Knit simple takes the needles from the melange yarn. Cap knitting knitting of melange threads, selection of yarn. Pink beret from mohair

Takes - this is a very feminine headdress, today he is again in fashion. It can be done independently, tied on spokes from any yarn. Further, in the article, consider new models of several tarts knitted with the charts and descriptions. Each model is interesting and unique in its own way, but almost all of them are executed according to one principle. First, we upset the cuff, after the beret, it goes to the extension, then for narrowing.

Each of the models presented will be given descriptions and schemes if necessary. But first a little about how to choose a material for working on a knitted take.

Choose threads and needles

It is better to choose warm, but thin thread. It must be moderately tough to hold the shape. But sometimes knitting beret is made of very soft, silky string, then it will be gently and gently fall on his head.

In most cases, takes from wool or semi-wool. Many manufacturers of knitting threads offer a different fiber composition. It is better to choose a soft with the addition of acrylic or silk, so that the thread does not ring the skin when the product is sock.

There is a large selection of the Bebi series threads by almost every manufacturer of yarn. This is a special thread for children who do not at all cause unpleasant sensations when contact with the skin, but at the same time very warm. For hats, you can use such a yarn.

Further, the article will consider the Beret model made from a subtle mohair. The mohair can be used on the basis of synthetic fiber or silk. Such a thread will be more expensive at cost, but very soft and tender.

For each beret described below, the names of the yarn from which they are connected are given. You can take in the work it is the specified threads or pick up your in accordance with.

As for the spokes, the number of this tool is usually recommended on threads for knitting and in the description of the model. But before starting work, it is worth tieting the sample and see how it will look like on certain knitting needles. Someone knits freely, someone is denser, so each craftswoman chooses the needles under his work manner.

In addition, it is necessary to connect the sample also in order to calculate the desired number of loops for a set. Sometimes it may not coincide with the description for the desired size. It all depends on the manner of knitting.

But the spokes can be associated and summer models of openwork stylish beret. For such accessories you need to use natural "summer" yarn. It is best for cotton of any time.

Now consider interesting models of taverns with descriptions.

Takes "Winter Sleep"

Very simple performed and stylish takes the "Winter Sleep" will complement the image of a girl with a sophisticated taste, gentle and romantic. The model is made of gentle woolen threads of a light shade. If you wish, you can choose any other color. In order to complete this takes on the spokes, we will need:

1. Threads Drops Alpaca from Garnstudio (Belongs to Yarn Group a) Shade 2373 to takes 100 grams of yarn.
2. Spokes number 2.5 and 3.

We proceed to the creation of a gentle and warm beret "Winter Sleep":

1. We recruit 122 or 142 loops depending on the size.
2. We make a rubber band 2 * 2 in a height of 6 centimeters.
3. Go to the spokes number 3.
4. We hide the markers of 5 pieces every 24-26 loops (depending on the size).
5. We continue to knit a handful. In places marked with markers, we make adds until the web will reach the size in 177-179 loops, respectively. After we make a recess, tieting 2 loops together in marked places until 12 loops remain on the knitting needles. We are tightened by the remaining loops, perform the seam from behind.

Takes ready. Anyone beret can be supplemented with knitted accessories from the same yarn. For example, you can execute a scarf, a shed or ancient. And also tie mittens or mitts.

Takes "Lavender Sky"

Consider a very interesting new model of beret, knitting, the scheme and the description of which are shown below. The model is called "Lavender Sky". It received such a name because of the shade of the yarn gently - lavender color and because of the pattern, resembling leaflets and petals of the spring flower. Moreover, takes it to weightless, air, soft, as it is filled from the finest mohair. But at the same time it will be pretty warm. If you wish, you can combine the mohair thread with semide or cotton. Then takes it more voluminous and dense.

To work on the lavender sky, it will be useful:

• Yarn Drops Kid-Silk from Garnstudio (Belongs to Yarn Group a) Lavender color number 11.
• Spokes circular №№ 3.5 and 2.5.

We proceed to the creation of a gentle wonderful beret:

1. We recruit № 2.5 124 (for size S-M) or 132 loops (for size L).
2. Knit rubber band 2 * 2 6 centimeters.
3. Go to the spokes number 3.5. Knit according to the above diagrams for a height of 25-27 centimeters.
4. We are tightened by the remaining loops.

It can be supplemented with a scarf or slander from the same finest and gentle yarn.

Takes "Hello Sun"

This new model of beret, knitted with spokes, schemes and description of which is given further, will be suitable for spring when he wants warmth, sun and good weather. The name of Berta, corresponding to: "Hello Sun". Takes performed in bright yellow color. If you wish, you can choose any other shade. For this pattern, orange, green, pink.

To work, you need to prepare:

• threads Drops Lima from Garnstudio shade 2923 100 grams;
• spokes circular number 3.5 and 3.

We start working on taking:

1. On Circular Spokes No. 3 We gain the necessary amount of loops. Calculate on the associated pattern and scalp.
2. We are proving 4-5 centimeters with a rubber band 2 * 2 and go to the knitting needles 3.5.
3. Knit according to the A1 scheme for its size. Schemes are given for size S / M and M / L.
4. Complete knitting by pulling the remaining loops.

You can add a set by mittles and a pellin or scarf, tied them with the same pattern from the same yarn.

Takes "Winter Angel"

Stylish and youth new model of beret, knitted with spokes with diagrams and description, is given later. This model is called "Winter Angel". It's all about the yarn. It is made of soft children's threads Drops Baby Merino from Garnstudio of a milky white shade. For work, there are circular spokes with numbers 3.5 and 2.5.

1. On the spokes number 2.5 you need to dial 120 or 126 loops depending on the size.
2. Slit a rubber band 1 * 1 3-4 centimeters. In the last row add 10-14 loops evenly. We get 130-140 loops.
3. Go to the spokes number 3.5. To associate according to the scheme A1 and after all rows are accumulated - these are the schemes, go to the A2 scheme.
4. We assign the remaining loops of 2 and the next row is the same. We tighten the loops. Takes ready.

To this, you can connect a cozy warm scarf and mittles with the same gentle angelic pattern for the kit. Schemes are given further. For a scarf, you need to dial the desired amount of loops depending on the width of the scarf, the one that you want and knit directly to the desired length of the specified pattern.

Mittenki knit as 2 rectangles whose width is equal to girth, but a length of 25-30 centimeters. First, they see several rows of gum, after the main pattern and end with a rubber band again. We perform seams. So you can get a warm gentle kit with the title "Winter Angel". For winter, knitted beret will not be very warm.

If it is planned to wear it takes precisely in the winter months, you can put it on a lining, stitched on the form of beret and in the same color from the fleece or dense knitwear. Such a lining should be sewn inside the beret and then it will warm in the winter.

Takes "Mayra"

A very interesting new model of beret, knitted with spokes with diagrams and description, is given later. This model is called "Mayra". It was performed on circular spokes No. 3.5 and 4 of the Drops Lima From Garnstudio yarn of a beautiful lavender shade with a number 4088.

Takes like this:

1. On the knitting number 3.5, you need to dial the required amount of loops (depending on size 102 or 107).
2. Knit in a circle of handling 4 centimeter.
3. After moving to the knitting needles No. 4. And knit according to the scheme below (Scheme A1). The diagram shows 1 rapport with outbreaks. Takes should consist of 14-15 repetitions of the rapport.
4. Slip the scheme to the end. 28-30 loops remain on the spokes. We make a row, tissing all the loops of 2. After another row, also to have all the loops of 2. Consider the remaining loops. Takes ready.

To do this, you can connect a scarf or a sneody using the same drawing. The scheme is further present, this is a scheme A2.

Takes with a cuff

Work on this model is divided into 2 stages. First, wait for the cuff. Knit it across, long in the girth of the head. After you make a crown. But first things first. To work, we will need:

• threads Drops Alpaca white or milk color 100 grams;
• spokes number 3.5 straight and circular;
• markers.

Begin:

1. Knit cuff. We recruit 32 loops. Knit according to the scheme starting with m2 and after m1. Knit to the desired scuffing of the head.
2. We make seams, connecting the ends of the cuff.
3. We recruit the loop cuffs on the edge of the crucible knitting needles and knit the bulk part of the beret, first making the addition. In order for them to be uniform, cling the markers at an equal distance of 5 pieces.
4. After 20 centimeters are accurate, we do in the same places of refractive.
5. When there will remain 10 loops on the spokes, we will tighten them.

Takes "Dear Mary"

The highlight of this stylish beret is not an elastic cuff, but from the rows of sweatshirt. In addition, it is decorated with wedges of petals, divergent from the center of Berth. Work on this thing is pretty simple and fascinating.

But first prepare everything you need:

• threads Drops Lima from Garnstudio Tint 4377th purple dark;
• spokes circular number 4 and 3.5.

And now proceed to work:

1. We recruit on the needles then the number of loops that is necessary for your head size. Slip several rows of boiled viscosity. Tie 5-6 centimeters.
2. After moving to the knitting needles No. 4 and knit according to the scheme. The diagram contains one report, make 6 repetitions.
3. When the pattern is accuated to the end, we pull the remaining hinges on the thread, harbor the tip inside.

That's so simple and quickly you can get a stylish headdress.

Decorative finish

Today you can decorate knitted hats with all sorts of stripes, chevron, icons. It can also be decorated to your taste. So, for example, on the edge of the baver you can sew a leather stripe with any emblem or inscription.

Metal stripes will look very interesting. They can be purchased in the sewing accessories departments.

Stylish and exquisitely, you can decorate takes, using simple wooden buttons. To do this, you can put a couple on the edge of beret on the side.

What to wear knitted takes

Recently, takes the high positions in the rating of fashionable and stylish hats. We looked at how to associate several new models of this type of headdress, and now let's discuss, with which it can be combined and wearing.

You can take the same yarn of any of these accessories to the knitted knitting needles. Moreover, it is not necessary to use the drawing from the beret, you can make a simple sweating knitting or mesh, having encouraging the Nakid.

In addition, you can wear mitts and mittens associated from the same yarn or even leggings.

Knitted beret is well suited for almost any top dress. It can be worn with jackets, down jackets, fur coat, park and cloak. Do not wear take a knitted cardigan or knitted coat. There will be a bust.

It is important to combine knitted accessories with top clothing in color. It does not necessarily mean that it takes to knit the same shade as the outerwear. Even, on the contrary, he should differ in color, but to harmonize well.

As for the summer models, the lung openwork knitted berets will be equally good and with sundresses, and with skirts, and with jeans. Any style of clothing is suitable for such an accessory.