I will show you how to fold such interesting paper masks with your own hands (Mask Guy Fox). You will need two things: 1. Paper square, black on one side, white - on the other. 2. Some experience in the Origami technique
Step 1. Beginning
a) Starting in the black side at the top, take two rabbit ear.
C) Remove the hidden angle.
E) break.
a) Bend the bottom valve so that the resulting valve has one vertical edge, one horizontal edge, and one edge, aligned with the edge behind.
B) Turn the valve to the left
C) pull the hidden edge
D) as here
G) like this will look like
Step 3. Nose
a) fold the upper point to the widest part of the rhomatic valve
C) break the valve
E) it will look like this
Square valves
Step 4. Eyes
a) Upstairs, beat two corners
Paper masks do it yourself by origami technique
I will show you how to fold such interesting paper masks with your own hands (Mask Guy Fox). You will need two things: 1. Paper square, black on one side, white - on the other. 2. Some experience in the Origami technique
Given all the above, let's start.
Creating paper masks do it yourself
Step 1. Beginning
A) Starting in the black side at the top, take two rabbit ear.
B) This is called "Fish Basis". Fold.
C) Remove the hidden angle.
T) Repeat the action "B" and "B" on the left side.
D) Bend so that the bottom point is to combine with the top of the square.
E) break.
Step 2. Tip: Look at the next step to understand what to do in the current step
A) Bend the bottom valve so that the resulting valve has one vertical edge, one horizontal edge, and one edge, aligned with the edge behind.
B) Turn the valve to the left
C) pull the hidden edge
D) as here
E) press the fold of the triangular valve
E) petals bend the angle down
G) like this will look like
Step 3. Nose
A) fold the upper point to the widest part of the rhomatic valve
B) Begin to the top of the valve, the fold line coincides with the edge of the square valves
C) break the valve
D) laid the fold on the top inside
E) it will look like this
E) partially remove the top and form the "Rabbit Ear"
G) like this. The triangle of the nose must downstairs
Square valves
Step 4. Eyes
A) Upstairs, beat two corners
B) Bend the eyes on the dotted line, it will slightly pull the edge of the valve above them.
C) partially drown folded folds ...
D) ... so that the lower eyelid repeated the upper eyelid. This will require an end in the corner of the right.
E) it turns out like this. Repeat on the left side
Step 5.
a) Beg the internal corners of eyebrows outside
B) Beat a small tip down
C) it turns out like this
D) Generate the regions of the nostril and the tip of the nose inside
E) like this
Step 6. Beard
a) (concentrate on the bottom), bend two upper angle outward, exposing black
B) Generate two lower edges inside, opening a little black in the shape of a tie
C) Make light folds on two valves so that it turns out a small letter V.
D) there will be a smile, like this
E) here is such a smile as I did here
Step 7. Mustache
a) lay the fold on the sides of the mustache so that the mustache bend horizontally
B) Generate a little edge, exposing black color
C) like this. Almost done!
Step 8.
a) Generate "cheeks" to the sides
B) Generate small folds on the forehead and on the chin, tighten a little eyebrows to seem some black paper, and the eyes of a little opened with a cunning expression. Make small wrinkles near the eye.
C) Continue to form a person until it becomes looking like a V-shaped mask. Feel free to make changes and improvise.
Technique: origami
1.
At one of the pages of my blog http://stranamasterov.ru/node/117588 you have already seen photos with masks. At the request, I exhibit the master class. Masks are folded according to the book of Sokolova S. Fairy Tales and Masks. - SPb.: Diamant LLP, Valeri SPb CJSC, 1997. - 224 s., Il. The masks proposed by the author are very simple in manufacture, convenient for storage, because After use, they can be disassembled into parts modules.
The mask's base is the details connected to the ring, we will call them modules. Modules are folded from squares made from A4 format. Consider ways of manufacturing modules.
Module number 1. Note on the square two diagonals. Bend two opposite corners to the center of the workpiece. Turn over to the other side.
The top and bottom side of the workpiece bend to the central horizontal, pulling the triangles that are from behind, outward.
Module №1 Ready!
Module number 2. Fold module No. 1. Lower straight angle lift to the center.
This is a module number 2.
Module number 3. Turn the module number 1. Bend upper and lower corners to the workpiece.
Module number 3 ready.
Module №4. Fold to the center of the workpiece two opposite angles of the square. The upper and lower sides bend to the central horizontal.
This is Module No. 4.
Module number%. Fold module No. 1. Upper and bottom corners bend inside the workpiece.
This is Module No. 5.
Module No. 6. Bend angle to the workpiece.
Like this. Turn over to the other side.
Fold the lower side to the central horizontal, while the triangle, located on the other side, goes on the front side.
The upper angle is combined with the bottom angle.
Module No. 6.
And so, we met with modules. We will make masks!
BEAR.
Fold module number 3. It will be a fruit bear. Choose the paper yourself. There are not only white and brown bears in Origami, but also blue, green, pink and even orange! So, choosing a color is yours!
For the ear it is necessary to take a square with a side of 7cm. Fold the basic form " Kite".
Bend straight angle and turn the workpiece. This ear.
Make 2 ear and glue the back of the face, i.e. to module №3. Eye and nose can be made by appliqué.
You can glue "glare" in the eyes.
You can glue plastic eyes.
Or such eyes - they are smaller. Spacious fantasy!
FROG. Make a module No. 5, the upper and lower corners of which bend not inside, and back.
Eyes can be folded from small squares with a side of 7.5 cm. To make two opposite angle to the center, the top corner is slightly lowering down, turn the workpiece.
On the semi-lines stick violet or black semi-souls. These billets paste on both eyes.
Eyes glue from behind module №5.
In pupils, you can glue "glare".
Fold three modules No. 4, they are on the photo are white. But for the frog, they should be, of course, greens. I made white so that you can see how they are connected to each other. Modules No. 4 insert on both sides in the frog mural module. Connect all the base modules in the ring.
We connect them in the center of the face.
It turns out like this! You can put down.
Well, glue your mouth. Here is a frog! Of course, you can dream and make, for example, cilia, a bow - there will be a frog-girl! ..
ELEPHANT. Not sure, of course, that my elephant looks like an elephant, but what paper was at hand, from that and did ...
Fold module number 3.
From a square of 18.5x18.5 cm in size to fold the basic form "Air Snakes".
Bend a little lower corner.
Fold the side sides of the workpiece to the central vertical line. Turn over the workpiece.
This is a trunk.
For ears you will need squares with a side of 15 cm. Fold the basic form of "air snakes". The upper and lower corners are connected as shown in the photo. Turn over.
Fold three modules No. 4. Two modules connect with an elephant's face.
Glue trunk and ears. Ears glue slightly under the tilt.
Each ear round, bend the sticking corner from myself.
Printe an applicative eye.
I make "glare."
You can make ears. Like this!
Or so! Or, how do you think!
Mouse. The mouse is done very quickly and easily!
Fold from the square module No. 2, the lower angle of which to bend a little up. It will be a mord of the mouse.
From the square 8x8cm to fold the base form "Air Snakes". Lower the straight angle down, as shown in the photo. Make two of your billets. Turn over. This is the ears.
Applicatively make eyes and nose mouse. Glue ears to the head. Make three module No. 4 from squares. Connect them from the head of the mouse, as the frog joined the mask. Third module No. 4 to connect to the ring. Mask is ready!
Pinocchio.
Module No. 1 will face Pinocchio. Bend the lower corner of the main module back, while the fold should perform above the bottom side of the module about 1 cm.
Bend a bit back of the lower side corners, as County Pinocchio.
From the square 8.5x8.5 cm fold the base form "Air Snakes".
Deploy the workpiece to the square. Top straight angle to mentally divide into three equal parts, bend the line "Valley". It will be nose.
Lower the "nose" by a straight angle inside the head module.
Bend the nose for the already scheduled lines of the "Air Snake" fibers "Mountain", omit nose.
You can put down so that triangles do not diverge.
The red square 15x15 cm bend down just as folded the nose, sharing a straight angle into three parts. Hoall the bottom triangle up.
Triangle hide inside the cap.
Like this! And turn the workpiece.
Wear a cap on the top triangle of the main module. Sleep.
FROM 4X4 CH FROM THE BASIC FORM "AIR CMER".
Connect upper and bottom corners. Turnover turning over and glue to the cap.
To the cap glue a few white strips of 2 cm wide, uniformly alternating red and white color. Put a few brown strips with a width of 0.5-0.7 cm, which will be cheek. Glue eyes. And here he is Pinocchio! You can see Pinocchio here http://stranamasterov.ru/node/118666#comment-1039720. He has cilia, another mouth and cap in yellow stripe! Your Pinocchio will be undoubtedly more beautiful!
Eyes can be placed closer further from each other. As a mask of this Pinocchio we do not use, because The cap is greatly outweigh. I felt the right and left of the back of the head, forming oval head, and the portrait of Pinocchio. But, if you want a mask, you can rearly glue a cardboard in the form of a mask and then the cap will be kept and will not be overtaken and fall.
If desired, the author of this book offers miniature masks (all sizes 1: 2) decorate the Christmas tree, hanging them on the branches of the forest beauty.
I wish everyone to use my MK, successful theatrical ideas with masks!
W!!! The longest thing is my master class! I hope that I did not in vain, and someone will come in handy!
Which of us in childhood did not want to do something beautiful on the birthday of Mom or please unusual gift Pope on a male holiday? And every time in order to create something beautiful with her own hands, it was enough just to look at the world differently and learn how to creatively think.
And unfortunately, not always enough of the imagination required for this to create a real work of art. Moreover, at hand, then there was no such useful thing as the Internet. When to create enough everything is just to look at the appropriate site. And it is the most creative children from their children's experiments over time they grew into the creators creating from ordinary simple Materials Real works of art. And then it will be about them.
Paper animal masks from Flurry and Salk
What is needed to create a beautiful mask? Some paper, scissors, glue and patience mass. Usually so created simple images Animals, about which everyone is known since kindergarten. However, sometimes to transform such a simple mask in a luxury item, it is enough to approach non-standard and as a result we will get such a masterpiece, like Emmy Fleur and Nikki Luck.
However, for this they had long hours to sit on each mask, since otherwise it is simply impossible to create such a masterpiece, one of the paper losks in which, is under a thousand pieces.
And such patience over time gives striking results. A vivid example of what the works of Emmy Fleur and Nikki Luck, whose bright imagination made it possible to create new innovative collections and conquer the world of fashion.
Now these two girls are already engaged in creativity under the Paper-Cut-Project brand, drawing up showcases, interiors and creating crafts from paper to order. And now most of their customers are the largest luxury stores that are not abruptly abrupt sculptures of paper. And it all started with the usual applique of paper.
Masks of animals with a three-dimensional effect from MLLEHIPOLYTE
And the next beautiful craft From paper managed to create a French artist and decorator, which works under the pseudonym Madmoiselle Ippolit. It was his unusual look at Origami allowed to create three-dimensional paper masks of animals. These volumetric beautifully folded masks can be called just in one word - masterpieces.
The artist step by step skillfully folds layers of paper, creating a rich texture that resembles a fur or animal skin. At the same time, the skillful choosing of paper strips with additional colors allows you to create a sense of the depth of the mask. This is all achieved by ordinary origami technique and the author's unchanged creative thinking.
As a result, he comes out bizarre carnival maskswho are not ashamed to wear even on an expensive secular Rout. Next, you can make sure in the master's masterpiece of the author's creations.
That's how it is if you add a little creative and original ideas You can make interesting paper from ordinary paper, on which you can earn good money. And for a start, it is necessary to find a suitable resource where everyone can start creating from the very Azov. One of them is located on the link at the beginning of the article.
Joel Cooper is a surprisingly talented master. He creates stunning masks and complex geometric figuresUsing the ancient Origami technique. It seems as if the artist applied the whole arsenal of materials, although in fact there was exceptionally colored paper.
Joel alternates sheets of bright and muted shades, which gives the figures an additional visual volume. Sometimes Kopper's wife, professional artist take part in the artistic design of work. Now the Cooper family lives in Kansas and has its own shop with the uncomplicated name "Origami Joel".
It so happened that Joel got acquainted with the art of origami pretty early. The artist recalls that in his childhood, which had to be in the 70s, the parents acquired the Twenty Machmaker "The Family Creative Workshop" - a kind of allowance for the most diverse crafts. "Then I was very interested in the eleventh Tom called" Figures from Paper Masha ". Apparently, it was the most turning point, "the artist remembers. The boy so shocked what he saw that he was inspisely wanted to master the difficult technique and make it all the figures presented in the book.
"I always liked the most difficult models," says the artist, "the most interesting in origami is geometry. Since I myself began to invent new figures and forms, books with instructions moved to the background. Perhaps also because in childhood I read them a huge set. True, I can not not note the book "Creative Origami" Cunichiko Casahar. The book was built very competently - from simple figures to more complicated. Probably, this is exactly the book with which it is worth familiarizing with this craft. Detailed instructions Must know a newcomer, "Kupper says.
Cooper is as follows: "For me, Origami is a kind of compromise between the flight of engineering thought and pure aesthetics. My task is to make the origami form as attractive as attractive as possible, because sometimes competently folded origami is like a perfect mathematical equation! For those who are just starting their way in the art of origami, I would recommend starting from the most simple figures, stocking and not torturing. "
Another artist Nguyen Hung Cuong, like his colleague, Joel Coupur, knows a sense in the art of creation from ordinary paper. Vietnamese Nguyen Hung Cuong - a recognized master of making animal figures.
