Knitted children's mittens for girls. Fairy mittens for your little ones. Beautiful knitted mittens with a pattern

If you don't know how to knit, but want to learn, start with something simple. The easiest way is to knit a scarf, woolen socks or mittens on your own knitting needles.

Start now and in the winter these things will come in handy.
Since it got colder outside, I had to urgently knit mittens for my son. The principle of knitting, which is the same for a baby, which is the same for an adult, I propose to get to work.
To get started you will need:
Yarn
Hosiery needles No. 4

I used Semenov Chelsea yarn (50/50 wool/acrylic) 50 g/100 m.

Work description

We collect 24 loops (it is more convenient for me to dial loops on one knitting needle, someone is gaining on two).
We knit 11 rows in a circle with an elastic band 1x1, alternating the front and back loops. Immediately in the first row, evenly distribute knitting on four knitting needles. Thus, you should get 6 loops on each knitting needle.

Now we make a cut for thumb.
To do this, we knit one loop, and remove the remaining five loops on a pin.

With the help of a working thread, we collect the missing 5 loops on the right knitting needle.

We continue to knit in a circle with the front stitch for another 13 rows. Since all babies have different pens, attach the work to your child for accuracy. Accordingly, at this stage, the rows can be either more or less.

After that, you can reduce the loops.
Please note that each side mittens we have two spokes. Now in each row at the beginning of each 1st and at the end of each 2nd knitting needle we knit two loops together - 5 times. There will be five rows in total. We tighten the remaining loops, fasten the thread with wrong side products and cut.

It remains to finish the finger and the mitten is ready.
To do this, we collect the previously removed loops on the knitting needle, we collect 7 more loops along the free edge. I do this with a hook and a working thread. It doesn't always work out right away, but be patient.
Now 12 loops need to be divided into two knitting needles. If it is inconvenient for you to knit a finger like this, then you can spread the loops over three knitting needles (6-3-3). We knit 8 rows of facial and transfer knitting to two knitting needles. Next, 2 times we decrease 2 loops at the beginning and end of each knitting needle, just as we reduced the mitten itself. We tighten the remaining loops, fasten the thread and cut it off. The finished mitten turned out to be 14 centimeters. We knit the second mitten according to the same principle.

In winter frosts, it is especially important that the child's hands are warm. Therefore, you will surely need a master class, how to knit double mittens (with lining) prepared by Vera Ponomarenko. In addition, Vera turned out very beautiful and elegant, you can see them in the photo. The description of the work is designed for the age of the child: 3-4 years, but according to this principle, large mittens can also be knitted.

Double mittens (knitting)

Do you want to knit mittens for your child, but don't know how? The master class on knitting for children double mittens will help you find the answer to your question. Connect the imagination, and it's not just everyday life Everyday life in frosty weather, but also a great present for your favorite holidays. After all, we have been taught since childhood: “The best is made by hand!”

Yarn: Moscow LAMA "Russian motive" (100 g / 300 m, yarn content: 40% wool, 60% acrylic)
Marker: piece of contrasting thread - 12 cm
Needles: two sets of stocking needles 2.5 mm and 3 mm.

Description

To keep the mittens on the wrists and not slip down, which is especially important for children, knitting must begin with an elastic band. In this example, one of the popular options is used - 2 persons.p., 2 out.p. And so that the product does not lose its marketable appearance during subsequent wear, the elastic band should be knitted with smaller knitting needles than the knitting of the main part is supposed to be.

On stocking needles with a diameter of 2.5 mm, dial 40 sts. Evenly distribute 10 sts on each of the four knitting needles and knit an elastic band 2x2 for the next 50 rows. As the product begins to add row after row, it may seem that on the 20th row it would be time to stop and move on to knitting the palm and thumb. But since the presented sample of mittens is double (with a lining), such a number of centimeters of gum will fold in half.

So, after 50 rows, it was the turn of the front surface. At the same time, it is necessary to replace the needles with a 3 mm diameter. Continue knitting for 8 more rows. In the 9th, the thumb will begin.

The ways of knitting the thumb of the mitten are varied. This master class describes the simplest of them. To do this, knit 4 facial loops on the I-th knitting needle, insert a thread of a different color (marker) and knit the remaining 6 facial loops on the knitting needle.

Return to the main color yarn, finish the current row with facial ones, plus another 28 circular rows (total - 37 p. from the gum).

In the next row, i.e. 38th, starting from the 1st needle, start decreasing along the edges. At the same time, on the 1st and 3rd knitting needles, transfer the penultimate loop to the right knitting needle. Knit the last loop and pull it through the removed one (i.e. 2 p. Together with a slope to the right). But on the 2nd and 4th spokes, the slope should be to the left, i.e. Knit the first loop and pull through the second. Thus, decrease until there are two loops left on the knitting needles (total: 8 p.). Cut the thread at a distance of 5 cm and tighten the remaining loops. The left piece of yarn will be needed later to fasten the outer and inner mittens together.

Return to marker. Using a knitting needle, pull the thread out of the fabric. Cast on dropped stitches on knitting needles. Total: 6 sts at the bottom and 7 sts at the top. On the bottom row, pick up one more side loop on each side. They must be knitted in the first row crossed to avoid the appearance of holes in the canvas. In total, the thumb is knitted on 15 loops for the next 17 rows.

More interesting:

Knitted mittens. Descriptions from our website

Knitted mittens with star pattern

Traditional "Norwegian stars" will decorate soft mittens. You will need: 50 g each of Permin Qual Navia Trio white and light gray yarn (100% wool, 120 m / 50 g); a set of stocking knitting needles No. 3 and No. 3.5.

How to knit mittens with knitting needles with a complex pattern

To knit mittens with knitting needles, you will need: 2 skeins of 100 g each (each approx. 126 m long) of straw-colored yarn; a set of stocking needles number 8 (5 mm) or a diameter that will allow you to knit a sample; auxiliary needle for knitting braids.

In addition to magazine works, readers send us a lot of beautiful knitted mittens.

We knit mittens with knitting needles with our readers

Openwork mittens knitting

Light openwork snow-white is perfect for winter with moderate cold (up to -15). Ellen's work. Thanks to the interweaving of a shiny thread, the mittens remind of the brilliance of freshly fallen snow in the bright sun, and the presence of wool (20%) in the yarn will not allow fashionistas to freeze even in a fifteen-degree frost.

Knitted mittens with owls

These mittens were knitted by Tatyana with knitting needles from Camtex yarn (Argentinean wool).

Knitted mittens with jacquard patterns - works by Marina Temerova

Always make a pattern before knitting. This will help you correctly calculate the required number of loops.

Knitted mittens. Master class from Olga

Yarn “Bebe Batik”. Acrylic 100%, knitting needles No. 2.5. We collect 48 loops, distribute them on 4 knitting needles, 12 loops on each. We knit with an elastic band 1X1 30 rows. Then we knit 4 circular rows with the front surface.

Jacquard mittens knitting. Love's Work

Jacquard mittens. Composition-wool, semi-wool. On average woman's hand, medium thickness. Wash by hand in warm water.

Mittens Bullfinches. The work of Lyubov Afanasyeva

Mittens "Bullfinches" with pom-poms. Associated with the addition of downy thread. The mitten itself is knitted. The application "Bullfinch" is crocheted and made voluminous. Details are firmly sewn on. Perfect for an exclusive gift.

Mittens spokes Patriotic. Love's Work

Mittens “Patriotic”. For a long time I wanted to knit men's mittens with an ornament, I found a suitable scheme, and then I safely forgot about it in the hustle and bustle of affairs. Well, she recently caught my eye again, so it went. Good for a gift for "February 23". Although, some women themselves also want these.

Children's mittens Cheerful sheep

Knitting mittens from your fingertips is a great way to get a neat rounded blunt top of the mittens.

This method is distinguished by a peculiar set of loops, which is also used for knitting socks from the fingertips. For a set of loops, you need 2 knitting needles, which you hold in parallel in right hand. Make the initial loop, leaving a small end of the thread for the cast-on and put it on the second knitting needle from you. Place the ends of the threads in your left hand as with a classic set of loops.

Knitted mittens with an openwork pattern

Mittens knitted from goat down and angora.

Knitted mittens with owls. Author Lyubov Afanasyeva

Mittens with "Owls". Mittens are knitted from Troitsk yarn “Simple” (wool mixture-200m/100g) white color in one addition - the main background.

Knitting mittens - interesting models from the Internet

Mittens "Cranberry" from Nosova Tatyana

Merino yarn 50% merino wool, 50% acrylic, 200m/100g, consumption less than 100g, knitting needles No. 2.5

Mittens with Magic Mirror needles (designer Kristel Nyberg)

Mittens transformers knitting Vasama

Fashionable model of women's mittens with a free description of knitting beautiful pattern. But that's not all, they can easily be transformed into mittens to open fingers and easily send sms from a mobile phone, which is convenient for young people, and not only for young people.

Beautiful knitted mittens with a jacquard pattern

Designer: Adrian Bizilia

Mittens are knitted from bottom to top. First, the outer part is knitted, then loops are raised along the inner side of the dur-cord and the lining is made.

Both mittens are the same, that is, there is no left and right, which means they can be worn longer.

Knitting mittens

For those who crochet, we suggest going through where you will find several models crochet mittens.

Knitting mittens video

How to knit mittens with owl knitting needles

double knitting mittens

Mittens are knitted for a girl of 5 years. Used yarn Pekhorka Children's novelty, knitting needles No. 3.

The video should load here, please wait or refresh the page.

Knitted mittens with a pattern

Mittens are knitted from 100% Merino yarn, 50 g / 125 m, Italy, with stocking needles No. 3.5.

The video should load here, please wait or refresh the page.

It is worth saying that knitting mittens for children is a great pleasure, because this thing is always in sight, and it is nice to knit something warm for the baby. Choose bright threads for mittens, with a minimum amount of fluff so that the fluff does not remain on the baby's palms. The thickness of the thread can be very different - both excessively dense and less dense. The most important thing is that the mitten is warm. In the meantime, mom is knitting, the child can be occupied

We knit warm mittens

So, how to knit mittens for children? What do we need for this?

We will need:

hook
five spokes
two skeins of colored yarn
scissors
a needle threaded with a neutral thread

knitting process

1. To start knitting mittens for children - we will need to take measurements from the hand of the little one - this is done in order to determine the size of knitting. We take a centimeter in our hands and measure the length from the thumb of the crumbs to the tip of his little finger, and you also need to measure the length from the base of the peanut's hand to the base of his thumb.

2. So, we will knit mittens for children with knitting needles. Where to start? First you need to tie the elastic bands on the cuffs. For a two-year-old peanut, forty loops should be cast on the knitting needles. After that, we need to divide our forty loops into four knitting needles - that is, there should be ten loops on each knitting needle.

3. Now we need to connect all the knitting needles with the existing loops into a circle. Take a free loop, and using it, knit one front loop - this way you will connect the first and last of your knitting needles.

4. And what should be done next to knit mittens for a child, knitted with knitting needles? We need to tie an elastic band. The scheme will be as follows: four by two. That is, at first we knit four facial loops, and then two purl loops. In the same way, you need to repeat the pattern to the last loop in a circle. Sometimes it happens that the pattern at the end of the row on the last needle does not converge. This is an insignificant point - the pattern will not spoil it.

5. We continue to knit mittens for kids with knitting needles. It is worth saying that, given the size of the peanut's hand, you can experiment with the length of the elastic band. However, if the elastic is long enough, then it will fit much closer to the peanut's brush. Yes, and putting on such mittens for a baby will be easier, since the elastic band will be wide.

6. Now we need to knit the main pattern. The main pattern is knitted from facial loops. It is necessary to knit facial loops until the length of the pattern reaches the level of the base of the baby's thumb. Now we need to make a hole into which the thumb will stick through.

7.
Two facial loops should be knitted, and after that, a thread of a contrasting shade should be strung on the next seven loops. After that, knit the remaining loops with facial ones - and so on until the end of the row. When you reach the loops with a contrasting thread, you will need to turn the knitting over and knit the front loops again in the opposite direction. The same steps should be repeated again. We should get a little lift.

8. After that, we need to dial seven loops on the same knitting needle. Using free knitting needle, we need to attach these loops to our main knitting. After that, the front loops should be knitted in a circle without any changes. There should be a hole. It is necessary to knit a pattern until the length of our knitting reaches the tip of the little finger of the baby.

9. Our next task is to reduce the loops. This is done so that the edges of our mittens are neat - for this, the edges should be reduced exclusively along the opposite edges and knitted into a “pigtail”. We think that after you master the technique of knitting mittens for your child, it will not be difficult for you at all.

Knitting "pigtails"

How to tie this "pigtail"? We need to knit the first two sts together on the first needle on the inside of the children's mittens (where the finger hole is located). Do the same with the last two stitches on the second needle. Similar actions should be performed on the back of the mittens. We should knit until only one or two loops remain on the knitting needles. Now take the hook and pull the thread through all our loops, then tighten it tightly, and very carefully hide the tip of the thread inside our mittens.

Now we need to tie the thumb. For this purpose, you need to take a knitting needle and string seven loops on it. You also need to take one loop located at the corners of the holes - so that there are no holes. The upper side of the mitten has no loops - that is, they can be strung in any order. The finger is knitted in the same way as the main part of the mittens.

Mittens for walking may be needed by a child almost from birth, and even more so if you are already a year old. For beginner needlewomen, making mittens seems an impossible task. It is very difficult to cope with five knitting needles at once. But do not despair, because knitted mittens on two knitting needles will look no less attractive. If you use simple diagrams, this task will be simple and easy to perform. Time same work will take the least. And the complexity of knitting is approximately the same for a one-year-old baby, and for a girl or boy who is already 2, 5, or even 7 years old. Mittens can be single or double.

For beginner needlewomen, making mittens seems an impossible task.

Clothing, hats and even mittens knitted for children should be bright, unusual, and attractive. Special attention. Accordingly, they need to be additionally decorated, thereby giving a fabulous look.

Decor elements in this case can be:

beads;
rhinestones;
beads;
buttons;
yarn;
ribbons.

With the help of beads, for example, you can embroider flowers or a very original ornament, and using yarn, decorate mittens with figures of your favorite cartoon characters. It is enough just to find a knitting pattern for them to create such beauty.

Ties, on the tips of which fur flaunts, give the product a more delicate look. Even ribbons can add incredible grace to children's winter accessories. There are no restrictions on this. The fantasy of the needlewoman herself will tell you exactly how this product should look.

Children's mittens on two knitting needles quickly and easily (video)

How to knit mittens on two knitting needles for a baby: a master class with a description

Incredibly easy to knit mittens with just two knitting needles. That is why this method attracts attention. In winter, these gloves will be indispensable. They will help to warm the baby's hands even in severe frosts.

We knit according to the scheme:

42 loops are cast on and fifteen rows are knitted with an elastic band, alternating purl with facial.
Then fourteen rows are knitted with front stitch.
In the last of the lines, the last nine stitches are no longer tied with the main thread, but with an additional one.
These nine stitches are transferred to the left needle and immediately knitted with the main thread.
Knitting continues for eight more lines with front stitch.
After that, three loops are reduced through the row.
Then the decrease must be continued in accordance with the resulting pattern.
After reaching the desired height, the product is sewn with a knitted seam.
The auxiliary thread is removed, and the loops that are released as a result are typed on the knitting needle.
A pair of loops is cast on at the fold.
Fourteen rows are knitted, while in each of them the fourth loop is reduced.
The six remaining stitches are sewn together.

Incredibly easy to knit mittens with just two knitting needles

The resulting finger is sewn together.

Mittens on circular knitting needles for children: instructions

Making mittens on circular needles is a very quick and easy process. Even a very young needlewoman will be able to knit them literally in a day. They are not only warm, but also very beautiful.

What is necessary:

yarn of two colors;
circular knitting needles;
needle;
4 toe knitting needles.

Making mittens on circular needles is a very quick and easy process.

Progress:

32 loops are cast on and closed in a circle.
In a circle, alternating purl and facial, seventeen rows are knitted.
After that, one line is knitted only with facial ones.
In the next row, an additional five loops are typed.
Yarn of a different color is taken. She knits only three rows.
After that, the colors alternate every three lines.
Thus, fourteen rows are knitted.
22 stitches are knitted from the back.
An additional thread is taken and only seven loops are knitted on it, which are then again thrown onto the working knitting needle and knitted with the main thread.
Another 29 lines are knitted with the front surface, after which the reduction of stitches begins.
When only eight loops remain on the needle, the thread breaks and the loops are pulled together.
The auxiliary thread is removed, and the loops are transferred to the toe knitting needles.
From the edge of each cut, an additional stitch is typed.
14 lines are knitted in a circle, after which the stitches are reduced in each row.
When only four stitches remain, they are pulled together.

The second mitten is knitted in the same way, only in a mirror image.

Mittens on two knitting needles for a child of four years

The method of skew knitting, which is used in this case, helps to make children's mittens as quickly as possible. This method is especially good for beginner knitters.

Progress:

19 loops are collected, which are knitted according to the scheme: one stitch is added on the sides, and the pair is reduced in the center.
Thus, it is knitted until the length of the product is from the toe to the wrist.
Then the open stitches are transferred to the auxiliary thread.
The lower part is knitted in the same way to the place where the thumb should be located.
The finger is tied. For this, only five stitches are used and one auxiliary stitch is typed on the sides.
When the length of the finger reaches six centimeters, the loops on the sides decrease, forming a toe.
Knitting continues in reverse order, adding loops on the sides until there are seven loops on the needle.
The height of the bottom should be exactly the same as the top.
After that, all open loops are put on the knitting needles and both halves are knitted together with a regular elastic band.

This method is especially good for beginner knitters.

The loops are closed and the product is sewn.

Despite the fact that knitting mittens on two knitting needles is considered the easiest, in this case, certain recommendations should be followed:

the front side is knitted with a pattern, and the inner side is plain;
to make the product very warm, it is better to use woolen or downy threads;
in the case of using downy yarn, when knitting a palm, a synthetic thread is additionally used;
when knitting, it is better to use a pattern for which all measurements are taken;
it is imperative to leave an incision for the thumb on the inside;
the finished product must be ironed.

Circular knitting needles: how to make a pattern correctly

Mittens can be easily knitted on circular needles. At the same time, it is not at all necessary to be limited only to such knitting methods as facial surface and gum. For such products, complex patterns can also be used. The main thing is to follow certain rules:

with circular knitting, all purl rows indicated in the diagram are knitted “vice versa”. If the wrong side is indicated in the diagram, then you need to knit the front one in this case. Accordingly, instead of the front, the wrong side is made;
when using those schemes in which even rows are knitted according to the pattern, each odd line is simply repeated;
in the event that it is necessary to shift knitting from two sides, then odd lines are made according to the pattern for two knitting needles;
all even lines are read from right to left, but loops are knitted opposite to those indicated.

We knit stylish mittens on two knitting needles in a circle: braids with a shadow (video)

Even without special knitting skills, you can independently knit beautiful and very warm mittens for your child. When performing the first job, you should not resort to the use complex ornaments. After all, a girl can then simply decorate such mittens with beads or beads. In any case, they will look amazing, as they are made by hand.