailed master class... This beautiful model hats will be a worthy example of how to quickly and easily learn how to knit a turban.
Video - knitted turban hat with knitting needles:
