:: How to make a tattoo machine ::

How to make a tattoo machine

We make a tattoo machine with your own hands. The very concept of the pallium was formulated in another 20-2 years of the 20th century. To this day, people are increasing on their body anything and pay for Nix money, but not many know that the tattoo itself was born in the zone 100 years ago. And today we will consider a device that will allow you to make tattoos professionally. To create such a device, you need only a couple of small things - helium handle, guitar string, motor from DVD drive of the player or from a toy machine and a charger from a mobile phone.

We take a paste out of helium handle and remove the tip of the paste, where the ball is where. Next, we take a needle and on the back of the tip insert the needle and click until the ball falls. Then we take the paste and blow it into the washbasin until the whole gel will come out of it. Now it's time to make a count. To do this, take a guitar string and remove the helix in advance. We need a stretch of strings with a length of 20 centimeters. Next, you need to sharpen one end of the string and for this we prepare the electrolyte. We take a coffee glass and pour water into it, then you need to pour two teaspoons of the food salt into the water and mix the solution.

We take any power supply of 9 volts 1 amp (you can use a transformer from the game console type of a segue or similar to it) and a nail. We connect the transformer into the socket and plus from the transformer with a string, and minus on a nail. Then we interfere with the nail and string into the water, but we do so that they do not touch each other. The string is immersed in water not completely but only 2 - 3 millimeters. Subsequently, the chemical reaction the metal strings will be collapsed and sharpened. The reaction needs to be continued within 15 minutes, then the string needs to be washed and as a result we get the sharpest number for the tattoo machine.

After all, we take the head for the drive gear and insert the motor in the shaft (the head can be found in any cassette tape recorder, it will go to the motor's shaft in the mechanism), you can also apply a gear as I can also apply. We take an ordinary needle and go to the gas stove. Heat the needle and make one hole on the head that we in advance put on the axis of the motor.

Hole must be made for 1-2 millimeter from the center. Take the glue momentum and attach the motor to the gel hand cover. After the glue is driving, you need to squeeze the location of the fastener with silicone, and then swept the scotch for resistance. Then the aggravated tip of the string must be skipped through the hole where we used to have a ball, the string is in the paste, and its second end needs to be bending in the form of a hook and stick into the hole that we made a needle on the motor head.

Now we collect a handle, connect the charger for a mobile phone to the motor and everything is ready. Tattoos make a black gel from the same gel handle. For the preparation, we take several gels of the handles, take out the paste and the tip, take the plug from the vodka and gently and slowly blow in the paste. Subsequently, the gel will be in traffic. Then we turn on the machine and within 10 seconds immerse the acute tip in the tube with gel. Then we take out and make a snap, and so continue until the end of the knocker.

The devices have been trimmed many times and with its help you can put a pinch of the knocked out anywhere than on the factory tattoo machine created only for the purpose of the target. Be careful because the tag is one of the ways to transfer infection! Before each tattoo, you need to wash the tip of the device with alcohol.