For employees of mental labor, the need to bring the corrector from clothing the usual business. The most experienced of them know a few simple and available methods. More difficult for those who have encountered a problem for the first time.

Currently, manufacturers offer several varieties of correctors, from liquid to solid. Three of them are a threat to clothing:

  • water based;
  • based on solvents;
  • alcohol.

Each of these three varieties requires special cleaning methods:

  • the easiest way is to wash the mask on a water basis, it is enough to dangle the clothes in cold soapy water;
  • to remove a more resistant alcohol bar, you will need alcohol, vodka, acetone or ammonia.
  • get rid of the traces of the Corrector based on the solvent is more difficult, you need to purchase a special White spirit.

In most cases, the following algorithm is the following: it is necessary to wait until the stain from the corrector is dry, then process it with the selected tool and wash the machine.

Ways to remove stains

Cleaning methods are much more than three options described. Many of them are based on the use of submituers.

Water-based corrector

Fresh trail from such a smear can be tried to delete immediately. This requires a hygiene napkin, wet paper or a cloth that needs to miss the affected area. The remaining traces are eliminated by washing manually or in a typewriter.

When the stain drags, a soap solution is used:

  • part of the economic soap must be pulled into the chips;
  • chips completely dissolve in warm water;
  • soak in solution affected thing;
  • after half an hour, clothes can be wrapped in a typewriter by selecting the manufacturer recommended by the manufacturer.


Alternative to the economic soap can be its liquid analogues or suitable powder.

There is another way of wet cleaning using soap:

  1. The location with pollution is slightly moistened with water and grasp the economic soap until the foam occurs.
  2. Leave clothes in this state by a quarter of an hour until the alkali destroys the structure of the corrector.
  3. Wash the thing with your hands or launch washing in the typewriter.

It is necessary to rub clothes carefully, without applying excessive effort, trying not to go beyond the pollution site so as not to increase its area.


Alcohol

The peculiar feature of the alcohol basis is that it forms a resistant stain on clothes that dry out much faster than the water analogue. Therefore, before cleaning, you need to wait until it dries, and only then attempts to clean the evaporated thing:

  • after drying, it is necessary to remove the trace from the Corrector of the Lady Land with a Soft Abrasive Spraying or Another similar tool;
  • when the main mass of the smelting is removed, the thing needs to be decomposed on a flat and solid surface, put a light, one-photon tissue under it, which does not paint under the action of moisture;
  • clean napkin, cotton disc or cotton wand must be mixed in any alcohol-containing composition;
  • the fabric around the spot should be a little wet so that it does not grow when cleaning;
  • the processing of the evaporator area should be carried out by careful movements from the edge of the contamination to the center.

Medical or ammonia, vodka, cologne, other similar compositions can be used as an alcohol-containing liquid. The main thing is that they do not contain dyes. The final stage of the procedure is washing according to the instructions.


Solvent-based proofreader

This variation of the corrector is much more difficult to remove from the tissue, the composition not only settles outside, but also entrusted to the structure of the material, partially damaging it. To eliminate such a problem, more efficient and radical methods will be required:

  • white Spirit;
  • kerosene;
  • solvent;
  • liquid removal fluids.

Since all the estimated funds can devoid of operation on the tissue, some precautions should be observed:

  • these liquids have a sharp and resistant smell, for cleaning you need to choose a well-ventilated room;
  • the compositions can cause an allergic reaction of the skin and burns, so hands must be protected by rubber gloves;
  • increased flammability of liquids requires compliance with fire safety measures;
  • before the start of cleaning, it is recommended to check the tissue reaction to the cleaning composition: it is enough to take a small piece of the material, apply a solution on it and wait for the result.


The procedure itself is similar to the alcohol corrector described:

  • clothing lay on the table;
  • it is necessarily lined with a monochon dense leaf of a light shade;
  • clean a cotton disk or a wand from the edge to the center.

To enhance the effect contaminated by the corrector, the clothing section can be processed outside and from the inside. If the primary cleaning did not give the desired result, the procedure is repeated, but only after 15 minutes. After removing the stain, the thing is erased, first manually to remove the smell, then in the typewriter for final cleaning.

If the listed methods cause doubts about efficiency and security, it is better to ask for help in dry cleaning, this will avoid unnecessary risks and save clothing for later use.

Strike specks on clothes are a nuisance that affects both adults and children. Schoolchildren, students and office workers who use the stationery corrector on a permanent basis are especially affected. Fortunately, in almost any case, the spot can be removed from the fabric, without even spoiling it.

We study the composition

Getting rid of white Spot You need to start with the study of the composition of the corrector, which is usually written on the bottle. It is not possible to determine it is completely possible, since it is more often a secret firm. There are certain chemical compounds that are present in any corrective composition regardless of the manufacturer. These include calcium carbonate and titanium dioxide, as well as highly purified gasoline. However, the main criterion is the basis, and its composition can always be detected on the label.

There are several variations of "putty":

  • water based;
  • on alcohol basis;
  • on the oil-based;
  • on an emulsion basis.

In addition, there is a dry corrector, so in no case panic and do not use the first tool under hand. Better first disperse, with what you have. The technique will be approximately the same, but the cleansing agents are different.

Ways to remove different stains

Deciding the composition of the corrector, pick up a suitable way to remove contamination. The sooner you start cleaning, the more efficiently understand the problem. It is easiest to clean dry or a water-based corrector, the most difficult - options for oil.

Water corrector - environmentally friendly, not harmful health, safe for children and people with allergies. It does not smell and copes well with paper of any quality, and in case of drying it can be divided by ordinary water. Unfortunately, the water barbell will dry for quite a long time - up to 1 minute and does not tolerate low temperatures.

The corrector on an alcohol basis quickly dries, is capable of contained even in the cold, but, like any alcohol-containing device, is quite dangerous. With incorrect operation, it can easily ignore, also smells quite sharply, so you need to use with special care. Often, such a corrector is sold complete with a solvent based on alcohol, with which the dried solution can be reanimated.

"Mascaze" on an emulsion or oil basis combines the properties of two other varieties. It is considered the most resistant, dries quickly and has high frost resistance. Separately, a dry corrector is distinguished - this is a dry composition in the form of a tape that is in a comfortable coil. Using this stroke, you don't need to wait for it for a long time, but you will not be able to correct the mistakes and errors of small size.

In addition, there are liquid and dry "smears". The first includes correction fluids in a plastic bottle with a comfortable tassel, as well as pencils / handles, refilled by corrective fluid. Dry - rollers, inside which is placed a tightly twisted tape with a tightly applied dry composition.

Water based

To disrupt a water-based agent, you need to spend several simple manipulations:

  • first of all, dig an economic soap or washing powder in a basin with the highest possible water (strokes of this type are afraid of low temperatures);
  • soak in fluid clothes for 20-30 minutes;
  • then Stretch the thing in the machine by turning on the program suitable for this tissue type.

As you can see, remove the stationery putty will not be much difficulty. Even with black trousers, the stains will completely disappear. In addition, there is another way:

  • wet the speck of ice water;
  • then apply a few droplets on it lemon juice for 15-20 minutes;
  • then post the thing in the typewriter.

Remember that the stroke splashes are detained completely only with pre-soaking. Do not try to drop the "putty" - it is only deeper into the fibers.

Alcoholic

The essence of the elimination of such contamination is as follows: it must be twisted in the same way that the corrector is based on. If you are trying to wash with a jacket of a barcode on an alcohol basis at home, first wait for it to complete drying and, in the meantime, select an alcohol-containing agent. Then neatly try to scrape the paint from the clothes mechanically: a sawmill with a soft abrasive spraying, an old toothbrush or some stupid item.

Spread the thing on a flat surface, putting a clean unknown cotton cloth or a few paper towels under the wrong side. It is important that the lining does not lein. Strike residues wipe with soft surface movements with a rut or a cloth moistened in ethyl or denatured alcohol, alcohol-based alcohol or vodka. Such an action can be repeated twice. Complete the procedure with the usual procedure in washing machine.

You can also quickly remove pollution, for example, with trousers, if you wash clothes in warm water, into which the ammonia alcohol is added.

Do not forget to pre-process the surface of the pants with ammonia solution and put the flutter-soaked mill for 10-15 minutes.

In some cases, the varnish removal fluid will help. The dense material used for the manufacture of jeans can be tried using the use of purified gasoline that can be bought in the store. Watch the mob, hold on the spot for 2-3 minutes, and then send a thing into a washing machine.

Oil

Wanting to extort the corrector on an oil or emulsion basis, prepare clean cloth, cotton wool and solvent - kerosene, acetone, white spirit. Oil is poorly cleaning, so you have to use chemicals. To begin with, check the solution on the seams. If the tissues do not lose colors and are not deformed, then you can proceed to the processing of a contaminated surface.

The space around the contamination wet with water - so, the spot will not spread and retain their borders. Double-finish with a solvent with a cotton wand with the methodical movements: from the edges to the center. And for the third time - with invented side. Do not rub the solvent in the material!Then post the product in a typewriter using a liquid powder in a combination with air conditioning for linen. Do not forget to ventive clothes.

If the solvent spoils the fabric, then it is better to turn to professionals and attribute to dry cleaning. You can also try to treat the surface with a solution from water and ammona alcohol (2 to 1 ratio). There is a chance that the usual means for washing dishes will help - apply it to a moistened area, leave an hour, and then do, following the usual algorithm.

In the same way, a solvent-based corrector can be eliminated. The only difference is It is better to handle a stain from the wrong side. In addition, faced with this kind of "Masmazka", soak clothes in warm water for half an hour, then add a stain pressure there and put it manually. Follow the algorithm described above.

Dry

To drop a dry ribbon corrector, do the same as in a water-based troop situation. Soak things in a soap solution for 40 minutes, and then wrap in the typewriter on a delicate mode. The tape will quickly splash and quickly go away from the clothes, then will remain minimal processing.

If you wish, wipe the thing to wipe the thing to the brush. After the washing machine, there will be no trace from the corrector.

  • do not even try to independently remove the corrector from delicate fabrics, such as silk, wool, atlas, velvet (and other dilated samples). In case of failure, you just lose things, so refuse independent experiments;
  • if the proofreader is liquid, then you first need to absorb the surplus with a dry or damp cloth, and then wait for its complete drying;
  • to pump clothes better for 10-15 minutes in water temperature;
  • do not try the corrector until it finally dries. So, you, on the contrary, deeper the "promote" substance in the material. In addition, the pollution area will increase;
  • try to process fabric from the wrong side, especially if you work with a solvent;
  • at the end of the procedure, be sure to dry the thing in a well ventilated place;

  • if the durability of the tissue causes doubts, then test drives on a hidden section, for example, seams, or on a fragment of a similar material;
  • the fresh pollution, the easier it will cope with it;
  • cleansing the corrector, try to abandon the use of water high temperatures. Boiling water will only aggravate the situation - the corrector will "be wound", so it will be almost impossible not to eliminate;
  • do not use bleach and stains;
  • little specks clean with cotton wands, not with discs or tissue flaps;
  • the means that are used for the "dilution" of the dried stroke can be used to eliminate stains from clothing. Apply them according to the instructions. However, do not risk with thin and delicate tissues;
  • pure acetone applies in cases of absolutely white things;
  • water for washing can not be very hot, but the "drum" turnover is better to put high;
How to wash the corrector from clothes

Srich-corrector - this special toolDesigned to correct errors in the text, especially popular among students and students. However, there are often situations when the corrective liquid is dirty clothes or other things. This can occur if you have not fully spinning the fluid cover, as well as the embarrassing movement, brought the bubble from the table. In addition, you can accidentally get dirty and dry corrector in the form of a tape. However, the resulting stain on clothes can be removed.

What to do if there is a stain from the barcode
In no case do not throw out the corrector. Familiarize yourself with the composition of the corrective fluid.
You need to determine how type the barcorrotor belongs to. Means for correcting errors in the text can be made on aquatic, emulsion, alcohol basis, and dry proofreaders are also represented on the market.
Having defined the type of corrector, start acting immediately. The sooner you join the "struggle" with a stain, the more effective you will delete pollution from clothes.
Your clothing cleaning actions will depend on the type of corrector.

Removing contaminants from clothing depending on the type of barcode

Water-based corrector. If you were stained with a water-based proofreader, then consider you lucky. This type of corrective fluid easily departs from clothes. It is possible to clean the stain in the usual way: to dug a thing for a while (for 20-30 minutes) in cold soapy water, and then wash the machine in accordance with the mode suitable for this tissue. Spot will be easily easily and easily.
Corrector on alcohol or emulsion basis. With a stot from the corrector on an alcohol basis, you will have to "play". Wait until the corrector gets up on clothes. Try to carefully clear the part of the dried corrector. The remaining pollution must be removed using a cotton swab dipped in cologne, tonic or vodka. After that, post the thing in the car according to the temperature regime.
Solvent-based proofreader. It is harder to remove the stain from the solvent-based barcode. To get rid of pollution, you will need a piece of pure fabric; cotton swabs; As well as solvent, White-alcohol, lacquer removal fluid (any of the options). Remove the product on the wrong side. Route clean cloth on facial Products to protect the thing from the action of the solvent. Carefully treat the contamination with a cotton disk moistened in a solvent, moving from the edges of the spots to the center. To avoid unpleasant consequences, try the action of the solvent on the inner seams of the product. If the thing is not deformed, the paint is not washed away, then you can safely start cleaning. At the end, post the thing in the car in the usual way.
Be careful! If you notice that the application of the solvent spoils the fabric, do not clean the thing alone. Be sure to contact dry cleaning. In no case should not be washed with clothes. No dry cleaning will give you a guarantee that the stain from the barcorrotor will be deleted after you put the thing. The action of water and powder can lead to the fact that with his beloved clothes will have to spread apart forever.
Solid barcor. To wash the stain from the tape-corrector will not be difficult. Soak the thing in cold soapy water for a while (40-60 minutes). Then carefully remove the tape. Fold the thing on a delicate wash mode in the car.
Removal of stains from the barcorrector on clothing depends on both the type of corrector and the type of fabric. Of all the types, spots are most easily dismissed from a water-based barcode and a corrector tape. It is most difficult to wash pollution from delicate fabrics: velvet, silk, wool. Such "delicate" things are better to immediately pass into the dry cleaning, in no case pre-causing.

Office workers and parents of schoolchildren are familiar with the problem of appearing on the clothes of traces from stationery. One of those required tools is a corrective fluid, called the corrector. With it, it is easy to make corrections to the written text or a picture. But such a useful thing sometimes causes damage to expensive things. Since it is not necessary to part with your favorite things at all, it is important to figure out how to wash the corrector from clothes. To do this, it is enough to listen to the advice of the same orders.

To successfully cope with the stain, you must act immediately. If you leave it for a few days, remove pollution will be much more complicated. It must be followed by the rules:

  1. The proofreader, which has been everything, can not be thrown away. Careful study of the instructions or just stickers on the jar will determine its type;
  2. After determining the type of the corrector, you must select the method of cleaning;
  3. You need to start processing immediately after the stain identification.

When choosing a purification method, it is important to consider the type of fabric. If products from velvet, silk, or velor, not recommended cleaning at home. It is better to refer to the specialists of dry cleaning. If we are talking about more persistent chemical and physical influences of tissues, you can try to cope with your own.

Many want to know how the putty is abandoned with ordinary powder. It depends on the type of corrective fluid. There are three main types of corrector, which are commonly used in everyday life:

  • On the basis of alcohol;
  • Emulsion;
  • Water based.

The simplest for cleaning is considered a waters-based liquid.Before bringing a putty from clothes, you can try to freeze stain. To do this, it is necessary to put a thing in the freezer of the chamber for about half an hour.

In most cases, the substance itself will begin to crack and peel into small parties. In this case, it is only necessary to handle the surface with a dry brush. If the expected effect failed to get, you can try to freeze the thing again.

In cases where this method did not bring the result, it is necessary to use others. This usually indicates a more complex composition of the means, which is resistant to low temperatures. Emulsion
Water based
Based on alcohol

Ways to remove stains

Fresh traces of corrective fluid on clothing can be simply erased. For this, the usual wet napkin, which is practically in all female purse. At the same time, it is important to observe the rule: move from the edges to the central part of the stain. If there was no wet napkin, you can use a paper handkerchief.When processing delicate tissues, it is recommended to turn out the product inside out before rubing pollution from the corrector.

Water based

This magazine is considered the most environmentally, since water acts in it as a solvent. Such a drying fluid is simply diluted with water and continues to be used in direct intended. She dries longer, which can play on his hand the owner of the evained clothing.

What to bring the corrector from clothes if it is water based? There are several methods of getting rid of stains:

  1. Standard machine wash with soaking. For this, before cleaning the surface of clothing from the stroke, the thing needs to be soaked in cold water with soap dissolved in it. So that the cleansing agent affects, it is necessary to leave the product in the solution for half an hour. After that, the processed thing must be sent to the washing machine. When choosing a wash mode, you need to repel on the degree of contamination and the type of fabric;
  2. Washing with pre-processing. Remove the stain from the corrector from the clothes, it is possible to join the thing under running water. For such a washing, it is necessary to use a household soap.

What is laundering a water-based corrector if a slight spot? It is enough to add a laundry powder with hot water and wash the product.


 Machine wash
Economic soap Washing powder

Alcohol

Alcohol proofreaders are characterized by speed drying and a sharp smell. How to wash off the corrector at home, if it consists of water and alcohol?

How to bring the spot from the corrector on clothes if it is on an emulsion basis? Such pollution is the most difficult. Since such corrective maps are raubulars, before displaying the bar, you need to prepare everything you need for the processing process:

  • Cleansing chemical;
  • Cotton disk either tampon;
  • Clean white fabric;
  • Napkin.

All this will allow without a separation from the process to perform all stages of cleaning.If the alcohol corrector fell on the clothes, you need to act quickly. Well cleanses clothes from the smear denatured alcohol. To do this, you need to carry out the following manipulations:

  1. Gauze folded in several layers or white cotton fabric It should be attached to a polluted place;
  2. Then treated with a cotton disk, moistened in alcohol, stain on the front surface;
  3. After cleaning, the product should be carefully rinsed in clean water;
  4. Then you need to hang the thing to be dried by naturally.

What to lick the stationery putty? Oil or emulsion proofreaders can be removed by the following substances:

  • Kerosene;
  • White spirit;
  • Alcohol (methylated);
  • Solution of ammonic alcohol;
  • Acetone (or any liquid for lacquer removal);
  • Solvent used to dilute paint.

Gasoline is effective, but he leaves a resistant smell on clothes, which is difficult to get rid of. After processing, you have to wash the thing several times to remove the obsessive smell. Only the purified type of gasoline is used. It is purchased in stores, not at gas stations.

With the contamination of things with such a proofreader, they cannot be erased or soak. Instead, you need to clean the dried residues with a brush, and then apply a means to remove spots from the inside. Before removing the stain from the stroke, it is better to put a white tissue under the surface.

Whatever the solvent is chosen to bring the spot from the corrector on clothing, you should act according to the following scheme:

  1. On the polluted area you need to apply a few drops of a chemical agent and distribute it with a cotton wand;
  2. Throw away the time and after 15 minutes proceed to processing;
  3. Then mix your cotton disk in the liquid and read by neat movements stain from the edges to the center;
  4. After that, the stain is necessary to laugh with a paper towel or a napkin and send a thing to a washing machine.

Before applying any cleansing agent, it is necessary to check it on the fabric. To do this, it is enough to apply a small amount on the seam or other imperceptible part of the product.

The alcohol corrector is quite difficult to cleaner. Before you wash the clothes with clothes, it is best to get sick, and then try to remove the brush. If everything is not gone all the stain, you can try to wash the mask with a tampon, moistened in a cosmetic tonic, cologne or vodka. The cleaned thing should be installed in the machine to secure the result. Acetone
Solvent
Kerosene
Ammonia
White Spirit

Based on solvent

Solvent-based proofreaders are usually produced as pencils or original handles. Due to the unique composition, they can be appreciated as accurately and fine.

Before removing the stain from the corrector from the clothes, you need to select the tool and try it on an invisible piece of clothing.Next, you should step by step to clean the annoying spot:

  1. To begin with, it is important to determine the substance used:
    • On standard tissues can be applied different kinds chemical substances;
    • If the fabric is dense, kerosene can be used or purified gasoline;
    • Thin fabrics are better not to handle themselves.
  2. If the stain appeared for a long time, we clean the corrector with the help of an old dental or soft clothing brush. In many cases, most of the stain is removed;
  3. The product must be turned inside out and put fabric under the contaminated place;
  4. Then cotton swab or disk moisten in the cleaner. If only small splashes splashes on the fabric, it is enough to take a cotton wand and with its help gently treat low-wing traces from splashes;
  5. After the most contaminated place is purified, the thing should be wrapped in soap solution or using high-quality powder.

Barcorrector

A separate group of dry corrector is roller mappings. They are a twisted tape placed in a plastic case. It is applied by pressing the Roller on paper. Chemical composition Provides good coating. However, with careless handling of the stationery, you can stick to the ribbon on clothes. In this case, the problem arises: how to wash the adhesive strip of white frozen liquid. A solid corrector is removed simply:

  1. Thing soam in soapy water for 40-60 minutes. When soaking water should be cool;
  2. Then carefully remove the bar from clothes. If it is removed with a ribbon, it will be enough to wash the product in the car, exposing a delicate mode, and forget about the problem.

A particularly serious problem is the inspired corrector. It is difficult to eliminate. And above, the listed methods can be absolutely ineffective. In these cases, it is worth using special ways of exposure to complex stains.

Application of nail files:

  1. Before removing the stain of the corrector, the product must be decomposed on the solid surface;
  2. To put a piece of fabric under it, which will absorb excessive moisture and will not allow expansion of the area of \u200b\u200bpollution;
  3. Moisten a cotton disk in the alcohol-containing substance and wipe it stain;
  4. The resulting divorces can be eliminated by washing. For her, you need to choose a liquid powder connected to the air conditioner;
  5. The thing itself should be dried in a ventilated room. For drying it is not recommended to use heating appliances, as the smell will continue, the quality of the fabric can be spoiled.

Chemical processing. If it is necessary to remove the more difficult stain from the smelting, you will need chemistry. The following cleaning materials are suitable as cleansing substances:

  • Solvent;
  • Nail polish remover;
  • Acetone.

To remove the smelting, only the upper layer of the tissue is sufficient. A more thorough formulation leads to a deeper damage to the product. The cleansing agent itself is necessary to wash off with clean water.

The use of specialized funds. If the standard options for recipes than to bring the corrector from clothing, do not help, in some cases it is possible to use specialized stains. However, after their application, it is necessary to quickly and thoroughly wash the thing. Since manufacturers offer a wide range of different means, it is necessary to select it under each case, given the possibility of using a cleaner on a tissue or another.

  1. If a chemical substance is used as a cleaning agent (acetone or gasoline) is used, it is impossible to rub it into the tissue, since the fibers are damaged. In this case, you need to accurately apply a means to a pollutable surface;
  2. To prevent spreading substances and prevent further wagging on the fabric, it is necessary to put a clean unnecessary piece of fabric under the item. It is also recommended to wet the area around the spot so that the solvent does not apply to the large area;
  3. If the corrector managed to dry up to handle, it can be turned on to cut off the nail file, and only after that it began to get rid of putty on clothes;
  4. Delicate either thin fabrics It is processed only from the wrong side. In this case, the likelihood of the appearance of new spots on the front side is minimized;
  5. It is impossible to allow a long stay of solvents or other chemicals on the surface of the fabric. As soon as pollution is eliminated, remnants of funds need to be immediately removed;
  6. In the absence of any solvents at hand, you can use alcohol. It is important that it is transparent. Applying brandy or Navy is prohibited, as they leave spots and exacerbate the situation. Such a method is applicable to important meetings when the time to wipe off the clothes from the corrector is simply no;
  7. When washing, water should not be too hot. But the mode is better to choose with maximum turns, so that the remnants of the fund used are better shaped;
  8. Before lining the bar with clothes, you need to think about several times. After detection fresh spots It is impossible to try to smear it, as this will lead to a deeper penetration of the substance in the fibers of the fabric;
  9. Cannot be used to purify perfume and toilet water. They have insufficient alcohol content to eliminate pollution, however, essential oilsIncluded, leave a strong smell. Get rid of him then very difficult;
  10. To minimize the likelihood of barcode contamination, it is recommended to purchase models with a transparent case. In this case, you can promptly notice the break feed or its twisting.

Do not avoid the use of ready-made means to remove the stain from the smelting. Those who constantly use corrective maps is recommended to purchase a special means to eliminate such spots. It is sold there, where and the corrector itself. The medium provides instructions for its use. The most famous option of the cleaner is "antištri". This is a liquid, which in the shortest possible time allows you to get rid of stains on almost any fabric. It is applied as follows:

  1. The resulting contamination is slightly dry;
  2. The field is cleaned by dry cleaning;
  3. A tool is applied to the contaminated surface;
  4. Then the purified place should be blown into a clean napkin;
  5. After that, the fabric is left to dry;
  6. If necessary, the cleaning process can be repeated.

Timely detection and cleaning of clothes from stains adjusting putty will save a thing in proper form. And the use of gentle means will eliminate annoying mistakes without harm to external view Clothing and structures of fiber material.

Video

How to wash the mask with clothes - a question often arising from students.

The barcode is a special purpose that allows you to correct errors in the written text. This tool is very popular among students. Very often there are situations when a bubble with a corrective fluid as a result of a careless movement overturns to clothing. You can also get dirty with a dry proofreader in the form of a tape. Students and students applying the corrector should be remembered that the blemishes to be cleaned after entering the liquid to clean.

Students and students applying the corrector should be remembered that the blemishaded after entering the liquid on clothes is cleaned by cleaning

Therefore, those people who actively apply this tool should be aware of how to wash the stationery crawl from clothes.

To decide how to wash the dressing corrector from clothing, and at what moment it is best to clean, you need to know the types of existing proofreaders and what type of the corrector was contaminated for clothing.

Know the type of stationery putty need to accurately determine how to wash the magazine-corrector from clothes

On a note! Know the type of stationery putty is needed to accurately determine how to wash the magazine-corrector from clothing.

Before deciding with the answer, how to wash the dressing from the clothes, you need to study the types of existing mascara compositions. To date, there are the following types of proofreaders, characterized by the basis.

Before you decide on the answer, how to wash the dressing with clothes, you need to study the types of existing mascara compositions

The base of the smelting can be:

  • one;
  • alcoholic;
  • emulsion.

The easiest way is to remove the spot formed on the stuff after entering it on the basis of water, and the most difficult is the removal of the spot formed from the emulsion composition.

To simplify work with corrective fluids today, handles proofreaders are manufactured. These handles are most often refilled with liquids on an alcohol and emulsion basis. The principle of such a device is similar to that applied in a conventional handle. When pressed on the tip, there is a liberation of some space in which the correction fluid flows.

The probability of pollution is minimized, it occurs only if the mechanical destruction of the corructor housing occurs

The probability of pollution is minimized, it occurs only if the mechanical destruction of the corructor housing occurs. Mechanical destruction of the shooting handle can occur, for example, when riding a schoolboy on a backpack with a snow slide.

Removal of water-based corrective

Corrective fluid having a water base is removed from the surface of the clothing much easier compared to other compositions. Such proofreaders are advised to purchase for schoolchildren. Before buying a device, it is necessary to study the composition of the liquid refilled in it. Very often, schoolchildren's moms are wondering than you can wash a water-based madness from clothes. The magazine of the water-based corrector is easily removed using the household soap with further wash.

Economic soap when removing corrective maps

The contamination removal procedure is as follows:

  1. You should take a piece of economic soap, wet it and graze the surface of the clothes on a contaminated area, in a mixture of it.
  2. After the site is copiously sulky soap, it should be left in a wet state for 10-15 minutes. It is necessary that the components of the economic soap destroyed the components that are included in the magazine. During this period, the thing should not be immersed in water.
  3. After exposure to the exposure, the contaminated thing should be wrapped in the usual way in a pelvis or washing machine. In the process of washing, it should be used detergentrecommended for use by the manufacturer of clothing.

A water-based corrector easily departs from the fabric under the influence of economic soap.

Washing clothes B. washing machine

Important! In the process of using a piece of soap, a contaminated area should be rubbed with caution so as not to increase the area of \u200b\u200bpollution.

Features of the process of cleaning clothes from alcohol-containing maps

A corrector having an alcohol base is the second most popular, therefore many people using this device causing how to wash the dressing on an alcohol basis from home clothing.

Alcohol when removing adjusting maps

The feature of the liquid for alcohol correction is the presence unpleasant odor. Such proofreaders are not recommended to acquire for schoolchildren, since it is undesirable to breathe a pair of correction fluid. In addition, the alcohol composition is much more difficult to remove from the surface of the clothing. Most often, this type of composition is acquired by organizations and institutions for stationery needs. This type of corrector dries out when applied to paper much faster than water-based composition.

Pilot for nails when removing adjusting maps

To the question, is it possible to wash the smelt on alcohol from clothes, the answer is affirmative. But at the same time a person should be greatly patient. If the liquid hit, clothing can not be rubbed until the liquid dry fails.

After the composition is dry, it should be carefully cleaned with the help of the lady's nail file. This action will warn the flamement of stains when water or other liquid appeals.

Cologne when removing corrective maps

The next stage of cleaning things from pollution is painstaking homework over the stain.

For further work to remove contamination, it is necessary to put a thing on a solid surface, pre-stuck it with a nervous rag or towel.

In order to do not spoil the cloth around the spot in the process of removing pollution, it should be poisoned clean waterThis should be captured in the processing process 1-2 cm of pure fabric around the perimeter from the border of the spot.

After wetting the area of \u200b\u200bcontamination, the fluid should be applied to the stain, which includes alcohol. Such liquids can be:

  • directly alcohol;
  • vodka;

  • cologne;
  • toilet water, etc.

Processing a contaminated area should be carried out from the edge of the pollution to its center. This will prevent the spread of pollution into a large area.

Removal of the corrective composition made on an emulsion basis

If a corrector gets on an emulsion-based on clotum cloth, to remove it, you should use a special chemical station, which is designed specifically for this purpose. Emulsion-based corrector is paint. Therefore, to remove it, you can use recipes designed to remove paints on an emulsion basis.

Summer alcohol when removing the corrective composition

Most. simple way The removal of contamination is the use of a solution consisting of water and ammonia, in a 2: 1 ratio. After processing the place of contamination, the stain should be lost and after 10-15 minutes, rinse well with water. After the thing should be wrapped in the usual way using the usual washing powder. It should be remembered that in the application process arises nasty smell Ammonia. However, it should be noted that almost any means to eliminate such complex pollution has an unpleasant odor.

Acetone for the preparation of the emulsion base

If it still failed to withdraw a pollutant spot from the surface of the clothing with the solution of the ammonic alcohol solution, then more radical methods will have to apply. For this purpose, some funds from household chemicals can be applied. The disadvantages of the use of radical methods are the high probability of damage. In order to avoid it, before using any radical agent, it should be experienced on a small plot that will not be noticeable when socking things.

White spirit for cooking emulsion base

As radical compositions that can be used to remove the corrective fluid on an emulsion basis may be:

  • acetone;
  • white Spirit;
  • solvents;
  • kerosene and some others.

Since all these chemical extensions have a high degree of flammability, then when working with them, fire safety rules should be followed.