Calculation of knitting a deer on a sweater. Men's sweater with deer: create a fashionable winter look for your loved one. This mysterious word “Jacquard”

Sweaters are an integral attribute of the wardrobe, both men's and women's. Men's sweater Recently it has become popular if it is made with deer. Knitting go is quite difficult - the technique in which the product is made is called jacquard. Knitting is done in several threads, it is important to follow the pattern, otherwise the pattern will not work.

We knit a men's sweater with deer: jacquard pattern

Jacquard is a knitting technique in which the pattern is repeated several times in the product. The work is carried out from the front side with threads of different colors; unused threads are hidden inside the loop or pulled along the wrong side. Traditional products using the “fairy” technique are knitted in the round so that you don’t have to knit purl rows. Such items are knitted entirely up to the armhole, then cut.

It is customary to use no more than 2 colors in one row, and the number of colors in a product is not limited.

To knit a jacquard pattern, patterns are used that clearly depict the pattern. To understand the schemes there is symbols. If there are no special marks, it is generally accepted that the pattern is knitted in stockinette stitch, and the purl row is knitted purl according to the pattern.

Crochet embroidery patterns are often used for knitting. This is convenient because the pattern is already divided into separate cells (loops), the colors used are indicated, and the loops are counted.

Sweater with deer.

The most popular jacquard pattern is deer and snowflakes. The pattern of deer may be different, but in any case it is worth making sure that the legs and antlers of the animals are connected exactly according to the pattern. Otherwise, the deer will look ugly.

To knit a men's pullover, first of all, measurements are taken and a pattern is made. If the knitting is based on the raglan principle - from the neck with expansion to the sleeves, then it is worth considering that when knitting the pattern must be turned over and knitted from top to bottom. Otherwise, the ornament will be upside down and the deer will walk on its antlers.

Materials and highlights.

To knit a men's sweater for sizes 48/50(52) you need 550 (600) g. black and 100 (150) gr. white yarn (for example, Dasolo - 87% merino wool, 13% polyamide).

The elastic is knitted: classic English - 1 knit, 1 purl.

The front stitch is knitted: front row - front loops, purl row - purl loops.

Jacquard pattern: knitted in stockinette stitch according to the pattern, the non-working thread is pulled freely from wrong side work. It is important to remember that there is only one wrong side, all broaches should be on one side only. Uniform tension of the broaches guarantees an even fabric; if the broaches are pulled differently, the fabric may bunch up in folds.

There are specific decreases in the work: on the right side - edge, knit 2 loops together with the front one; on the left side - 1 broach (slip 1 loop as a knit stitch, 1 knit stitch and pull it through the removed loop), edge stitch.

Estimated knitting density in stockinette stitch: 11 stitches and 15 rows = 10cm x 10cm.

Knitting parts.

Front of the sweater: cast on 67 (71) loops with black thread, knit 7 cm with an elastic band. Then knit in stockinette stitch. At a height of 37 (39) cm, knitting of the jacquard pattern begins from arrow A (B). At a height of 39 (41) cm, close 3 (5) loops for raglan bevels on both sides and then decrease with special decreases (indicated in the description) in each 2nd row of 20 x 1 loops. After finishing knitting the jacquard pattern, continue knitting faces. satin stitch with black thread. At a height of 62 (64) cm, close the middle 9 loops for the neckline. For rounding, close 3 x 2 loops in every 2nd row.

Back: knitted in the same way, but without a neckline. At a height of 65 (67) cm, the remaining loops are laid.

Sleeves: cast on 35 stitches with black thread and knit 9 cm with an elastic band. Then with stockinette stitch. At a height of 14 cm, add 12 x 1 loops for bevels on both sides in every 4th row (8 x 1 loops in every 4th row and 5 x 1 loops in every 2nd row). At a height of 44 cm, a jacquard pattern is made, distributing it from the middle. Only the middle tree without deer is knitted. At a height of 46 cm, 3 (5) loops are closed for raglan bevels on both sides. Then decrease with special decreases in every 2nd row of 20 x 1 loops. After finishing the jacquard pattern, continue to knit in stockinette stitch with black thread.

At a height of 72 cm, the remaining loops are laid.

Assembly: seams are performed; Along the neckline, cast on 60 loops with black thread, knit 28-30 cm with an elastic band and then close the loops.

The result is an interesting men's sweater that looks very advantageous in red. Red is knitted exactly the same way, only instead of the main black thread, a red thread is used.

Knitting such things requires some skill. Better understand the implementation features jacquard patterns A selection of videos on the topic of the article will help.

Video on the topic of the article

Warm, stylish, smile-inducing. Wear it either to the skating rink or on a date. And as work clothes it is comfortable and practical. Here it is, a men's sweater with deer.

Homeland of the reindeer team

The reindeer came from Norway, a country where techniques such as embroidery, weaving, lace weaving, and knitting were widespread. Knitting motifs were represented by geometric elements, plant and animal patterns. Knitted items were most often presented in warm colors; sweaters were made from untreated sheep wool, so they came in a variety of beige shades. The fact that they were warm and comfortable to wear made them a favorite among sailors. Each knitter had her own distinctive patterns, and the fact that knitting patterns were never written down meant that each piece was unique.

Something for everyone

At the beginning of the 20th century, such sweaters were worn at ski resorts, and in the 1950s. they became even more popular thanks to the film “Sun Valley Serenade”. Soon the fair sex also adopted them. Then children's models appeared.

And now this pattern is quite often found in thematic collections of fashionable clothing.

You will learn how to knit such a sweater in the master class.

This mysterious word “Jacquard”

Initially, it is a smooth fabric, on the surface of which the contour pattern is repeated many times. The method of creating a pattern is weaving on a special machine. The fabric got its name from the name of its creator, weaver Joseph Jaccard.

The same principle is used for jacquard knitting. The design is created by weaving threads of different colors. Initially it was an alternation: red, gray or black and white. The pattern is knitted in stockinette stitch on knitting needles, and in different loops(purl, knit) different colors of yarn are used. Due to this interweaving front side the ornament is knitted on the wrong side, depending on the technique - broaching the thread or a version without broaches.

There is also a multi-color option, when more than 2 colors are used in knitting, it is more complex in execution.

The simplest is considered to be the so-called lazy jacquard, when the alternation of threads does not occur according to a pattern, but from row to row.

Arrange the drawing

When knitting a sweater, choose which pattern you find most attractive. As a rule, craftswomen choose the following options:

knitted patterns alternate across the entire area;

The sweater features a single deer stripe framed by other patterns;

deer walk one after the other or two deer run towards each other;

On the sweater, one deer is made large and in sufficient detail.

By following them, you will get excellent results and avoid annoying mistakes.

When buying yarn, make sure that it is of the same thickness;
Counting loops according to the pattern will help avoid mistakes;
Pay attention to the wrong side - uniform yarn tension will ensure a beautiful appearance front side;
To prevent threads from tangling, place balls of different colors in special boxes with holes before starting knitting;
Ornaments in this technique are presented not with a text description, but with diagrams, which is a more convenient option, since the appearance of the pattern is visible in advance;
One cell of the pattern - one loop, one horizontal line - a row, knit along them from the bottom up;
Even rows are purl rows, they should be passed from right to left, and odd rows are knit rows, respectively, they should be read from left to right. In knitting in the round, everything is read from right to left;
The color of which particular loops are knitted is indicated in the note;
Rapport is a repetition of the pattern motif; in the diagram they look like thick vertical lines;
If the pattern seems complicated, then you can knit only the main large sections, and embroider the details using a loop-to-loop stitch;
Start knitting with a pattern sample, this will help you evaluate the density of the fabric and better understand how to knit the pattern.

A detailed description of the motifs is shown in the illustrations below. Deer for every taste are just begging to be put on a sweater.

Knitting patterns

A large selection of diagrams will tell you how to correctly calculate capricious loops.

Video on the topic of the article

Contains detailed description technology jacquard knitting knitting needles, including methods of weaving threads from the wrong side.

Creating an original knitted clothes- the process is interesting, but long and labor-intensive. Knitted patterns men's sweaters differ in seasonality and complexity of execution. Even a novice needlewoman can knit a simple sweater without intricate patterns.

How to calculate the number of loops for knitting parts

The number of loops of each part depends on:

selected knitting pattern;
thickness of yarn and knitting needles used;
clothing size.

You need to make a control sample of the pattern, which will be used to determine the number of loops.

Determining the number of loops for the components of a sweater is carried out as follows:

Taking measurements: girth of the neck, chest, waist, hips, arm, elbow, wrist; armhole width and length; length of the entire product; length to armhole; length of shoulder, arm to elbow, sleeves.
The degree of fit is determined finished product. A medium-fit model will require an increase of 6 cm to the width of the product. For a wide item, the increase can be up to 20 cm.
According to taken measurements A product pattern is drawn on paper, which is used to compare during the work process. Instead of a pattern, you can use another, ready-made sweater.

Master class step by step for beginners

Knitting a men's sweater with knitting needles will not be very difficult if you choose a simple pattern for this, for example, stockinette stitch. Yarn for the product will require from 600 grams.

After measuring all the parameters, selecting knitting needles and threads, it is necessary to determine the number of loops for the front and back (it will be the same for both parts) using the finished knitting sample: the width of the product is multiplied by the number of loops in the sample and divided by the length of the control sample. The resulting number will be the number of loops for the front and back pieces.

The knitting process looks something like this step by step:

First you need to cast on the stitches for the back.
Knit the first line with facial stitches.
Knit the second row with a 1x1 rib.
Knit a few cm with an elastic band.
After the rib stitch, switch to stockinette stitch (garter stitch on the front rows, stocking stitch on the purl rows).
Knit the fabric up to the armholes.
Now decrease 5-8 stitches from each edge for the armholes.
Next knit without changes to the neck.
For the neck, close 10-15 central loops. In each subsequent row from the center, fasten 3-4 loops until the length of the shoulders is the desired length.
Check the part with the pattern, if there are no necessary modifications, close all the loops.

Knitting the front follows the same pattern, only the neckline needs to start a little lower than the back. Cast off 8-10 stitches in the center, and cast off 2-3 stitches for the shoulders in the next rows. The number of loops for the front shoulders should be equal to the number of loops for the back shoulders.

The sleeves are also knitted according to the pattern. The set of loops is made based on the circumference of the wrist. A few 1 cm are knitted with an elastic band, then the transition to the main pattern occurs. Monitoring the expansion of the part along the pattern, it is necessary to add loops at the beginning and end of some front rows.

Once the desired length is reached, finish the sleeve. The second sleeve is knitted in exactly the same way.

When all the parts are ready, proceed to assembling the product, this is done like this:

sew the front with the back on the sides up to the armholes (all seams are made from the reverse side);
perform shoulder seams;
Sew the sleeves and sew them to the armholes.

After assembly, tie the neck. For this you will need circular knitting needles. The loops are made from the closed edge braid along the wrong side. The collar is made with a 1x1 elastic band to the desired height.

Men's raglan sweater with sleeves. Knitting on top

A knitted top item with raglan sleeves has the following features:

knitting goes in circles;
there are no side seams;
not every pattern will be suitable;
large number loops on the knitting needles.

Work on a sweater begins with calculating the neck loops, which is based on the neck circumference. The resulting number of stitches is cast on circular knitting needles. In the 1st row, all stitches will be knit, knitting in a circle. Raglan lines and the center of the front are highlighted with colored threads or pins.

Next, you will need to determine the number of loops for the front, back, sleeves and raglan lines. The number of loops for the back should initially be less than for the front. In order to equalize the number of back and front loops, you need to separately knit a sprout on the back with additions.

The rows here will be knit and reverse purl, loops are added before and after the raglan lines in the knit rows. Now the knitting will go in the round in stockinette stitch with additions through the row. The product needs to be tried on from time to time. When the raglan lines reach the required length, re-slip the sleeve loops and pick up the hem loops with crossed yarn overs.

Next, the back and front are knitted together in the round to a certain length. The bottom is decorated with an elastic band. Finish the work on the product by knitting the sleeves. The sleeves are knitted on circular needles with gradually decreasing stitches. The cuffs are decorated with elastic.

Youth sweater with hood

Knitting a hooded sweater is not too different from working with a regular pattern.

Any pattern and yarn can be used. The back and front are performed according to the standard pattern: straight fabric to the armholes, decreasing stitches for the armholes, regular knitting to the neckline, knitting the neckline with a central decrease, knitting the shoulders. Sleeves can be anything.

The easiest way is to knit the hood separately, and then sew it to the finished product. The future hood has the shape of a rectangle, the side of which is equal to the length of the neckline. After casting the required number of loops on the knitting needles, you can knit the first few rows with an elastic band, you can immediately start with the pattern.

The rectangle is knitted to a height equal to the length from the neck to the crown with an addition of 5 cm. The loops are secured at the desired height. The rectangle is folded in half. One side of it is stitched. The other side is sewn to the neckline.

Knitting a hood from the neckline: pick up stitches from the edge of the neckline onto circular knitting needles, knit a rectangle to the desired height, bind off the loops and sew the upper part.

Thick yarn sweater

Knitting a men's sweater with knitting needles from thick yarn is much faster than from thin yarn. To knit such a medium-sized item, you may need up to 1 kg of yarn. The knitting needles should be 2 times thicker than the threads. A sweater made from thick yarn should not be too tight.

The work begins with measurements, selection of a pattern and a set of loops. The straight back fabric is knitted up to the armholes, followed by decreasing stitches along the edges in 3-4 rows. Continue knitting to the neckline, knit the neckline. The front is knitted in the same way, only you should start knitting the neckline lower than on the back.

For sleeves, it is better to choose a shape with a drop at the bottom and elastic at the cuffs: knitting starts from the wrist with a gradual addition of loops. After assembling the product, you need to pick up loops for the collar along the edge of the neck. It is better to make the collar with an elastic band.

Sweater made of fine cotton yarn

A knitted cotton pullover will look original if different patterns are used to knit its parts, for example, a “Rhombus” pattern can be used for the front and back, and a “Putanka” pattern is suitable for the sleeves. To work you will need about 500 grams. yarn.

Tie the first few cm with an elastic band.
Then go to the main pattern, knit to the armholes, decrease the loops along the edges, knit to the neckline, knit the neckline.
Knit the front part in exactly the same way, only the neckline will be a little deeper.
The sleeves are knitted and dropped downwards. Sew the details of the product.

Neck strap:

cast on the knitting needles connected by fishing line from the edge of the neckline;
knit 10 rounds with knit stitches;
close the loops and fold the collar.

Men's sweater with deer

Creating a classic New Year's sweater with deer is a more complex task that will require experience working with several colors of thread. First, the necessary calculations are made, and a pattern for the future product is drawn from them. The drawing diagram is described in detail on paper sheet into a cage.

The step-by-step process looks something like this:

Knitting a sweater begins with a basic tone thread and an elastic band.
Then they move to the front surface, only on stockinette stitch You can knit colored patterns.
Knit to the point where the pattern will begin.
A thread of a different shade is introduced into the work at the beginning of the row.
Next, knit according to the drawn pattern.
Now 2 threads are involved in the work; the main thread is used for the background, and an additional thread is used for the deer.
The thread that at the moment not used, simply passed along the wrong side of the product.

Knitting is happening in the usual way: first the back and front, then the sleeves. It is important to note that the drawing begins and ends on all parts at the same level.

Sweater with braids

Knitting a men's sweater with knitting needles or braids is not at all difficult. In the process of work, facial loops, purl loops, and moving loops will be used. The strands are knitted along the front surface. The location of the braids on the parts of the product can be absolutely any.

After counting the loops, casting them on knitting needles and knitting the edges, you need to move on to the ornament of the product. Loops not involved in knitting braids are knitted purl or knotted.

The tourniquet is tied like this:

First, the number of loops for the braid is determined, it must be even;
then the first half of the loops is removed onto an additional knitting needle, you can leave them on the front side, you can transfer them to work;
knit the 2nd half of the loops of the tourniquet with facial loops;
now knit the stitches from the additional needle also with knit stitches;
the purl row is knitted according to the pattern;
knit weaves through a set number of rows according to the pattern.

The details of the product as a whole are knitted in the usual way. After completing the knitting, the elements are sewn together and the neckline is knitted.

With beautiful ornament

Knitting a beautiful fancy sweater is not easy; it requires a lot of experience and a sense of combining colors and patterns. The combination of stripes of the front surface with thin strands on purl stitch and a colored ornament along the chest line - a very impressive and unique men's model.

The work process begins with calculations, creating patterns and drawing diagrams. After a set of loops, an elastic band is knitted, after which they move on to an ornament with small strands.

Pattern: 7 knit stitches, 3 purl stitches, move 3 stitches to an auxiliary needle and leave them at work, 3 knit stitches, 3 purl stitches; repeat the rapport until the end of the row. Knit reverse rows as the stitches look. Make crossings every 4 rows.

When the canvas reaches chest level, you need to switch to stockinette stitch and colored patterns. Incorporate a thread of a different color into the work, knit the ornament according to the pattern, alternating the main thread with the additional thread. When the colored ornament is completed, go back to the pattern with strands and finish the piece.

Sweater with snowflakes

A brown sweater with white snowflakes and a high collar is knitted this way:

A pre-calculated number of loops is cast onto the knitting needles, the same for the front and back.
The fabric is knitted with a 2x2 elastic band to chest level using brown thread.
This is where the strip of stockinette stitch with snowflakes will begin. A white thread is connected to the work, the first 2 rows are completely knitted with a white thread.
Next, knit according to the “Snowflakes” pattern, alternating white thread with brown, knit stitches, and purl stitches on the reverse side.
The upper border of the front surface is also marked with a white line.
Each piece is completed with a 2x2 elastic band.
The sleeves are knitted in a similar way, the white lines and snowflakes should be on the same level as the back and front patterns.

After assembling the product, if desired, knit a high, tight collar.

With golf collar

The golf collar will suit almost any model of winter men's sweater. After all the necessary calculations, put the loops on the knitting needles first for the back. You can start knitting immediately with the selected pattern. When the knitting reaches chest level, decrease on both sides for the armholes. After knitting to the neckline, knit the neckline and shoulders.

The front part differs from the back only in the deeper neckline. The sleeves can be knitted straight or tapered. After assembling the product, work with the collar begins. Cast on stitches on circular needles around the entire circumference of the neckline. Knit collar with 1x1 rib. The collar height should be about 20 cm.

Finally, secure the loops at the desired height.

With jacquard pattern

Jacquard patterns are a cyclic repetition of a pattern in a contrasting color, very suitable for warm clothing. To avoid mistakes before knitting, it is recommended to draw detailed diagram pattern.

Knitting a men's sweater is easy - diagrams, photos and descriptions of the process will help you cope with the work yourself

Description of knitting male model:

Select knitting needles and threads of 2 or several colors.
Cast on the loops on the knitting needles with a thread of the main color and tie an elastic band.
The jacquard pattern can be started immediately after the elastic. A thread of a different shade is introduced into the work. The pattern is knitted using stockinette stitch. The unused thread is pulled from the reverse side. The outer loops are knitted with two threads.
Knit using a jacquard pattern to the desired height. You can do several horizontal stripes with various designs. You can knit the whole thing with a jacquard pattern.
When knitting individual elements of a sweater, it is necessary to ensure that the level of the pattern on the sleeves, back and front is consistent. The technique for making the parts is standard.

You can learn how to knit a sweater with a jacquard pattern from this video:

Color combination for men's sweaters:

black with white, gray, red;
blue with grey, white, blue;
green with gray, blue;
gray with yellow.

Ribbed

The ribbed pattern consists of horizontal, vertical or diagonal raised stripes, very suitable for men's sweaters. When knitting a sweater with a vertical rib, an ordinary elastic band is used. When knitting horizontal stripes, several rows of stockinette stitch alternate with rows of purl stitch.

If you need to get a diagonal hem, you can use the techniques of knitting loops with an angle.

Men's pullover rib can be knitted using the technique of knitting from above (the work begins from the collar with the “Vertical Rib” pattern, after which the loops are distributed, the shoulders, back, front, sleeves are knitted) or in the usual way (each part is knitted separately according to the pattern, the parts are sewn together, the collar and elastic band are knitted below and on the cuffs can be omitted).

How to assemble the product

The finished pieces of a thick men's sweater are assembled by hand. To do this, use a thick needle (the hook is not recommended for assembly) and thread, from which the product is knitted. First, the product is sewn along the shoulders; it is better to put a ribbon on the wrong side of each shoulder, so they will stretch less.

When assembling, the parts are folded evenly and each loop is sewn. After the shoulders, side seams are made and the sleeves are sewn together; the assembly is completed by sewing the sleeves to the armhole area. Thin knitted items can be sewn using a sewing machine.

Patterns for men's sweaters

The following patterns are suitable for knitted men's sweaters:

chessboard;
embossed cell;
prostitute;
diamonds;
diagonal stripes;
tourniquets;
various combinations of patterns.

Yarn consumption for a men's sweater

Model	Amount of yarn in grams and meters
Long, high-neck sweater made from fine yarn	400 gr. or 2100 m
Pullover, knitted pattern « English gum»	600 gr. or 3000 m
Sweater knitted at the top with raglan sleeves	500 gr. or 1500 m
Sweater with braids	700 gr. or 2100 m

If you follow exactly step by step description, then knitting any model of a men's sweater on knitting needles is not at all difficult and even interesting. You can always get creative with a combination of patterns. The main thing is that you like the work.

Article format: E. Chaikina

Useful video about knitting a men's sweater

Video demonstrating knitting a men's sweater using 2 types of loops - knit and purl stitches:

Jacquard patterns with Norwegian motifs - deer, snowflakes, stylized crosses, etc. - are perhaps a classic that will never go out of style. If you like deer on a sweater, try knitting them according to your chosen pattern (which are very varied). There is no particular difficulty in this; you just need to be careful when working with colored yarn and the sweater with deer will be ready.

Options for placing animals on a sweater:

alternating stripes of jacquard patterns throughout the product (deer, snowflakes, hearts, six-leafed leaves, etc.);
the ribbon with deer is located in the center of the sweater, and is complemented with stripes of other ornaments at the top and bottom;
stripes with deer are at the top and bottom of the sweater, and other patterns frame them, leaving the middle monochromatic (sometimes it is knitted in various arans), or the middle is also filled with ornaments;
deer can be positioned on the sweater in one direction or towards each other;
sometimes such a sweater is a thing on which one large animal is knitted in detail, and not in the form of a pattern, as in ornaments. This is more complex and time-consuming than making jacquard stripes, but they are somewhat easier to knit due to less color changes.

Such products cannot be called only men's or only women's. Depending on the chosen scheme and color scheme, they are perfect for mom, dad, son, and daughter. And if you knit them for the whole family at once and go on an autumn bike ride together, you will certainly attract attention as a stylish, fashionable family.

The knitting pattern for such patterns is more tender and touching for children, and more brutal for dad. For mom, the design of such a sweater can also include romantic motifs (hearts, for example).

If your family has become fond of such motifs, you can knit other things in addition to sweaters: scarves, hats, mittens, socks. You will have a whole wardrobe for your household, who will now be provided with different types necessary warm clothes.

When performing multi-colored motifs, there are several points that require attention:

the skeins will constantly get tangled, so you need to take care of the container in which they will be located (a box with holes for threads, an old kettle with a spout, etc.);
when knitting such patterns according to the pattern, you need to carefully count the loops of each color;
on the reverse side, the yarn should be carefully intertwined so that no holes or pulled areas are formed on the front side.

Methods of weaving threads

To knit a jacquard pattern according to the chosen pattern, threads of each color on the wrong side are intertwined in different ways:

weaving (working with one skein of selected colors; when knitting, their threads are intertwined between sections of different colors). In this option, it is possible that holes are formed on the front side (with weak weave) or tight areas (with tight weave);

fastening (threads of a different color are intertwined after each knitted loop and remain on the wrong side). This method of knitting is more reliable, but requires careful pulling so that the yarn of a different color does not peek out from the face;

crossing (this option is used when knitting a large pattern) - there can be several balls of the same color in the work: each new colored section is knitted from a separate ball, when changing threads they are crossed from the wrong side and a different color is introduced into the knitting.

Tip: to knit a neat product with colored areas, make sure that the yarn is of the same thickness (or better yet, of the same quality; for this, buy the same brand of yarn).

To knit a sweater with deer or other colored patterns, you will need care, accuracy, and attentiveness. Perhaps the first experience of such knitting will not be very successful, the product will turn out “clumsy”. Therefore, before tying a large object with an ornament, practice on control samples, work out the strength of tightening the threads, working with several balls, and pay attention when reading the diagram (see below). When the quality of knitting the test sample suits you, you can knit a larger item.

An original pullover for a man with a great sense of humor. The decor of the pullover uses a jacquard pattern that adds originality.

Size 56/58

You will need:

600 g white (No. 17) and 250 g taupe (No. 42) yarn “Mille II” (50% merino wool, 50% acrylic, 55m/50g) from Lana Grossa, knitting needles No. 8,
circular knitting needles No. 8,
thick needle.

Patterns and knitting:

Rubber: Alternately 2 persons. p., 2 p. p.

Facial surface: Persons r.: persons. p., out. R.: out. p.

Jacquard pattern A, B and C: Knit faces. satin stitch, according to pattern A, B and C, while unused threads should be loose on the back side of the work.

Motif O and E: Embroider with a chain stitch, according to pattern D and E.

Knitting density: Jacquard patternpersons satin stitch: 12 p. and 16 r. = 10 * 10 cm.

Before:

White yarn cast on 70 sts, knit with an elastic band of 5 cm, and start after the edge. from 1 person, finish 1 person. in front of the chrome In the last (purl) row, add 1 p. = 71 p. Next knit. satin stitch as follows: 18 r. Jacque. rice. A: chrome, rap., 1 p. after rap., chrome; 8 rub. white yarn; 4 rub. Jacque. rice. In: chrome, rap., 1 p. after rap., chrome; 22 rub. white yarn; 4 rub. Jacque. rice. IN; 9 rub. white; 19 rub. Jacque. rice. C: knit pattern symmetrically from the middle, finish part with white color. At the same time, at a height of 40 cm for the armholes of the sleeves on both sides, close 2 times for 3 sts, 1 time for 2 sts in each 2nd r. = 55 p. At a height of 59 cm for the neckline, close the middle 11 p., knit both sides separately, while to round the neckline, close 2 times for 2 p., 1 time for 1 p. in each 2nd r. At a height of 64 cm, to bevel the shoulder, close 1 time in 8 p., in the next 2 r. 1 time 9 p.

Men's pullover with deer description:

Back:

Knit the same as before, but without the neckline. After completing the shoulder bevels, close off the remaining 21 sts. Sleeve: White yarn. cast on 34 sts, knit with an elastic band of 5 cm, and start after the edge. from 1 person In the last (purl) row, add 1 p. = 35 p. Next knit. satin stitch in the sequence of alternating patterns as on the front part, while knitting the pattern symmetrically from the middle. At the same time, to bevel the sleeves on both sides, add 9 times, 1 stitch in every 6th row. (insert the added loops into the pattern) = 53 sts. At a height of 41 cm for the roll-up, close the sleeves on both sides 1 time, 3 sts, in every 2nd p. Next, decrease *1 time by 2 sts (after the edging from the beginning of the row and before the edging at the end of the row, knit 3 sts together). 1 time 1 p. (after the edging from the beginning of the row and before the edging at the end of the row, knit 2 sts together) *, repeat 2 more times from * to *. 1 time, 1 p. Close off the remaining 27 p.

Assembly :

On the front and back parts, embroider the design using a chain stitch, according to pattern P, with rap. from arrow to arrow is repeated 3 times (see photo). In the middle of the sleeves, embroider a pattern using a chain stitch, according to pattern E (see photo). Execute

Shoulder seams. On circular knitting needles, cast on 52 sts from the edge of the neckline and knit with a 23 cm elastic band. Close the loops loosely, without tightening. Sew side seams and sleeve seams. Sew in sleeves.