According to legend, the rose did not yet have thorns... Such beauty is easily made from paper. A ready-made flower without thorns that will not fade and become an original gift to a loved one. To make an origami paper rose, follow the step-by-step instructions.

Beginners should choose easy way to learn the basics of the procedure.

The process consists of several interconnected stages. The first is the preparation of lines (or stripes, depending on the scheme). This technique creates a foundation for folding. The sheet of paper will need to be turned over 3-4 times in a special way, following the instructions. The second stage is folding.

What you will need:

  • a sheet of paper (office, corrugated, special colored);
  • origami diagrams;
  • pencil;
  • scissors;
  • PVA glue or glue gun (for fastening);
  • scissors;
  • wire (if necessary).

It’s better to start mastering manufacturing with simple circuits so that even a child can make an origami paper rose on their own. Some techniques allow you to make crafts without using glue or other additional materials.

Rolled paper rose

Take a sheet of paper prepared for the craft.

Cut the sheet into 2-3 equal long strips. Remember, the width of these strips determines the size of the future flower (the wider, the larger the rose). It is better to do 1-1.5 cm.

Gently bend the finished strips diagonally. So from an A4 sheet you will get 2-3 (or more) colors.

If you want to additionally make a branch for the finished rose, take a separate sheet of green paper (corrugated or thick colored paper will do). Cut the sheet into 2-3 long strips. Let them be 10-15 cm in width. Make sure that the length of the strips matches the size of the flower. Preferably 15-20 cm. If the flower is small - 10-12 cm. Fold and seal the edge with PVA glue.

Cut the leaves separately and glue them to the finished branch.

Carefully glue a rosebud to the end of the resulting branch. The method is considered simple and can be done quickly.

Origami rose simple

Master class on making a simple rose without diagrams. Suitable for beginners to try medium hard, corrugated, office or colored paper. Trim off the excess strip to create a square sheet.

Fold the paper in half first. Carefully fold the resulting rectangle in half.

Open the upper side of the square, following the direction: from left to right so that you end up with a triangle. When finished, turn the workpiece over. Fold the other side of the square in a similar way. The result is a triangle.

Fold the bottom corners of the resulting triangle, following the center line. Instead of one, there are now two identical small triangles. Open and straighten the craft - you will get a square again.

Turn the workpiece over. Bend both lower sides of the upper triangle symmetrically, following the direction of the straight center line.

Fold one top corner towards the visible center point from the bottom line of the triangle. Spread out the sides.

Origami rose - transformer

The result is not a rose, but a masterpiece. One sheet is enough to make the craft. The finished rose is transformed from a volumetric cube and back.

You will need:

  • thick paper of 2 colors (for example, pink and green);
  • scissors;
  • ruler.

The procedure seems dreary and complicated, but if you follow the instructions step by step, everything will work out. There is no need to take 2 colors, one A4 sheet is enough. It is cut into several identical squares (9x9 cm). But it’s better to take 2 colors, it’s easier to make an origami rose.












Fold the square in half. Fold both halves in half one by one so that the folds are on one side.

Fold the upper right corner, focusing on the first fold on the left. Iron it.

Fold the bottom right corner as well. For convenience, you can unfold the workpiece, then the corner will be on top. To the three straight folds on the paper, two diagonal ones were added.

Fold the bottom corner on the left, aligning the cut of the sheet so that it matches the small fold on the right.

Align the top cut by pressing it with your finger, and then secure the resulting open pocket (see photo).












Turn the piece upside down. Repeat the manipulations with the small lower corner on the left. Just look, push the corner downwards from the previously made corner.

Iron the fold, following it until it intersects with the vertical fold on the right, as you have already done.

Repeat the manipulations to get another fold.

Turn the workpiece over. Carefully fold the corners. Fold the bottom right corner and the top left corner.

The result will be a square with several corners. Fold the remaining sheets (pink) as well.






Green squares must also be folded until pockets are formed. Will help step by step instructions, described above. Fold the small corner at the bottom, located on the right. Immediately bend the resulting corner upward.

Rotate the workpiece up to 180 degrees and repeat the steps described above, taking the bottom corner on the left. The result will be a blank similar to the pink one, only with a folded corner.






Turn the workpiece over. Bend its upper corner looking like the pink ones, then the lower corner.

At first it seems that making an origami rose out of paper is very difficult and time-consuming. But in the end you will get a paper cube that will transform into a beautiful little flower.

Connect the green parts. Hold the first (left) piece so that the small corner looks up, and the longer corner looks down. Insert the second (right) piece at a long angle into the groove.

Turn the third part and carefully insert the long corner into the groove from the second part. Insert the long corner from the first into the groove from the third.

Follow the description and check the pictures. Try to ensure that the diagonal slots of the three parts form a triangle.















Collect pink ones. Again, insert the long corners of these parts one by one into the open grooves. Look at the slots. You can see how the slots radiate beautifully to the sides from the top.

Let's connect. Carefully insert the long corners from the pink ones into the open grooves of the green ones. Do not touch the short corners. You will get a small cube with short corners sticking out. Open the green ones.












It is more difficult to open the petals. To make the flower beautiful, act carefully. It seems that the craft was assembled incorrectly. The petals just hold tighter. If it doesn't work with your fingers, take something sharp.









Having pulled everything out, straighten the center, then the edges so that every curl is visible. Here's how to make an origami paper rose that can turn back into a two-color cube.

Many people are interested in how to make a rose from origami paper. This craft can be used to decorate a wrapped gift for a birthday, Valentine's Day, or March 8th. You can make a bouquet of artificial flowers and put it in a vase, or create origami from several roses volumetric panel for room decor. And besides, in the process of such work you will calm your nerves, experience beauty and learn something new. It is also recommended to involve children in such creativity. This develops perseverance, attentiveness, accuracy, spatial thinking and fine motor skills fingers, which is useful for development speech apparatus. This joint activity brings children and adults closer together.

What is origami?

Origami is the ancient Japanese art of folding all kinds of paper figures without the help of scissors and glue. The technology has its roots in Ancient China, where paper was invented. For a long time this type applied arts was available only to the upper classes. It was considered good form to master the technique of folding paper figures.

Important! Paper cranes are believed to bring good luck and fulfillment of wishes.

Now origami is widespread all over the world, and it has the following features:

  • It can be simple and modular (the figure is assembled from several, sometimes numerous parts).
  • There are also different techniques This art is wet folding, folding according to a pattern (a drawing with designated folds).
  • Typically, a square sheet of paper is used to fold origami figures.
  • To preserve the shape of a complex model for a long time, they came up with the idea of ​​using paper impregnated with adhesive, that is, the origami technique is being improved every day.
  • The most popular figures are those that are easy to create - tulip, frog, crane, fox, boat, heart. You can learn from them. There are many more complex models that will require more time, patience and skill.

Schemes for origami can be easily found on the Internet. We will focus on how to create a paper rose using the origami technique.

Important! Rose is one of the most beautiful and popular flowers. This is a symbol of beauty and femininity, although in different countries this flower has different meanings. It can be considered a symbol of wisdom, pride and even mystery.

To create a paper rose, there are several simpler and more complex techniques. In both cases you will receive beautiful craft, which can be used for decoration.

How to make a rose from origami paper? Scheme for beginners

Using this pattern, you can make origami roses with your children, it’s not difficult.

Required material:

  • If square sheets of paper are usually used for origami models, then in this case take a sheet of A4 colored paper. Color - your choice (red, pink, cream, yellow, burgundy or any other).
  • Also prepare scissors and PVA glue (you can use stationery glue).

Procedure:

  • We cut the sheet into strips 1 cm wide. We cut along the long side.
  • Take a strip and bend the tip so that a corner comes out. Having retreated a little, we bend it again, then again.
  • We take this curved tip and roll it into a tube with our fingers. This turned out to be the middle of the bud.
  • To form a flower, continue to bend further paper tape into the corners, and then twist it around the middle.
  • The tip is discreetly fixed to the flower with glue. You have a small rose flower. This rose can be attached to a skewer to create a flower on a stem.

Important! If you want a larger size, you can cut the strips wider, but then in order for the strips to be long enough to form a beautiful bud, they need to be glued together.

  • Wrap the skewer in green decorative tape or green paper.

Important! Several of these roses can be placed in a small vase. Origami rosebuds can be used to decorate panels, photo frames, gifts, and homemade cards. The rose itself can be decorated with various sparkles or sequins. Thus, it will look even more impressive.

For those who are interested in how to make a rose from origami paper for the first time, the pattern for beginners is quite suitable.

How to make a paper rose? More advanced origami

This scheme is a more complex process than the one described above. However, a flower made using this technique looks more natural and beautiful.

Required material:

  • Colored double-sided paper, red or any other color.
  • Scissors.

Procedure:

  1. Cut a square measuring 10x10 cm from a colored sheet of paper.
  2. Fold the sheet in half. Now cut in half again.
  3. Flatten the top into a triangle. Turn it over and fold the workpiece into a triangle on this side in the same way.
  4. Bend the right and left corners upward in the shape of a diamond.
  5. Bend these corners in half downwards and return to their original position.
  6. Lay out the small triangles that make up the rhombus into squares.
  7. Bend the resulting pockets in half downward. Turn the workpiece over and bend it on the other side in the same way. You will end up with a pentagon with a large angle on top.
  8. On the resulting figure, bend the large corner down in half and return to its original position.
  9. Open the lower part of the figure like a book.
  10. Pull the inner part of the resulting “book” to the sides by the middle and flatten it. You will get a square with two triangles inside.
  11. Turn the workpiece over and pull the triangle up.
  12. Bend the lower right square diagonally from top to bottom.
  13. Rotate the workpiece 180 degrees, and similarly make bends at the lower right square.
  14. Place the resulting figure in your left palm, and with your right hand, grab the center and carefully turn clockwise until a rosebud is formed.

Important! The corners of the petals can be slightly curled using a pencil.

How to make a rose out of paper? Origami modular

We suggest trying another, medium-complexity scheme for creating a paper rose. But this is already an example modular origami when a figure is assembled from several elements.

Required materials:

  • Double-sided colored paper.
  • Scissors.
  • Stationery glue.

Procedure:

  • Prepare 8 squares from double-sided colored paper. The result will be a rose made of two layers.

Important! If you want a fuller bud, cut 15 squares, then the flower will consist of three layers.

  • Take a square and bend it in half. Turn back.
  • Turn the square clockwise to create a diamond shape. Bend the right corner along the fold line inward.
  • Fold the left corner in the same way.
  • Use a pencil to curl the corner a little. The base of the first petal is ready.
  • Using the same pattern, make three petals from which the first row is assembled.
  • Collect them. To do this, apply a drop of glue to the left corner of one petal and the right corner of the next. You should end up with three module petals glued together in a circle.
  • For the second row, prepare 5 petals in the same way. Glue it together. First at the bottom, then turn it over and glue it at the top. We connect the petals in a circle again.

Important! If you have an origami rose of three tiers, and you have prepared 15 squares, make the third row of 7 petal modules in the same way, and glue them into a circle in the same way.

  • Now insert the blanks one into the other to make a rosebud.

Important! For beauty, you can make tiers of petals from different shades- red, pink or any other paper. Decorate the rose with sparkles.

Rose Kawasaki

Origami master Toshikazu Kawasaki is known throughout the world. thanks to its very realistic models. Repeat his masterpieces, even ready-made schemes, not everyone succeeds. One of his most famous and beloved figures is the rose. She is so beautiful that she looks like the real thing. This origami model is called “Kawasaki Rose”.

It is quite difficult to repeat the creation of this rose, following only verbal instructions, so check each step with the illustrations, or even watch the video tutorial. There is not only a special technique for folding paper, but also all kinds of rotations of the workpiece.

Preparatory work:

  • As always in classic origami, you will need a square of paper. For the rose, of course, take double-sided paper in red, pink, cream, or any other color of your choice.
  • Unlike previous options, when making such a rose, you first need to make all the necessary folds on the paper on both sides, and then fold the flower according to the instructions.
  • Some origamists use paper clips to fix kinks during work. So, just in case, stock up on them.

So, how to make a rose from origami paper using the technology of master Toshikazu Kawasaki?

Procedure:

  • Take a square and fold it in half, then in half again, and again. We do the same on the other side. When you open your square, you will get 8 vertical and 8 horizontal stripes.
  • Now fold it in half diagonally, and in half 3 more times. Likewise, on the other side. As a result, when turning, 16 diagonal stripes will appear in one and the other direction.
  • Fold the corners along the second diagonal line. There will be 4 vertical stripes between the folds.
  • Now we fold the workpiece along the diagonal bends, but leaving a square with a diagonal recess in the center.
  • If everything is folded correctly, then this figure folds into a kind of hexagon with a slightly twisted center (which is a square folded diagonally).
  • Place the long side up and bend the top right flap towards you along the fold line.
  • We unfold the workpiece. An octagon should emerge, with a rhombus in its center, with an inflection extending from each corner. A bit like a propeller.

Important! To fix the center so that it is convenient to further collect the flower, you can strengthen this central diamond with a piece of tape.

  • We turn the workpiece over and begin to bend all the corners one by one in one direction, according to the fold lines, giving the figure volume. At this stage of work, you can already notice the outlines of a rosebud.
  • The most difficult part will be the design of the petals. To do this, bend one of the corners, unfold it, and then bend it inward. After folding, bend this part in the opposite direction along the fold lines of the small triangle.
  • We repeat these steps similarly for the remaining rose petals.
  • Next, we put the edges of the petals into the pocket of the adjacent petal.
  • After all the manipulations, there is a hole left at the bottom of the flower. We remove it by gently pressing on the bud on the sides and bottom. As a result, you will get a closed flower bud.
  • To open it, use a pencil to squeeze out the core of the rose.
  • Now we decorate the side petals, slightly bending the double, then the single part of the corner. We repeat the algorithm of actions with other petals.

If you acted strictly according to the scheme, checking the illustrations, then the result should be gorgeous rose Kawasaki, which will decorate any composition. It can be supplemented with a stem and petals.


The rose is, without a doubt, one of the most beautiful flowers in the world, which is why it is very popular.

A paper rose is no less attractive than a real one, and the fact that you do it yourself beautiful flower , makes the rose even more meaningful to the person you give it to.

Learn making a paper rose is not difficult. There are many ways to do this, and you will learn about several from us.

How to make a rose with your own hands. The easiest way.

You will spend very little time on the rose in this example, but will get a lot of pleasure. Such flowers can be used as decor in an apartment or as symbolic gift with your own hands.



You will need:

Thick paper

Scissors

Beautiful vase

1. From thick paper you need to cut a square measuring 10x10 cm.

*The color of the paper depends on the color of the rose you will be making.

2. Draw a spiral on the square (see picture).

3. Cut out the drawn spiral.



4. Start rolling the paper spiral starting from the outer end.

5. Screw the bud tightly to the end and glue the inner end to strengthen the structure.




The rose is ready, and you need to start making leaves for it.

6. Cut out a leaf and glue it to the rose.




To make the rose look more chic, place it in a beautiful vase.

How to make a paper rose. Method II

You will need:

Thick paper

Scissors

Glue (adhesive tape)

1. Fold a sheet of A4 paper in half, and then in half again.



2. Now you need to cut the sheet into 4 strips. To do this, unfold it and cut along the folds.

3. Use duct tape to hold the cut strips end-to-end together, creating one long strip.



4. The strip that you have obtained needs to be twisted so that you get a rod-trunk (see picture).

5. You now need to fold the remaining part of the paper in half, while slowly turning it around the center (see picture). Continue wrapping and gathering layers until you have a rose.





*If you wish, you can paint the rose with your favorite color if you made it from white paper.

How to make a rose. Method III



You will need:

Crepe paper (red and green)

Stick, skewer or wire

Pencil

Scissors

Floral tape or glue

1. Make a heart shaped template. The size of the template depends on the size of the flower. In this example, the height of the heart is 15 cm.



2. Cut out 5-6 hearts according to the template.



3. Making a stem. Prepare 3 wires or a stick and wrap it with floral tape.

* Floral tape can be replaced with glue.



4. Making petals. Gently stretch the paper wide. Wrap the top edge of the heart around the round handle.



Wrap the first petal around the stem and secure it with ribbon.



Do the same with the remaining petals.



5. Making leaves. Prepare 3 wires and wrap them in crepe paper. Next you need to glue the leaves to them, which must be prepared in advance.



6. Making a rose cup. Cut a strip of green crepe paper.



Attach the strip to the base of the cup using adhesive tape (you can replace it with glue).



Attach the leaves to the stem. Make one common stem and decorate it with green crepe paper.



Paper rose. Method IV



You will need:

Printable template

Printer

Scissors

Stick, toothpick, skewer or wire

Pencil

1. To make such a paper rose you need to download a flower template

Scheme of how to make a rose


2. After which you printed out the template, cut out the petals and leaves.

* Take a close look at the template, where all the petals and leaves are numbered.



3. Use scissors to bend the ends of the petals on both sides.

4. Three green leaves also need to be bent in half lengthwise.



5. Prepare a toothpick, thin wire, stick or skewer and twist petal number 1 around it. Use glue to secure everything.



6. Now around twisted petal number 1 you need to wrap petals number 2 and 3 and also secure with glue.



7. You need to glue petals 4, 5, 6, 7 together to make something similar to cones (see photo).



8. Collect and glue all the parts of the flower together!



You can find roses in other colors by clicking on the links below.

DIY paper roses. Method V

Like the previous roses, this one can be made in any color. The example shows the color red.



1. Prepare colored cardboard. Draw a spiral on it. Try to make the line that you draw from the center to the periphery not even, but a little wavy.

2. Using scissors, make a cut along the entire drawn line. You should get something similar to the peel of a peeled apple.

3. Now you need to wrap your spiral around your pencil. Try to wrap tightly until you reach the middle. After this, you need to remove the pencil and let the flower straighten out.

* Using your fingers, you can try to slightly bend the paper petals in the central part.

4. Apply a lot of glue in the center and let it flow into the central part of the spiral. In order for the glue to set well, you need to press the entire structure to the bottom.

DIY corrugated rose

You will need:

Corrugated paper (pink and green)

Scissors

Wire (straightened paperclip or skewer)



1. Prepare corrugated paper pink or red and fold it several times, first lengthwise and then widthwise.

2. Using scissors, cut out what looks like double petals, shaped like hearts. In this way, you can make 8 petals at once with one cutout.

* In the video, the petals are simply cut out of paper, but you can first draw them on it and then cut them out.

3. Each group of petals should be slightly crushed to give more naturalness. You can stretch it by pressing your fingers into the middle part.

4. Now you need to cut a strip 3 cm wide from a roll of corrugated paper (choose the length yourself, based on the video tutorial). Apply glue along the strip.

5. You need to put a short length of wire at one end of the tape (you can replace it with a straightened paperclip or skewer) and wrap the entire strip around it. This way you will get the core of the rose. It is to this that you will further glue the petals.

6. All that remains is to apply glue to the petals and attach them to the central part.

7. At the final stage, you need to make leaves from green paper. To do this, fold the green crepe paper in half and half again, and cut the shape of the petals as shown in the video.

* In the video, a foam rubber strip is pressed against the wire, and then green paper is wrapped around the wire along with the foam rubber.

Origami rose Kawasaki (video)

This method of making a paper rose was invented by Kawasaki, after whom it is named.




How to make a rose from a napkin (video)



Origami rose from a napkin (video)


Rose is the most delicate, vulnerable and beautiful flower. The rose is called the "queen of flowers". This is the color of love, tenderness, femininity and grace. The rose is the most dramatic flower. No one can resist the magic of the beauty of these flowers. No man can resist the desire to give his beloved these flowers - roses. Making a paper rose is quite simple if you follow the simple instructions in the picture diagram.

Origami pattern: Rose from a piece of paper

(Click on the image to enlarge the picture)

1. Fold a square piece of paper in half.

2. Fold the resulting rectangle in half again.

3. Open the part indicated by the arrow and smooth it out.

4. Turn the product over.

5. Open the part indicated by the arrow and smooth it out.

6. Fold the bottom corners towards the center line.

7. Open the part indicated by the arrows and level it.

8. Fold along the dotted lines.

9. Turn the product over.

10. Now on this side do the same as in pictures 6 - 8.

11. Fold to form a crease and unfold back.

12. Fold and unfold.

13. Align as shown in the picture.

14. Turn over.

15. Can stand.

16. Open the part indicated by the arrows, then fold.

17. Insert 4 fingers into the center of the square as shown in the picture.

18. Roll three or four times.

19. Roll three or four times clockwise on your fingertips as shown in the picture.

20. Eight petals are folded.

21. The beautiful rose is ready!

Flowers - great joy and decoration of our lives, but, unfortunately, it is impossible to admire them all year round. If you love flowers with all your heart, then an origami rose, the diagram for which will be described below, will help decorate your home. And not just the house. You can decorate your office and desk in the office, your bedroom or children’s room with flowers, or give it to your mother or employee on March 8th.

Origami rose has many various schemes and assembly methods. The simplest ones, which even children can master, and the more complex ones, which can take many hours to create, but the result will not disappoint you. If you have children, then collaboration working with them on this craft will give them a lot of fun. You can do it with them unusual gift for grandma's birthday. Guys can always surprise a girl with their origami; we’ll tell you in more detail how to make a rose.

Of course, if you have been doing origami for several years, then this rose will simply add to your collection of wonderful crafts. The advantage of our rose is that it has a flat bottom, and with many of these roses you can easily decorate a wall or a craft, a postcard or even a painting. With children, you can make a three-dimensional picture by drawing a vase and gluing many roses of different colors and sizes, we will get a wonderful bouquet.

Description of origami, how to make a rose according to the Evi Binzinger pattern

In the world of origami, creating a Kawasaki rose is now extremely popular, but we will make it no less beautiful - according to the Evi Binzinger pattern. To create it you need a square sheet of double-sided colored paper.

We bend the sheet horizontally, vertically and diagonally. And bend it back.

Now fold the sheet in half horizontally to the center again, as in the photo

We do this action four times.

Again we bend the edge in half towards the center, but this time towards the small lower part.

We repeat three more times on each side, obtaining the necessary folds as in photo 7.

Now you need to make the basic blank for the rose. To do this, you need to fold the sheet in half on both sides towards the center along the intended fold, and fold the resulting fold in the corner diagonally.

We repeat this action four times, and as a result we get a small square with petals, as in photo 13. Bend them to the right.

The next step is to give our rose its shape. Carefully bend the edge of the petal upwards from the center outwards. We do this 4 times, as a result we get a square with bent edges and sharp petals. This stage will help us give the rose volume.

We will also repeat this action 4 times. It is necessary to bend the corners of the square towards the center and bend them back.

Now we will hide the sharp corners between the folds of the paper on the perpendicular side. Having done this operation in a circle 4 times, we get a semicircular rose.

Let's give our origami rose the necessary volume. In the places where we hid the corners, carefully split the petal, bend one part to the center, and give the second a flat shape.

Carefully bend the outer edges of the rose outward. And we admire the end result! The rose is ready.

Origami rose as a decoration for your world and development of creativity

Having created such a rose, you will definitely want to make another one, and then another one. This exciting activity will not leave your children and loved ones indifferent. Besides origami roses, you can make other beautiful flowers. Having made such a bouquet, present it as a gift to people close to you.