Evgeniya Smirnova

To send light into the depths of the human heart is the artist's purpose

Content

How to make a ball out of thread, many of us know from school lessons in labor training in elementary grades. With this thread ball you can decorate any room, bringing a touch of originality and warmth to it. In addition, a self-made and unusually decorated thread ball can become great gift your family and friends. That is why your favorite site useful tips the site will tell you how to make a ball of threads with your own hands.

So, to make an original thread ball, you will need:

  • threads - give preference to natural ones, for example, cotton or viscose, which absorb glue well;
  • a thick long needle, which is also called a gypsy needle;
  • a jar of PVA glue;
  • balloons;
  • wipes for wiping off excess glue.

Step-by-step instruction:

Inflate the balloons first. Inflate them in the size you want to get your string balls in the future. You can make balls of different sizes, depending on how you plan to decorate them in the future.

Thread the thread through the needle. Use a needle and thread to pierce the tube of glue. The thread, passing through the glue, will be impregnated with it. Now you can remove the needle, we will no longer need it.

Each balloon should now be wrapped with a thread impregnated with PVA glue. Try to keep it snug against the surface of the ball. Wrap tight, use more thread, don't skimp. When you wind the last layers of the thread, beads can be rolled into the thread, already at the exit from the jar of glue, which will add originality to your ball. But leave this step to your own discretion.

After all the threads are wound on all the balls, the most difficult thing remains - wait until the glue dries. It is best to make such blanks of balls in the evening, then you can go to bed with peace of mind, and in the morning the blanks of balls will have time to dry completely, and you can proceed to the next step of the instruction.

Use a needle to burst the balloons, and carefully remove their remains through the hole of the thread ball. If you want to use the balloon again, simply untie the thread that was holding the inflatable hole, deflate, and carefully remove the deflated balloon. The gossamer balls are ready. Now you can decorate them to your taste and decorate your room with them.

In order for your child to be in high spirits at a solemn event for him, and the experienced emotions and impressions remain in memory for many years, it is necessary to properly organize the holiday. The best option in such a situation, decoration with balloons or the manufacture of a surprise balloon will become.

In fact, a surprise ball is familiar to all of us balloon big size, inside which smaller balls are placed. The latter act as a surprise.

In addition to small balls, any other material is suitable for filling - rose petals, tinsel, multi-colored confetti, beautifully designed predictions or wishes in a comic form, for the writing of which paper is used of various kinds(hearts, stars, circles, etc.) and colors.

As a rule, a surprise ball is fixed under the ceiling, and at the end of a competition or dance it is burst. After that, its contents are beautifully and smoothly showered on the guests.

How to make a surprise balloon yourself?

You will need one main ball of a large size (the main thing is not to be surprised when buying, it has a specific color that resembles ordinary fingertips). In specialized stores, it is called a surprise ball. You also need to purchase small colored balls, about 15-20 pieces. You can choose any color, at your discretion.

If you are confident that you can inflate all the balloons yourself, there is no need to purchase a hand pump. Despite this, it is worth noting that it is quite problematic to inflate small balls, which is why it is best not to refuse to use the pump.

It is quite simple and quick to make one surprise balloon at home. If there is a larger event, several of these balls will be required.

First action.

It is necessary to inflate the main balloon a little and leave it in this state for a few minutes. As a result, the ball will stretch, acquire the necessary elasticity, and it will be possible to identify defects (if any). In the future, this will facilitate all the work. After this time has elapsed, the ball is deflated and you can proceed to the next action.

Second action.

Taking a small ball in your hands, you need to put it on the pump and push it into the neck of the main ball. Then a small colored balloon is inflated. In the process, you should hold it with your hand so that it does not slip into the depths of the main ball.

Third action.

The colored ball is tied and pushed inside the base of the surprise ball.

Fourth act.

We do all the same manipulations as in the second action. Now there are two small ones inside the big ball.

Fifth action.

With the third ball and the following, the task becomes a little more difficult. The large balloon fills up gradually and therefore needs to be inflated a little. First, insert a small ball and hold it with your hand. The most common way works best and you have to use your lungs. It is not very convenient to use the pump in such a situation, since it is difficult to press and fix the neck big ball... Inflate the large balloon a little, gently intercept the neck of the small one and inflate it with a pump.

Sixth act.

A small colored ball is tied. It is worth noting that while the small ball is at the neck of the large one, the latter is not deflated, since the air outlet is blocked.

The seventh act.

All other small colored balls are inflated in the same way as described in the fifth step. The main thing is not to forget to periodically blow up a large ball. After immersing all the small balls inside, the main surprise balloon is inflated to the end and securely tied with a decorative ribbon, ribbon, bows or whatever.

You can make a surprise balloon with your own hands in several versions. It can be a transparent balloon or matte. In the latter case, the addressees of the gifts will not know about their presence until the moment when the balloon bursts.

Each small ball can be pre-placed with small personalized gifts... Children will surely get carried away with the idea of ​​finding exactly their own ball.

Simply put, there are quite a few options for filling the surprise ball. The main thing is to turn on your imagination in time.

Put on a real show at the party? Just to surprise everyone present at the celebration and its culprit? All this can be organized by preparing a surprise balloon for the event. Most often it is ordered or bought ready-made, but it will be especially pleasant to make one with your own hands.

Filling

When Michael Faraday invented the first rubber balloon for his experiments with hydrogen in 1824, hardly anyone imagined that they would soon be mass-produced and sold as children's toys. Of course, the balls that the market offered in the 19th century are just distant relatives of the current indispensable attributes of the holidays.

What the entertainment industry offers now cannot be compared with what people used for special events 20-30 years ago. In particular, surprise balloons are gaining popularity. What it is? This is a large balloon filled with:

  • confetti,
  • serpentine,
  • notes with wishes,
  • money (paper),
  • flower petals,
  • small toys, etc.

Confetti, petals, streamer, etc. you can just fall asleep in a surprise ball. But if it is necessary that the object does not get lost (for example, a decoration), then it is first put into one of the small balloons, and only then into the one that will be given.

Manufacturing technology

By choosing the "filling" for unusual surprise for a holiday, you need to think about how to place it there, how to make a surprise balloon yourself? There are 2 ways:


The first filling method is suitable not only for small balloons, but also for small ones. soft toys... And the second is for everything else, i.e. for confetti, notes, money, petals, etc.

By the way, you can pleasantly surprise the hero of the occasion and even give a gift in another way. This is done using a box with balloons, and the surprise will be that they will fly out of it when the birthday boy opens the lid. To do this, you need a fairly large box that can hold several balloons filled with helium. A gift is simply tied to them (of course, it should be small), which will rise up along with the "filler" of the box.

What happened next?

Of course, a spherical surprise with a pleasant "filling" can simply be handed to the hero of the occasion, but there is much more spectacular way surprise him.


Such a show is usually staged at the end of the holiday as an alternative to fireworks. The sphere prepared for invocation is best attached to the ceiling or wall, but if something is not very heavy inside, then it is possible to attach it to the furniture. And, in order to avoid trouble, you should still warn the audience that a loud surprise awaits them.

There are many different technologies to decorate the desired space for a festive event. But decoration with balls gives more freedom of embodiment. design solutions, creating all kinds of decorative elements. In addition, decorating a birthday, wedding events with their help, gives others a whole lot of positive emotions.


You can buy balls in a wide variety of color palette, transparency, different sizes and forms. Buy ready-made or do it yourself, interesting compositions or figures. Inflating the balloons on your own, a natural question arises - how and how best to do this, how to tie balloons beautifully and correctly for different compositions.

How can you tie the balls?

There are two ways to tie balloons:

  • using a thread;
  • without thread.

In the first case, before tying the tip of the ball, you need a thread about 20 cm long (a longer piece of thread is taken for hanging). Further:

  1. The balloon is inflated, leaving a sufficient tail.
  2. One hand squeezes the body of the “bubble” near the base.
  3. It is twisted several times (from 3 to 5 turns around the axis).
  4. The base is wrapped with thread (about 5 turns), carefully, without damaging the rubber.
  5. The knot is tightened.

The second method allows you to quickly tie the ball into a tight knot and save time. For this you need:

How to inflate the balloon correctly?

When inflating a "bubble", you need to follow a few simple rules:

It is worth inflating so that the shape resembles a drop.
Do not over-breathe too tight - it will burst, ruining the holiday, it can scare the child.
Leave enough long tail required for comfortable tying.

If inflated correctly, the color of the finished balloon should be paler than the non-inflated one.

Blow by mouth a large number of balls, a rather unpleasant process.

For this it is better to use:

The workpiece is put on the pump tube (cylinder). Apply air (gas) and inflate the balloon. The main thing is to observe the tightness and make sure that it comes off the hose.

Another easy way to fill a balloon with air at home:

Composition of balls

To create a composition you will need:

  • special balls, which are sold in packs of 100 (available in sizes 5; 9; 12 inches);
  • decorative paper ribbons, fishing line.

The compositions use balls tied simple knot without using threads. To tie them, attach the "bubbles" to each other. Tie the balloons together as shown in the pictures:

When creating compositions for children, you can use so-called "sausage balls" for modeling. They will help to make not only simple round decorations, but also add various figures to them.

Basic shapes from balls

The main shapes that you need to be able to do include:

Deuce. Two balls are connected to each other. It turns out an eight, held together by the tips (double knot).

Four. It is performed by twisting two twos. The result is a cross-like shape.

Having learned how to knit basic shapes, they begin to make various designs. By stringing latex air "fours" on a rope (fishing line), you can form simple or multi-colored garlands of balloons.

A garland of balls

Create more complex compositions.

Composition "Heart"

And by adding a small ball of a different color in the center of the four, get a simple flower.

Simple balloon flower

How to make a flower from round balls

To make a flower you will need:

  • 4-5 round, one-color balls (they will go to the petals);
  • Balls of a different color and smaller for the middle.

Flower formation process:

  1. The petals are inflated to the same size;
  2. Two "twos" are connected (if there are 5 petals, the third "bubble" is attached to one of them);
  3. Link together;
  4. In the middle, threading the tail, the center (small ball) is inserted.

This is how it looks in the video:

The finished flower can be tied to a ribbon or planted on a leg of long "sausages":

Such simple, multi-colored decorations will be relevant for any holiday. And with a bouquet made of them, you can please a loved one.

How to tie balloons?

There are several ways to connect balls:

Ponytails, no thread needed. The ends must be twisted. Knit in pairs, using a double knot.

With decorative ribbons. Each large ball is tied to a separate ribbon. Then the ribbons are tied to form a "bouquet".

Fastening to a fishing line (string, frame). In turn, each of the balls is attached to the string at an equal distance (tied with tails).

Using a wire, tying balls already tied in advance.

Handle the wire very carefully to avoid damaging the latex.

Simple ball rolling technique

It is necessary to make figures from special balls (SHDM with a size of 260). For these purposes, you need to master simple techniques twisting:

1) Simple. The ball is twisted several times, creating separate compartments.

2) With a lock. Long balloon twists 4 times in a simple way... The two middle compartments are twisted three times, having previously removed them from the extreme bubbles.

3) With an inflection. The ball folded in half is twisted at the ends. This makes three compartments. One with a loop and one on each end.

Having mastered these techniques, you can start making different funny figures.

Classic balloon dog

The dog is one of the simplest figures. It is done as follows:

On classic model you can experiment. Make a longer torso and shorter legs. There will be similarities with a dachshund. Changing the muzzle, tied in a different way, the tail - gives the resemblance to a poodle.

How to make a poodle dog from a balloon is shown in the video tutorial:

It took only one ball to make, and the use of the same classic twisting techniques. Thus, by connecting imagination, you can make dogs of various shapes and breeds. Including various fairy-tale characters.

Now it is very fashionable to decorate holiday celebrations with a variety of crafts. However, most people use a surprise balloon for this occasion. It is worth noting that a surprise balloon is not only an amazingly beautiful decoration. It turns out that such a craft can bring a lot of positive emotions to everyone. If you look at such a ball, you will notice that this product looks like a simple and large ball, which has many small balls inside. In addition to balls, the inner space of such a ball is filled with:

  • candy,
  • money,
  • rose petals.

It all depends on your imagination.

During the holiday, such a ball bursts and all the contents are very beautifully scattered throughout the hall. And if you want to do original decoration for your holiday, then we invite you to learn how to make a surprise balloon. In this article, we will try to fully answer this question.

How to make a surprise balloon with your own hands

In order to make a surprise balloon with your own hands, you need to work hard. For such a craft, you must prepare:

  • large ball;
  • a large number of small balls,
  • battery krone,
  • fuse,
  • conductor for small balls.

In general, everything you need for this case is shown in the image. Below we describe the process of creating such a craft.

Progress:

So, first of all, you have to inflate all the little balloons that you have. And in order for the balls to be of equal size, then you should use a calibrator during inflation. It is worth cutting off all the tails of such balls. This must be done in order for the balls to fall better. In addition, they will look prettier. And for the guide it is worth taking plastic bottle to be trimmed on both sides.


In order for the large balloon to become elastic, you need to inflate it several times. Then it is worth pulling on the conductor. Next, use a vacuum cleaner to inflate it by 70%.


A large ball should be plugged with a small ball. It is worth doing this so that the air does not come out of it. After that, you should start pushing small balls into a large ball. This should be done quickly so that the ball does not deflate.


If you have filled the ball, then it is worth deflating and removing the conductor from it. At this stage, you can add candy to the ball, for example.



Your ball should now be back to its normal size. And for this purpose it is worth taking a pump and inflating it. At the end of the work, the ball should be tied.

If we talk about decorating the ball, then you can decorate it with bows or ribbons.

That's all such a surprise balloon made of balloons and candy is ready. As you can see, it will take time to make such a ball. However, the result will surely please you. Hopefully how to make a surprise balloon out of balloons.

How to burst such a surprise balloon

Above, we were able to describe how to make a surprise balloon with our own hands. And if something seems incomprehensible to you, then you should watch the video.

So, you know how to make a surprise balloon, but now it's worth reporting how this balloon should burst. So, you can burst such a ball with a stick. You can also use a fuse for this purpose, which can be bought at any store. But in order for it to work, it is worth using voltage. And this voltage can be used from a battery.