V Everyday life modern woman there is time for everything: work, family, childcare and numerous hobbies and hobbies. Knitting is one of the most popular leisure activities for women of all ages. After all, thanks to him, you can make with your own hands a unique thing that will perfectly fit your figure. As you know, a big problem for a woman is the choice of the optimal hat model. It is necessary that the headdress is beautiful, fits comfortably on the head and does not distort the shape of the face. Knitting saves you from painful shopping trips and searches required model... With a minimum amount of skills and time, you can knit a female headdress, the diagram of which can be found below. In our article, we offer you several options for women's hats, knitted only with knitting needles, with which it is easy to figure out the diagrams and description of work. Simple to execute and interesting models help you look stunning every time you go out.

We knit a women's hat with knitting needles from melange yarn with a pattern

An excellent option for those who do not like to suffer with patterns and prints is melange. This yarn is very pleasant to the touch, and soft color transitions solve the problem of choosing a pattern for one or two. This model is nevertheless adorned with a light structural pattern that even a beginner can do very easily.

To complete this model, you will need 100 g melange yarn thickness 125m / 50g and stocking needles No. 7. The hat is knitted in two threads. With a head circumference of 50 cm, you cast a total of 68 loops (17 loops per knitting needle) and perform the structural pattern as follows: knit round, in the first circle perform alternately 1 front loop and 3 purl. In the second round, first knit 2 knit loops, then purl 1 and 3 knit loops and continue the circle with purl 1 and 3 knit loops. Thus, alternate the first and second circles. After you knit 20 cm with such a pattern, you need to make decreases as follows: in every second circular row on each side, you need to knit 2 loops together, repeat this action 8 times. Pull off the remaining loops with a working thread.

We make a patterned version of the headdress with our own hands

This model will look better in an ensemble with a black classic coat. It is made with braids and an openwork pattern on the needles. We offer you a scheme and detailed instructions about how to knit this hat for women with knitting needles. To complete this model, you need 2 skeins of acrylic or cotton yarn 180m / 50g, circular knitting needles # 3, stocking needles # 3 and one auxiliary knitting needle. First, we cast on the needles 147 loops. You can knit 4-5 rows with 1x1 elastic, then you need to knit according to the pattern below.

There will be seven rapports in one row. In height, you need to knit 96 rows, or just repeat the pattern 12 times in height. Then we begin to decrease the loops on the cap as follows.

1st row: we knit two purl loops together, then one purl, six front, yarn, remove one loop and knit one front. We stretch it through the removed loop. Next, we knit five knit, two knit together and a yarn. We repeat these actions to the end of the row.

2nd row: we knit two purl, six front, three purl, nine front, and so on until the end of the row.

3rd row: two purl, six facial, 2 purl together, 1 purl, 1 front and yarn. Remove one loop, then one front loop. We stretch it through the removed loop. Next, 3 knit, 2 knit together and yarn over. Then we repeat the steps to the end of the row. This leaves 133 stitches on the spoke.

4th row: purl 2, knit 6, purl 2, knit 9, and so on until the end of the row.

5th row: purl 2 together, knit 6, purl 2, knit 2, yarn, remove one loop. Then one front, which we pull through the loop we just removed. Further, 1 front, 2 front together, yarn and two front. We repeat the steps to the end of the row.

6th row: knit, purl 1, knit 6, purl 2 and knit nine, knit to the end of the row.

7th row: we knit one loop on the wrong side, we remove three loops on the auxiliary knitting needle before work, we knit further three front ones, then we knit three front loops from the auxiliary knitting needles, two purl loops together, three front loops, yarn, remove one loop. Next, we knit the two front ones together and stretch them through the removed one. Then a yarn over and three front ones. As a result, you should get 119 loops.

8th row: purl 1, front 1, remove 1 loop. Now we knit one knit one and pull it through the removed loop. Then 3 facial, 1 purl, 9 facial. After completing the row, 112 loops should remain.

9th row: purl 1. 2 front, 2 front together, 1 front, 1 purl, yarn. We remove the loop, knit the next one with the front one and stretch it through the one that was removed. Next, 5 knit, 2 knit together and yarn over. This leaves 105 stitches.

10th row: purl 1, knit 4, purl 1, remove one loop. Then one front, which we stretch through the shot. Then 5 facial and two facial together. Total: 91 loops.

11th row: purl 1, knit 4, purl 1, remove 1 loop, knit the next one with the front loop and stretch through the one that was removed. Then 3 facial and 2 facial together. Remaining 77 sts.

12th row: 1 purl, 4 front, 1 purl, remove one, then one front, which we stretch through the removed loop, Next, 1 front and 2 front together. The total of the row: 63 loops.

13th row: 1 purl, 1 remove, the next knit with the front and stretch through the previous one, Next, 2 front together, 1 purl and 3 front. There will be 49 stitches in total.

14th, last row: purl 1, knit 2, purl 1, then remove 1 loop, knit the next knit and stretch through the removed loop. 35 stitches remain.

The final touch: pull together all the remaining loops with a working thread and hide the tail.

A selection of patterns for hats:

A selection of video tutorials for beginners

The hat and scarf set made of melange yarn looks great thanks to the "lush columns" pattern.

Beanie The size 56-58 Difficulty level: simply.

Materials (edit): melange yarn - 100 gr. (80% wool, 20% acrylic, 100 g / 100 m), hook number 8.

Work description: Dial out of 50 air loops chain, close in a ring, and knit according to the pattern in a circle straight. Make lifting loops at the beginning of the row, and at the end of the first loop with a connecting post. Start decreasing stitches from the 7th row. In the 10th row of the last, knit 2 - 3 single crochets with a common top. Cut the thread and secure from the wrong side. Knitting hats:

Scarf Dimensions (edit) 28 x 240 cm. Materials (edit): melange yarn - 500 gr. (100 g / 100 m, 80% wool, 20% acrylic), hook number 8.

Work description: Cast on a chain of 25 loops and 4 air. lifting loops and knit straight according to the pattern. Make lifting loops at the beginning of each row. The diagram shows half of the work. Starting at the 35th row, knit, alternating patterns in reverse order.

Scarf knitting pattern:

For the tassels, cut the yarn to 40 cm, fold in two, fold in half and secure along the short sides of the scarf.

Brush Binding Scheme:

With the onset of cold weather, each person needs warm clothing. The hat will protect and warm your head. But, as always, for the new season I want to have a new thing that will be not only beautiful, but also warm. It is not so easy to buy a hat in a store that will meet all the requirements. But there is a way out! You just need to buy quality threads and knit it yourself.

Hats for women and girls, knitted of variegated melange yarn, have a special charm. When knitting from colored yarn of sectional dyeing, a unique pattern is born each time, and even if you knit two things from one ball with the same pattern - for example, an oblique with a shadow - they will still turn out to be completely different. A beanie hat, knitted from fluffy multi-colored mélange yarn, and a beanie from delicate velor, will also look great. If you are afraid that the hat will not turn out enough for winter, it can be knitted either from warm woolen or mohair yarn, or provided with a warm fleece lining.

For needlewomen who are engaged in knitting, there is a huge selection of yarn. It can be different not only in color, but also in composition. The most practical and demanded already long time is a melange yarn. If you translate the word "melange", you get a "mixture". It is the mixture of different colors and shades that constitutes the melange yarn.

The assortment of such a thread is large. You can even find colors that, it would seem, do not even match. Or maybe a thread of the same color, only different, close shades.

You could get such a thread before by connecting different threads into one. Modern manufacturers use special technologies to produce real melange yarns. In it, one thread can be dyed in different colors.

Melange yarn is very interesting. It can be used for knitting various products, including hats. Thanks to the thread of different colors, the product is obtained with pronounced stripes or areas that differ from each other. A thread with glitter will allow you to get an excellent iridescent canvas, which cannot leave others indifferent.

Patterns

Melange yarn has one undeniable advantage: you do not need to come up with complex and intricate patterns. Even if you knit a canvas ordinary garter or hosiery knit, then it will look original and elegant.

Melange yarn for beginners - real find... First of all, there is no need to "suffer" with intricate pattern... Well, secondly, minor defects that can be made as a result of knitting will be completely invisible due to the variegation of the canvas. The best place to start is simple scarf and hats, and over time to improve their skills.

If you knit a 1x1 or 2x2 elastic band from such threads, then the loops will not be very noticeable anyway. So, from melange threads the following simplest patterns are knitted:

  • hosiery;
  • shawl;
  • any elastic band;
  • rice knitting, etc.

Schemes knitted patterns can be found on the internet. The choice of a pattern for the cap, as always, is yours. If you need a tight knit, then you can knit braids, if the canvas should be moderately thin, then a simple front surface will do.

Patterns for women's hats

Depending on the thickness of the selected thread, the yarn will be consumed. When knitting hats, a thin thread is folded in two folds so that the product is dense and warm.

To tie such women's hat, you need to fold a thin thread in half. Finding out the number of loops that you need to knit this model is very simple. You just need to knit a sample of the pattern according to the scheme or according to the description, selected threads, and use it to calculate how many loops will go in a centimeter. Having measured the circumference of the head, and knowing the number of loops in a centimeter, you can easily calculate the number of loops for the product.

This model is made on 4 knitting needles, but you can knit it on 2, but there will be a seam at the back.

Basic knitting:

  1. row: 1 person, 3 out;
  2. row: two persons, * 1 out, 3 persons *;
  3. as 1st;
  4. as 2nd.

Since the description is quite simple, the scheme will not be required for it..

With such a pattern, you need to knit 20 cm.After that, you need to make decreases. To do this, on each knitting needle, first, you need to knit 2 stitches together. It turns out that in a row 4 points are reduced at once, and at regular intervals. Such reductions need to be done eight rows in a row. Those loops that remain are simply pulled together with a working thread. The product is ready.

Hat knitted from melange raspberry yarn

Main pattern:

From row 13, the pattern is repeated from row 1.

The required number of loops is typed on the knitting needles and knitted with the described pattern of 15 cm.Further, the work continues face stitch... At a height of 25 cm from the start of work, you need to draw up the bottom. At regular intervals, 2 stitches are knitted together with the front... Several rows are repeated in this way, the main thing is that each subsequent decrease must be done over the previous one. The remaining loops are pulled together with a working thread. A side seam is being made.

Knitted women's gray hat

This product is very interesting. To knit such a hat, you will need melange yarn. gray shades medium density. In order to see how the pattern looks on these threads, it must be knitted using a diagram or description. Having received the sample, we make the necessary calculations and determine the number of loops for the product.

As you can see from the photo, instead of an elastic band, a wide rim is used, tied with a garter stitch. The top of the cap is knitted with a spikelet pattern. It can be obtained from the vertical tracks of the long dropped knit stitches in garter stitch. When subtractions are made, these spikelets become closer friend to a friend, and at the end of the work - they are connected at the top of the head.

Getting Started.

We put on the knitting needles the required number of loops and knit with garter stitch 15.5 cm.Next, we begin to make decreases. Two loops are knitted together after the hem, and then each is 7 and 8. At a height of 17.5 cm from the beginning of knitting, we make decreases again. We knit the first two sts, then we knit 2 sts together, the subsequent decrease will be with each 5 and 6 loops.

When the canvas turns out to be 21 cm, you need to make spikelets. Knits: hem, 2 p. Garter stitch, * 3 spikelet stitches *, 3 p. Garter stitch. Repeat from * to *. The spikelet is made only in 36 rows, you do not need to dissolve below. There is no scheme for this pattern.

After completing the "spikelet", you need to pull off the remaining loops with a working thread and sew the product.

Women's hat, knitted with thick knitting needles

With thick threads and thick knitting needles, the hat can be knitted in a matter of hours. There will be fewer loops for work, and the product will knit in height very quickly. The hat is knitted without a lapel, and a pom-pom adorns it on top.

The pattern for such a hat is the simplest one:

  • front surface;
  • pearl pattern.

Front stitch: all front loops in the front row, and purl - in the back row.

Pearl Pattern:

  1. row: persons, purl;
  2. row: the purl is knitted over the front, and the front is knitted over the purl.

The pattern is repeated as row 2... The pattern diagram is not needed, as the description is complete.

The loops typed on the knitting needles must be distributed so that the pearl pattern is repeated twice (in front and behind). For example: 15 stitches with front stitch, three stitches of pearl pattern, 15 stitches with front stitch, 3 stitches of pearl stitch. You need to substitute your own number of loops for the front surface. For a pearl pattern knitted with thick threads, 3 loops will be enough.

The proposed pattern knits 17 cm, then you need to make subtractions. So as not to get hurt beautiful pattern, decreases are made on the front surface, at the beginning and end of the section. Nicely knit 2 loops together. So, in one row, 4 subtractions are obtained. You need to tie 6 such rows, and after that, the remaining loops must be pulled together with a working thread. The knitted item is ready.

Advantages

If you like to create beautiful fashionable things with your own hands, then our article with detailed description and diagrams on how to knit a hat for a woman especially for you.
Honestly, today every woman is obliged to be able to knit, because there is nothing more pleasant than the opportunity to pamper yourself and loved ones with budget new clothes.

How to knit a warm hat for women?

If you're still a beginner, you can start with our first tutorial on how to knit a simple hat for a woman. As visual aid you can use the videos we have selected on how to knit a hat for a woman.


How to knit a simple beanie hat

Knitting a beautiful hat is not as difficult as it seems. To do this, you need to arm yourself with knitting needles, yarn and patience.

Necessary:

  • 125 g mohair
  • knitting needles 4.5 mm

PP ( patent loop) = insert the right knitting needle into the next stitch one row below (fold the stitch of the current row).

Description:

Popular articles:

Cast on 75 stitches and knit with elastic as follows:
1st row (LS): 2 persons, * 1 life, 1 person; repeat from * to the last loop, 1 person.

Tie 8 more rows with an elastic band, finish on the purl row.

1st row (RS): 1 person, * PP, 1 person; repeat from * to the end of the row.
2nd row (IS): 2 persons, * PP, 1 persons; repeat from * to the end of the row.
Repeat 2 rows of the pattern until the cap is 26 cm from the set of loops, finish in the wrong row.

Apex formation:
1st row (RS): 1 persons, * PP, 3 life together; repeat from * to the last 2 sts, PP, 1 person = 39 sts.
2nd row (IS): 1 person, * 1 life, 1 person; repeat from * to the end of the row.
3rd row (RS): * 2 persons together; repeat from * to last loop, 1 person = 20 loops.
4th row (IS): 1 life, 9 times, 1 (0) out = 11 loops.

Beautiful hat for the winter from angora



Necessary:

  • 120 g angora
  • circular needles 5 mm
  • loop marker
  • set of 5 mm double-edged needles
  • knitting needle

Garter stitch: knit stitches in each row.

Openwork pattern (the number of loops is a multiple of 7).
Round 1: Knit.
2 circle: * 1 persons., 2 persons. together, yarn, 1 person., yarn, 1 p. remove, 1 person. and stretch it through the removed item; repeat from * to the end of the circle.
Circle 3: Knit.
4 circle: * 2 persons. together, yarn, 3 persons., yarn, 1 p. remove, 1 persons. and stretch it through the removed item; repeat from * to the end of the circle.
Repeat 1-4 rounds. row of pattern.

Description:
Cast on 84 stitches on circular needles. Do not connect in a circle, knit in straight and reverse rows with garter stitch 2.5 cm.Place a marker at the beginning of the row and connect in a circle. Repeat round 1-4. ranks openwork pattern 6 times.

Apex formation:
Switch to double-edged needles when the number of stitches decreases.
1 circle: * 10 persons., 2 persons. together; repeat from * to the end of the circle = 77 p.
Round 2, 4 and 6: Knit.
3 circle: * 9 persons., 2 persons. together; repeat from * to the end of the circle = 70 p.
5th circle: * 8 persons., 2 persons. together; repeat from * to the end of the circle = 63 p.
7 circle: * 7 persons., 2 persons. together; repeat from * to the end of the circle = 56 p.
8 circle: * 6 persons., 2 persons. together; repeat from * to the end of the circle = 49 p.
9th circle: * 5 persons., 2 persons. together; repeat from * to the end of the circle = 42 p.
10 circle: * 4 persons., 2 persons. together; repeat from * to the end of the circle = 35 p.
11th circle: * 3 persons., 2 persons. together; repeat from * to the end of the circle = 28 p.
12th circle: * 2 persons., 2 persons. together; repeat from * to the end of the circle = 21 p.
13th circle: 1 persons., 2 persons. together; repeat from * to the end of the circle = 14 p.
14th circle: 2 persons. together; repeat from * to the end of the circle = 7 p.

Cut off the thread, leave a long end. Insert a piece into a knitted needle, pull through the remaining loops and pull off. Thread from a set of loops into the needle and sew a garter stitch. Hide the remnants of the threads from the seamy side.

Warm weed hat

Necessary:

  • 100 g yarn weed
  • knitting needles number 6.

Description:
Start knitting by casting 60 stitches on the needles no. 6. Knit with a 1x1 elastic band, about 4 cm.

In order to expand the circle, add 1 loop with a twisted yarn after every 5 loops. Then knit straight 5 cm, then start decreasing 1 loop in each front row every 5 loops. Collect the remaining loops (there will be about 10 of them) with a needle on a thread folded in half, and then fasten it.

The hat must be sewn with a knitted stitch.
(On YouTube, you can watch a video on how to knit a simple hat with knitting needles.)

How to knit a fashionable hat

After you have learned to knit plain hats, you can move on to more complex models. In 2018, the following models will be relevant: a voluminous hat, a hat with earflaps, a beanie (also called a hat-stocking, -sock, -cap), a turban, a hood (or a hat-helmet), a model with a visor, a hat with a pompom, double a naughty hat with ears, a usual one with a lapel, a snood hat (or a cap-hood).

Fashionable voluminous hat made of chunky yarn

Universal size 53-54 cm.

Necessary:

  • thick yarn 200 g
  • circular needles 10 mm, length 40 cm
  • loop marker
  • thick knitted needle

Description:

Cast on 32 loops. Place a marker at the beginning of the row and connect in a circle.
Knit with an elastic band as follows: * 2 persons, 2 out; repeat from * to end.
Run 14 more circular rows and evenly subtract 2 loops, knitting 2 persons together in the last round of rzinki = 30 loops.
Next, knit 12 circular rows only with front loops.

Track. circle: knit 2 knit together = 15 loops.
Perform 2 more rounds with knit stitches. Cut off the thread, leaving long tail... Insert a piece into a knitted needle. Remove all loops on the thread. Pull and secure the thread on seamy side.

Universal hat with earflaps for women

Size - 54 cm (head volume)

Necessary:

  • 250 g of yarn
  • regular needles 4 mm
    The hat can be knitted in 2 strands.

Ears:
Cast on 6 loops and start knitting a hat with garter stitch. At the same time, add along both edges 6 times every 2 rows, 1 loop each. Then knit 14 more rows straight.

If you add more loops, then your eye will be much wider. If you tie more rows, then likewise your ear will be longer than in the photo. So, you have knitted 2 identical ears.

HAT WITH EAR FLAPS:

Now we collect everything into one product. For this on long knitting needle take turns on the loops from your ears and new ones for the front and back of the cap. Please note that at first, the back of the hat will gradually increase and, as a result, will consist of two parts connected by a mattress seam. For a visual representation, look at the photo of the pattern.

Thus, you need to add 1 loop, knit with the front knit (or any other, if you do not want the option from the photo) loops of one ear, dial an additional 20 loops for the front of the hat, knit the second eyelet and dial an additional 1 loop.

Continue knitting the hat with your pattern or front stitch, as suggested in the photo. At the same time, add loops to expand the back of the product in every second row on both sides of the knitted fabric 1 time by 2 loops and 1 time by 3 loops. This will be about 8 rows. This will be the full width of your header. If necessary, you can adjust it by adding more loops while knitting.

You need to knit about 16 more rows, which will be the height of the cap before tapering at the crown.

Decrease in this way: 1 chrome loop *, 5 person loops, 2 loops with a tilt to the right, 2 front loops, 2 loops with a tilt to the left, 5 person loops *, repeat from * to *, 1 chrome -th loop.
Decrease stitches in this manner 3 more times every 2 rows, and pull the remaining loops after 2 rows. Sew the hat on the back with a mattress seam.

For the front cuff, cast on 20 stitches around the edge and knit with garter stitch to the desired height. then close all loops and attach the lapel in any suitable way.

For braids, you need to cut 18 strands 1 meter long, which fold in half and thread into the bottom of the ears and braid into braids.

Knitted beanie hat (hat-stocking, hat-sock, cap)

Necessary:

  • circular needles 4 mm
  • 200 g medium yarn
  • tape measure

Description:

First of all, using a measuring tape, measure the circumference of the head on which you plan to knit a hat. Let's say you got 56 cm.This means that you will knit a cap of size 56.

The second critical step is to determine the knitting density. What does knitting density mean? This is the number of loops and rows required to knit a 10x10cm fabric. What does it mean in translation into "simple language" - to correctly calculate how many loops will be required at the beginning of work.
Cast on 22 loops and knit 10 cm with the pattern chosen for the hat.

Iron related sample iron through wet cloth... Don't need to iron it too much. Do this gently, lightly “steaming” the sample.
Measure the prepared sample around the perimeter. Let's say you have a sample of 10x10 cm when knitting 30 rows. This means that the knitting density with this pattern will be 2 loops in 1 cm and 3 rows in 1 cm.

That is, for a size 56 cap, you need to dial: 56x2 = 112 loops and knit 30 cm, that is, 30x3 = 90 rows.

Cast on the circular knitting needles the required number of loops. And knit in a circle using the fishing line chosen earlier in the pattern 25-27 cm up. You will succeed knitted fabric in the form of a pipe. After 25 cm, start decreasing the stitches by knitting 2 stitches together in every third row until you have 3 stitches left on the knitting needle. When decreasing the loops, knit the fabric with garter stitch. Tear off the thread from the skein, leaving about 10 cm, and pull it through the 3 remaining loops, knitting them together and securing the end from the wrong side.

Watch the video "tie a beanie".

Wool turban hat for the cold season

Necessary:

  • 150g wool yarn
  • knitting needles number 2.5 - 3

Knitting pattern: 1st row - 1 front loop, 1 purl loop. 2nd row - make a yarn in front of the purl loop, and remove the purl loop without knitting, knit the front loops with the face. The 3rd and all subsequent rows - in front of the purl loop of the yarn, remove the purl without knitting, and knit the front loop and yarn of the previous row together (grab from above).
The cap consists of two parts: the turban itself and the bottom. The height of the turban is 10-12 cm.

Description:
Pick up the turban height, about 24 loops, and knit a strip, the length of which is half the circumference of the head minus 2 cm.
Then divide all the loops in half. Remove the left side with a pin and temporarily do not knit, but on the right side knit 4 more rows. After that, swap both parts so that the right part goes to the left and over the left part. Then put all the loops on one knitting needle and knit the second half of the strip.

If, when knitting the second half, there are two identical loops next to each other, then knit them together (so as not to knock off the picture), and add one loop at the end of the row. When the desired length is knitted, close the loops.

Now cast on loops along the entire length of the strip and knit 7-8 rows with an English elastic band, then 2.5 cm with a 1x1 elastic band. After that, start knitting the bottom: 2 rows of double stocking knitting (knit the front loops with the face, remove the purl loops, the thread remains before work). Then knit 2 loops together over the face, so that the front loop is over the wrong one. Knit 3-4 rows of plain stocking, then 2 rows across the face with double stocking, the next 1-2 front rows - 2 loops together. Pull off the remaining 6-8 loops. Steam the bottom through a damp cloth.

Video "to knit a turban for a woman"

An original bonnet (or helmet) for a very cold season

Necessary:

  • 400 g of yarn
  • knitting needles number 3

Description:
On the needles, you need to dial 31 loops and knit a transverse strip of any knitting that you choose for a 110 cm long frill, so that it has a beautiful and finished look, then make the corners on it in shortened rows.
In each row, be sure to reduce the knitted loops by 2, that is, first, on the front side of the product, you need to knit 29 loops, then leave 2 loops intact, twisting the 30th loop and turning the knitted product to the wrong side, then knitting the entire row to the end.

In the next row, knit 27 stitches on the front side, leaving 4 stitches intact.

Wrap around the 28th loop and flip it over to the wrong side again. Thus, knit the entire product.

Having stopped not knitting all the loops of the corner, start knitting the main part, increasing the rows, which will make it possible to change the direction of knitting. First, knit three loops on the front side, and in subsequent rows increase the number of loops by 2, but only knitted.

Having connected the strip with the corners, on one side, dial on edge loops about 180 loops and knit with garter stitch. Then, in the next row, remove one loop every three loops. Repeat such reductions 2 more times. Then knit 5 cm in garter stitch.

After 5 cm for the main part of the hood, add evenly to 90 loops and again knit another 17 cm in garter stitch. Then select 30 loops in the center and knit only them, grabbing and knitting together - both at the beginning and at the end - 2 loops from the central part on each side. After all the center loops are connected to the side loops, close the remaining loops.

Hat with visor

Necessary:

  • 250-300 g of yarn
  • circular needles number 2.5
  • silicone visor

Description:
Cast on 80 loops, close in a circle and knit 4-6 rows with front stitch, i.e. face loops.

When I connect in a circle, I leave the tail of the thread to indicate the beginning of the row. Divide the number of loops into three parts-18pet, 44p, 18p. On 44 loops we will knit a visor, making an increase of 10 loops every 4 loops. We make an increase so that the visor lies well and fits comfortably in its pocket.
When the pocket for the visor is knitted and the reductions are made, we knit the second half of the rim.

We fold the canvas into a hit, throw the tail of the thread over the knitting face (the beginning of the row!). We knit one loop from the knitting needle, raise one and knit from the typesetting edge. We reach about the middle of the visor, insert the blank of the visor and continue to knit the loops to the end of the row, i.e. to the tail.
The top of the headband (i.e. the front) should be several rows larger than the inner (to hide the holes from the turns).

And so we have 160 loops on the needles. You can start knitting the crown. We divide the loops into 8 parts (wedges), and knit a "zigzag" pattern. One wedge-20loop. Rapport- * from 1 pet. knit 3 loops, 8 persons., 3 loops together (behind the back wall), 8 persons. * - repeat 7 more times. If you want a bigger cap, you can add 16 loops = 176 pet. One wedge - 22 loops. Rapport- * from 1pet. knit 3 loops, 9 persons., 3 loops together (behind the back wall), 9 persons. * repeat 7 more times.

We knit the desired crown height, knitting one row-pattern "zigzag", one row exactly.

The crown is ready. We begin to make the deductions. One row - "zigzag", one row - exactly.
One row - we knit only 3 loops together, and we do not make 3 loops from 1 loop, one row is exactly.

When there are 16 loops left on the needles, knit 2 loops together and pull together.
The cap is ready!

(Watch the video from the best needlewomen of the network “ tie a hat with a visor "on the YouTube channel).

Stylish hat with pompom

The size is universal.
Necessary:

  • 1 skein of yarn (75% acrylic, 25% wool; 136 m / 85 g) in three different colors: Oxford Gray (78046) - A, Steel Blue (78105) - B, Soft Teal (78209) - C;
  • knitting needles 5.5 and 6 mm;
  • auxiliary spoke.

Knitting density:
15 sts and 20 rows = 10 cm in stitch with larger knitting needles.

Legend:
K8P = remove 4 loops on the auxiliary knitting needle at work, 4 persons, then 4 loops from the auxiliary knitting needle;
K8L = remove 4 loops on the auxiliary knitting needle before work, 4 persons, then 4 persons from the auxiliary knitting needle;
+1 (add 1 loop) = pick up the loop from the broach and knit the front loop at the back. the wall.

Description:
On smaller needles with thread A, cast on 73 loops and knit 7.5 cm with an elastic band, 1 person, 1 out. Finish on the purl.

Switch to larger needles.
1st row (RS): knit with thread B 3 persons, * + 1, 2 persons, +1, 3 persons; repeat from * to end = 101 sts.

3rd row: 5 persons, * K8L, 4 persons; repeat from * to end.
4th to 10th row: start on purl and knit with front stitch (7 rows in total).
Row 11 (RS): K1, * K8P, K4; repeat from * to 4 last loops, 4 persons.
Row 13: Knit.
Rows 15 and 17: Knit with thread C, knit stitches.
from 19th to 27th row: knit with thread C and repeat from 3rd to 11th row again.
Row 28 (IS): Purl.

Apex formation:
1st row (RS): 1 persons, * 2 persons together, 3 persons; repeat from * to end = 81 loops.
2nd and all purl rows: purl loops.
3rd row: 1 persons, * 2 persons together; repeat from * to end = 61 loops.
5th row: 1 persons, * 2 persons together, 1 persons; repeat from * to end = 41 sts.
7th row: 1 persons * 2 persons together; repeat from * to end = 21 sts.

Cut off the thread, leaving a long tail. Using a needle, pull the section through the remaining loops. Pull and secure the thread. Sew a seam.

Pompon:
With thread A in 2 additions, wrap the arm about 50 times. Leave a long section. Carefully remove the skein from the roll and tie it tightly. Sew a pom-pom to the top of the hat.

Watch the video how to knit a hat with knitting needles with a pompom:

Warm double hat for the winter

Necessary:

  • circular knitting needles;
  • beloved color yarn;
  • soft yarn for lining;
  • tape measure;
  • scissors;
  • hook.

In order to knit a double hat of your size, you need to know the circumference of your own head. Determine it with a measuring tape. Write down the total and calculate the loops for the set. The standard for which you need to knit a small square using a working thread will help you to make the calculation correctly. Count the number of loops in one centimeter of the reference.

To knit the front of the hat, multiply this number by the circumference of the head in centimeters and add 4-5 stitches for the supply. For the lining, take the yarn created for knitting children's clothes. It does not inject or irritate the skin.

Description:
Type on two knitting needles, folded together, the required number of loops, pull out one of the knitting needles and start knitting an elastic band.

The most reliable is a 1x1 gum. It stretches well and retains its original appearance for a long time. After tying 5-6cm of elastic bands, start hosiery... When knitting in a circle, it is better to knit the front loops by the front thread, so they turn out to be more even.

Knit the main part of the cap with a height of about 15 cm. Then start decreasing. If you decide to knit a double hat on radial knitting needles, divide the number of loops by 4, mark each part and first knit 2 loops of each part together. In this case, if knitting is done with a set of 5 knitting needles, knit 2 loops first of each knitting needle.

After all the loops are closed, crochet the thread on the wrong side of the cap.

For the lining of the cap, dial the loops from the seamy side of the main canvas, immediately after the end of the elastic. Don't forget to subtract 4-5 stitches. Do knitting with the front satin stitch. Tie the lining 1-2 cm shorter than the main part of the cap and close it in the same way.
Wash jerseys by hand in warm water using special detergents knitted products... It is necessary to wring them out without twisting, but to dry on a terry towel in a straightened form.

Hat with ears

Size 56-57.

Necessary:

  • 150 g of yarn
  • circular needles 4 mm

Description:
For the first "ear", you need to cast on 7 loops and knit in this order: 1Krom., 1IP, 1LP, 1IP, 1LP, 1IP, 1Krom.
2nd and all purl rows - knit according to the pattern.

Once there are about 21 stitches on the needles, measure the length of the "ear".
If the length fits, then set it aside and start knitting the second.
If not, then knit the required length straight, but without adding loops.
Tie the second "ear" in the same way.

Then on circular or stocking knitting needles (you can also knit on straight lines, but then a seam will go along the back of the head, and the loops will need to be distributed taking into account this seam) dial 33 loops, add 21 loops of the first "ear", dial 33 loops again, add 21 loops of the second "ear".

Next, knit with a regular elastic band 1LP x 1IP for about 3-4 rows. See that the elastic pattern is harmoniously distributed on the new dialed loops.
Those. for the front and back of the hat, which consist of 31 loops, distribute the loops as follows:

7 elastic loops, 6 harness loops, 7 elastic loops, 6 harness loops, 7 elastic loops = 33 loops in total; for "ears", each of which consists of 21 loops, distribute the loops in this way: 6 loops of the harness, 1 PI, 6 loops of the harness, 1IP, 6 loops of the harness = 20 loops in total. Gently cut 1 loop, i.e. knit 2 loops together without ruining the pattern.

Knit straight, repeat the harness rapport according to the pattern, about 14-16 centimeters.
Then start decreasing the loops.
To do this, in every 4th row, evenly throughout the entire row, reduce:
3 times 1/4 of the total number of loops

Check the height of the hat, if it fits, then pull off the remaining loops with the end of the thread and fasten them. As a rule, the height of the cap with ears can be from 20 to 22 centimeters. Perhaps someone likes the taller one.
If the height is not enough, then knit a few more rows in height, while cutting the existing loops, and close at the end.

For the strings, attach pieces of yarn to the ends of the ears. About half as long as the desired length of the strings themselves. Take the yarn in several threads for three parts, which you then braid into a pigtail. This will be your tie, Tie a knot at the end and smooth the yarn at the bottom of the tie with scissors.
For the top of your head, make a pompom.

See the form "how to knit a hat with ears for a woman"

Winter knitted hat with lapel

Size 56-57.

Necessary

  • 150 g of yarn
  • regular needles number 5

Description:

The number of stitches should be divisible by 4, plus 2 edge stitches. If we knit on an adult, it will take about 98 loops: 96 + 2 = 98.
We collect the loops and start knitting the first row: we remove the edge loop without knitting, then the elastic 2x2: 2 front loops, 2 purl, we always knit the last loop of the row (edge) with the purl to maintain the even edges of the product. We always remove the first loop of the row without knitting.

All further rows, both purl and front, are knitted according to the pattern: 2 front loops over the front ones, 2 purl loops over the back ones.
When the required depth of the hat is reached, taking into account the lapel option you have chosen, we begin to make subtractions from the next front row: we knit the 2 purl loops together with the purl loop.

In the second row (purl) we knit according to the figure: 2 purl loops, 1 front.
In the third row, we reduce the front loops: instead of two front loops, we knit two loops together with the front one. It turns out an elastic band 1x1: 1 front loop of two front loops, 1 purl.

The fourth row - according to the picture: 1 purl loop, 1 front loop.
The fifth row (front) is knitted together in two front loops.
And the sixth, final row - all purl loops.

As you can see, the decreases when knitting a hat from a rectangle have the same principle as when knitting in a circle, only adjustments are made for the front and back rows.

When knitting a hat from a rectangle, it is better to leave the end of the thread longer so that there is enough for the back seam. We collect the remaining loops on it using a hook or a large needle, pull it into a ring and carefully sew the hat. You can connect the edges of the cap different ways(seams), this is a reason for a separate article, but the main goal in any case is to make the seam equally neatly look like with front side, and in that part of the seamy side, which, when turning off the edge of the cap, will be in plain sight. Remember this!

That's all. We confuse, cut off the excess end of the thread and go to the fitting.
Wish you interesting work and warm hats!

If you need a visual example, watch the video how tie a hat with a lapel on YouTube.

Hit of the season - hat snood

Necessary:

  • 200 g of yarn
  • circular needles number 5

First, decide on the width and length of the future product, and then tie a small piece with the one you prefer. Having chosen the fragment you like, you can count the number of loops for the product. So, cast the required number of loops on the circular knitting needles. The proposed snood must be knitted with a Polish elastic band. This knitting is not very difficult, and if this is your first knitting - do not be afraid, you will adapt quickly enough.

The resulting chain of loops must be connected in a circle and knitted.

First row: 3 front loops and one purl.

Second row: two knit stitches, one purl, and one knit stitch.

Third row: knits similarly to the first row.

Fourth row: knit in the same way as the second.
Then continue to knit cyclically. Do not forget that the wider the hat is, the more effective it can be placed on the head. |

How to video knit a hat snood ”will help beginners learn in more detail the whole process of creating such a beautiful knitted creation.

How to tie a patterned hat

Hats with a pattern look more impressive, but knitting them is much more difficult, since you need to follow both the shape of the hat and the pattern. Sometimes you get confused and have to start all over again. But if you pay attention and practice on a small sample, you will succeed the first time.

Hat with English rubber band

Necessary:

  • woolen yarn - 50 g at 135 m;
  • straight knitting needles No. 4 - 2 pcs.;
  • crochet hook;
  • scissors;
  • darning needle.

1. Find out the head circumference of the future owner of the headdress and be sure to make a small square of the knitted fabric for the sample - the knitting density is always calculated individually. When knitting a hat with an English elastic band, an elastic, almost dimensionless product is created. In the example described, with a head circumference of 55-60 cm, a knit density of 18 loops for 46 rows, 78 loops are typed for the rim of the cap. Knitting needles are used straight, medium diameter (No. 4).
You can start knitting a hat with an English elastic band without making an elastic border-rim. At the same time, you can make the fabric of the product both with a fold, and without it. Pay attention: 1x1 elastic band fixes the edge well!

2. Tie the headband in straight and purl rows, alternating between knit 2 and purl 2. When 8 rows are ready, start knitting the hat with an English elastic band. In the first row of the pattern, you will need to make uniform increases, bringing the total number of loops to 95.
To add loops, divide the row into equal sections, and in each knit with the front ones along an additional thread. To do this, grab and twist the cross threads between adjacent loops.

3. Run a fluffy fabric with an English elastic until you reach a height of 25 cm from the edge of the rim. To form the main jersey pattern, alternate the loops in the following sequence. In the first row of the pattern, do only the front ones; start the second row with an edge loop (it is removed untied); do the facial. Next, repeat the so-called double knit stitches, inserting the right knitting needle into the thread bow of the previous row. Finishing loops - front and edge.

4. Begin the third row of English elastic also with an edge loop, then alternate between double and regular knit loops until only a couple of thread arms remain on the left knitting needle. Knit the first of them with a double front, the second will be hem. Repeat the pattern over the finished sample of the second and third rows until you have made the main headdress of the desired size.

5. Start shaping the top of the hat. To round off the knitted fabric and pull it off from above, make even decrease of the loops in the straight and reverse rows: at the beginning, the edge loop; during a row of 3 thread bows are knitted together with the usual front; at the end - edging. In the next row, make decreases without leaving the hem, always knit 3 loops together.

6. Cut off the working yarn, leaving a "tail" about 10 cm long. Pull the open loops of the last row with it and pull the crochet inside the hat. Form a strong knot.

7. Turn the hat with the wrong side down, strip the knitted fabric and carefully join the side edges of the part. Sew a neat bridging seam using a darning needle and working ball thread. To keep the stitching flexible enough and the garment not deformed, do not overtighten the stitches.

Watch the video "how to tie a hat with an English elastic band"

Stylish hat with braids

Necessary:

  • 150 g of yarn
  • knitting needles number 3.5,
  • knitting needles number 4, 5

I knitted on two knitting needles, because on circular, I have a big thread and it turns out to be very tight and big holes between the loops, but I like it more tightly. Then I sewed.
I scored 96 stitches on the knitting needles. Knitting needles No. 3.5. Knitted in 2 strands, yarn with wool 20%, 135g by 50m.

Tied an elastic band 2 × 2 about 6 cm.
I switched to knitting needles number 4.5

Pattern:

  • (P2, k6, p2, k2) - repeat to end of row.
  • knit according to the pattern, where there is purl, where there are faces - faces.

Knit 6 rows in this way and in the 7th row do overlaps where there are 6 faces. (YouTube is full of videos on how to knit braids). I did this: I transfer 3 loops to a toothpick, I knit the next 3 knit stitches, I return these 3 loops from the toothpick to the left knitting needle and knit them too. Then, according to the figure, 2 purls, 2 persons, 2 purls and again overlaps. So until the end of the row.

After these overlaps, we knit 1 row on the seamy side according to the pattern, I do not count it.

And repeat all 6 rows again, in the 7th overlap
And again repeat all 6 rows and in the 7th overlap
In total, we made 3 braids. And from the beginning of knitting, they tied about 15-17 cm.

Having watched in addition the video "how to knit a hat with braids with knitting needles for a woman", you can easily master the science of knitting.

Incredibly fashionable and stylish set of a hat with a pompom and a scarf of a collar made of melange yarn. In finished form, on a hat and a scarf, a beautiful imitation of a gradient is obtained, thanks to the use of a woolen melange thread.

You will need: for a scarf-collar 250 g, for a hat 100 g of lilac mottled Emilia yarn (100% wool, 100 m / 50 g); knitting needles number 5, set of knitting needles number 5.

Scarf collar

The size: width 30 cm, girth 150 cm. Main pattern: the number of loops is a multiple of 20 + 13 + 2 chrome. Knit according to the scheme, in out. R. knit loops according to the pattern or designation. Start with 1 chrome. and loops before rapport, knit 2 rapports, end with a loop after rapport and 1 chrome. Repeat from 1st to 10th p. Knitting density. 18.5 p. And 22 p. = 10 x 10 cm.

Work description: dial 55 sts and knit with the main pattern. Through 149 cm = 328 p. close all loops from the typesetting edge. Sew the typesetting edge to the closed edge. From 9 threads, weave a braid 172 cm long and sew it as follows to the scarf: along the seam, starting from the left edge of the 2nd braid, to the strip of faces. smooth to the right edge and from there along the strip of faces. smooth around the scarf.

Beanie

Head circumference: 50-52 cm. Elastic band: alternately 1 person., 1 out. Spit from 8 p., Circular p. 1st - 16th circle. p .: persons. p. 17th circle. p.: 8 sts. cross to the right (leave 4 sts on the auxiliary knitting needle at work, 4 persons. and knit loops from the auxiliary knitting needles of the persons.) 18th - 26th circle. p .: persons. p. 27th circle. p .: 8 p. cross to the right. 28th –39th circle. p .: persons. NS.

Purl surface: in a circle. R. knit out. item Density of knitting. 15 p. And 22.5 circle. R. = 10 x 10 cm.

Work description: on the stocking needles, dial 72 points (18 points on each needle), enclose in a circle and tie 10 cm with an elastic band. Then knit as follows: * 8 p. Braids, 10 p. Wear. smooth, repeat from * 3 more times. Through 15 cm = 34 circle. R. from the elastic, knit both first sts after each braid and both last sts before each braid to reduce the width. = 64 p. Repeat these reductions 3 more times in each next round. R. = 40 p. Then in the next round. R. knit on both sides from out. p. 3 p. together persons. = 24 p. And then pull them together with a working thread. Make a pom-pom with a diameter of 12 cm and sew it to the top of the hat.


More knitting patterns:

Knitting sleeveless jackets complete with a hat

Knitted hat volumetric pattern

Knitted hat for beginners

Hat, shirt-front and mittens with knitting needles, jacquard pattern from rhombuses