The swan is a symbol of purity, fidelity, perfection and wisdom. These noble birds are photographed, painted, and sculpted. Swans made using the origami technique look interesting. But many are afraid to work with paper because they consider it a fragile material. However, this is a big misconception.

Today you will learn how to make a swan out of paper.

Simple origami



To make such a swan you will need a square sheet of paper and a little time.

What to do:


Modular origami

It's very colorful and beautiful craft. All parts are attached by hand, without the use of glue or paper clips. But there is one minus. This is very painstaking and time-consuming work. First you need to make the modules themselves. Their number may vary. Depending on the size of the swan. You can also make each layer a different color. In general, this is a matter of fantasy. Good office paper is suitable for this craft.

Depending on the size of the craft, you can make blanks:

Now we put these rectangles into modules.




What to do:

If you do everything correctly, you will end up with a module like this.

Folding a three-dimensional swan

What you need:

  1. For a pure white swan there are 459 modules: 1 red and 458 white.
  2. For a multi-colored swan, there are 459 modules, but in different colors: 1 red, 136 pink, 90 orange, 60 yellow, 78 green, 39 light blue, 36 blue and 19 purple.

What to do:

  1. Arrange 3 pink particles as shown below.

  2. We insert one side from each module into the pockets of the third.

  3. Take two more modules and attach them in the same way to the previous structure.

  4. We repeat similar steps until a circle is formed.

    Important! Hold the structure. Since before the formation of a circle it can crumble.

  5. We put on the next row in a checkerboard pattern. It will be orange.

  6. Two more rows are typed in the same way.

  7. The next move is very difficult. You need to turn the structure up. If everything is done correctly, then you will get this shape.


  8. We repeat all the same steps. Only now the modules are put on not from the side, but from above. The next row is yellow.

  9. The next row will be with gaps. They are needed to create the neck and wings. Remove two modules (neck) and on either side of them make two rows that will consist of 12 yellow particles.

    Important! Previously, each row consisted of 30 modules. After creating a gap, there will be 24 particles in the row.

  10. Now each next row needs to be reduced by one particle. If done correctly, row 8 will consist of 22 modules. 9 – out of 20, 10 – out of 18. And you get this design.

  11. Row 11 is blue and consists of 16 particles. 12 out of 14.

  12. Row 13 – of 12 particles blue. 14 – out of 10. 15 – out of 8 pcs.

  13. 16 row purple of 6 pieces. 17 – from 4. 18 row of 2 particles. After this the wings are finished.

  14. Now let's make the tail. It consists of 12 green particles and 3 blue ones. It is made similarly to the wings. Each subsequent row minus 1 piece.

  15. Now the neck is created. The particles are connected in a different way. Each subsequent module is attached with two corners to the pockets of the previous one.

You can learn how to make a small swan from modules using the origami technique from our article. It takes little time and materials to make. Almost anyone who has the tools at hand can handle the job. necessary materials and a simple tool such as scissors or a utility knife. A small swan figurine will be an excellent decoration on your desktop or as an addition to a gift for a loved one.

Origami is a very ancient art form that came to the world with light hand Japanese Various paper figures amazed us with their simplicity and, at the same time, beauty and grace. Products made using the modular origami technique have a particularly unique look. Everyone without exception likes their expressiveness and realism. For the most part, these are quite large, volumetric products, the production of which takes a lot of time. But there are also small modular figures, in no way inferior to their larger relatives. In our article we will talk exactly about such small origami. Today you will learn how to make a small swan from modules.

To get started, we need to take paper of three colors - white, red and orange. And, of course, scissors. To begin with, we will prepare modules - individual elements, which are the material for constructing the product. To operate, you need twenty-two orange modules. This color is not important, so you can replace it with any other. Also, you need to prepare one hundred and thirty modules white and one is red.

Making modules is easy. We will take an A4 sheet of paper and fold it in half. Fold the resulting version in half again and again. Then we unfold the sheet. By cutting it along the folds, we get sixteen modules. To make them smaller (ideal for our product), we will fold the sheet in half one more time, which will give us the opportunity to get thirty-two modules.

After these steps, using scissors or a stationery knife, we will cut it into separate parts (sixteen or thirty-two). Then we proceed according to the proposed scheme below.

As a result, we should have the following elements - modules.

Each individual row of the little swan will consist of fifteen modules, which we will place as shown in the photo.

We connect them together as follows.

In the process we will see this picture.

We finish working with the second row of the product and move on to the third.

We will perform the third row according to the principle already known to us.

After finishing work on the third row, we will get this nice pointed figure.

We continue to attach modules in subsequent rows (fourth, fifth, sixth and seventh).

In the next row we begin to form the wings of our little swan. To do this, we will connect the modules in the following order: one orange module, four white modules and again one orange module.

In the next row we attach in order: one orange module, three white modules and one orange.

  • one orange module, four white modules, one orange module;
  • one module orange, three white, one orange;
  • one orange, two white modules, one orange module;
  • one orange module, one white module, one orange module;
  • two orange modules;
  • one orange module.

This is one of the most simple circuits swan made of paper triangles. To create such a swan, we will need 458 white modules and one red (or orange) for the beak. How to make a triangular module>>

So let's get started. Let's start making the first two rows. We take three modules and arrange them this way

We insert the corners of two modules into the pockets of the third

We take two more modules and connect them to the resulting structure

Then, in the same way, we connect two more modules... and we understand that the structure is frail and begins to fall apart in the hands with every careless movement. Don’t be upset, in order for it all to hold tighter, we will immediately collect three rows

To do this, take the module and place it like this

And we repeat the trick of inserting corners into pockets

In this way we collect three rows. Each row consists of 30 modules. And we close them in a circle.

Now we take the resulting skirt with both hands on the left and right, thumbs gently press the middle, turning the product inside out

Instead of a skirt we get a saucer

We carefully bend the edges up giving the product this shape:

Side view

Bottom view

From the seventh row we begin to make wings. In the same way as in the previous rows we put on 12 modules. Then we skip two corners (from two adjacent modules) and put on another 12 modules. In the missing place with two corners there will be a neck, and in a wider area there will be a tail.

In the next row we reduce each wing by one module. Accordingly, each wing of the eighth row will have 11 modules

Side view

So we reduce each row of wings by one module until there is only one left (as we lay out the wings, we bend them slightly, giving the desired shape)

we turn the swan back towards us and make a tail (also according to the principle of decreasing by one module in each row)

All that remains is to make the neck and head of the swan. For it we need 19 white and one red module. In red, it is better to glue the corners in advance so that the swan’s beak is not forked. The neck is assembled a little differently. We take two modules and arrange them like this

We insert the corners of one into the pockets of the second

and we’ll assemble all the rest in the same way, bending them in the right way during assembly

Now carefully place the neck on the remaining two corners. The swan is ready.


“The Swan Princess” and “Wild Swans”, “Swan Geese” and “Swan Story” - how many fairy tales do you know about this amazing bird? Do you know how to make a paper swan to tell your child your story in pictures about the mythical bird? However, an elegant paper swan is not so much a toy for children as a confession of the most tender feelings to loved ones. Legends have given the bird a romantic meaning, in most of which it is a symbol of fidelity and endlessly devoted love. Presenting a figurine of a paper swan as a gift, we still talk about the main thing without saying a word. The symbolic bird will say everything itself.

Before you learn how to make a paper swan with my own hands, we will barely touch on the topic of the meaning of a unique bird in different parts of the world. So in India, for example, a figurine of a paper swan symbolizes the universal origin. And the Slavs saw a sensual feminine principle in an elegant bird - a graceful amulet family hearth. The Celts considered the bird a rebirth human souls, and in Greece, an origami paper swan still represents the divine principle. Europeans considered the big swan a true symbol of immortality - a stage of purification of the soul before returning to human incarnation. In general, there is no part of the world where swans would remain undeservedly forgotten.

Materials and components

We will show you how to make an origami swan using the classic, generally accepted method (not to be confused with). You will need a regular square piece of paper of any desired color (classic - white and black for the swan couple). The size of the sheet determines how large your craft will be. Plain paper can be replaced with soft corrugated paper - the silhouettes of the figures will become more realistic, almost animated. You can make a swan from table napkins, fortunately there is no shortage of their colors now either. You can decorate the eyes and wing lines (optional) with a simple felt-tip pen or watercolors.

In fact, the choice of material for this craft is determined solely by you. If you want, take foil or a starched square towel (folds conveniently, more common among European hoteliers). You can rehearse on a piece of newspaper. Don’t forget that they usually don’t make one swan, so as not to invite loneliness. The bird is a steam bird, so immediately plan the second half for it. You can collect swan in larger numbers, and then arrange the products into a single pendant or tabletop decorative composition, and also use the figures as parts of an original dinner setting.

3D folding diagram

Let's look at how to make an origami swan using a basic pattern. This will be a three-dimensional 3D feathered creature that can stand on its legs, spreading its spectacular wings. Understandable step by step instructions will allow you to fold the figure step by step without much difficulty, even for beginners working in the origami technique. Be sure to involve the kids in the process. Shall we begin our instructive master class? Work boldly, without sparing paper, and everything will work out the first time.

  • You probably know how to select a square from a standard A4 office sheet: bend its small edge towards the larger one, forming a corner fold, and cut off the excess with scissors. Next, work with the sheet step by step, without haste;
  • Press the diagonal folds of the square (starting geometric marking) for ease of further folding. Next we will work on the sheet along one of the diagonals. Place the workpiece in front of you as shown in Fig. 1;
  • Following the instructions in the pictures, fold the diagonal corners on top, orienting the edges in the center of the sheet. The upper corner of the workpiece will become sharper than its lower part. You can continue folding according to the pattern or slightly change the order of actions (see below);
  • Turn the bundle over with the front side down, and then again sharpen the now sharper corner of the workpiece by bending the upper planes with the edges towards the center. Now you need to fold the bundle horizontally almost in half, but without bringing the upper and lower corners together (without “reaching out” 2-2.5 cm);
  • Bend the sharp “nose” towards you - this is the head of the future paper bird. Now we fold the entire structure in half along the vertical axis away from us. All that remains is to move and straighten the neck (and head), spread the swan’s wings and place the bird on its “ribs-legs”.

The step-by-step assembly of the basic model of the noble bird is completed. It's time to make a worthy pair graceful swan. This time take it to work paper napkins and hone the skill arbitrarily - proportions by eye. This will be useful not only for housewives for aesthetic table setting, but also for young people at romantic date It will always come in handy - every girl will be pleased to receive such an impromptu gift. And then young dads will have something to teach their baby.

Swan napkin bowl (candy bowl)

Now let’s consider a practically useful option - let’s undertake to make a swan out of paper that will serve spectacular stand for napkins or a small candy holder (business card holder, paper clip holder - whatever you want). Making this swan out of paper with your own hands is almost easier than the first “basic” model of the noble bird. Use a colored sheet square shape and proceed according to the step-by-step layout:

  • Press the square sheet along the diagonal guidelines, sharpen the corner along one of the diagonals by bending 2 planes inward (same as in our first diagram), then turn the product face down;
  • Connect the far corners by bending the workpiece in half along the horizontal axis. Change again front side, and then unfold (and squeeze) the peculiar pockets from below. The figure will now have 2 conical angles - an acute one and an even sharper one opposite;
  • Change the front side again, placing the workpiece with an acute angle downwards. At the top you will see a horizontal fold guide. Bend the uppermost corner (any of the 2) to the reference fold, marking an additional marking edge;
  • Bend the lower acute corner of the workpiece upward, bringing it to the additional marking edge. Continuing to work on the lower bend, bend its “nose” towards you, focusing on the central axis of the bundle - this is the planned head of the future bird;
  • Fold the entire structure along a vertical axis away from you - the paper swan-napkin holder origami is almost complete. Straighten the neck and head of the bird, bend the bird’s legs-stand in both directions from below;
  • If you want, give the pocket wings a complex geometric shape (arbitrarily) - the boxes will become curly.

All that remains is to open the wing-boxes and fill them with a scattering of sweet dragees or insert table napkins into the wing-pockets - at your discretion. For decoration wedding table These swans can be made from white paper. At such a celebration, they will become an inexpensive, but very aesthetically pleasing accessory. You can also make candy birds from multi-colored foil - they will keep their shape better if the family has a lot of sweet tooths, for whom the swan will have an obviously high interest. Don't be upset if such a candy bowl soon becomes unusable. Making a new one is no longer a problem for you. Moreover, with each new swan, the figures will become even more successful - the skill will develop.

Paper swans are very popular among novice craftsmen making handicrafts. The advantage of this material is that it is environmentally friendly and safe, which makes it possible to make interesting things for children of any age, even preschoolers.

Paper swans can be made using several variations of the origami technique. It could be more or less complex circuit. Swans made from modules (made of paper) turn out to be very beautiful.

Given the huge selection of ways to create a swan, you can find suitable option for any age. Working on the creation of this noble bird will be interesting for every child. In return, he will receive a toy made with his own hands, as well as a lot of necessary skills, including perseverance, attentiveness and accuracy. These are the main qualities that the ancient oriental art of paper folding can teach.

But it is worth noting that paper swans can be made not only using the origami technique. The master has the opportunity to create volumetric craft. Corrugated paper is best suited for this. The main thing is to approach the issue creatively, which will allow you to create the most beautiful graceful swan with your own hands. If, in order to create a swan for cutting out of paper, you print out templates, then any child who knows how to work with scissors can handle the job.

Swan using modular origami technique

To make such a craft, you need to stock up on special paper blanks. They are made very simply from small squares. First you need to cut the paper and then fold it in half to make two triangles. After this, the workpiece is folded into a ball. Then the workpiece is turned over, the corners are folded again, and then everything is bent in half. This should result in one module. To create one swan, you will need several dozen blanks. As for the sizes of the squares from which the blanks will be made, they can be any, depending on the exact size of the craft you plan to make. You can also choose any color. But it's best to make a traditional white swan. Separately, you need to prepare one black module and a couple of red ones to make the beak.

Assembling an origami swan from paper is very simple. To do this, it is enough to nest one module within another. They will cling to the pockets and hold tightly to each other. It's best to start from the head. Here you need to use a couple of red modules, then one black one, and after that all the work will be done with white triangles. The neck and body of the swan should be laid out from them. If desired, you can make a bird with spread wings. Such crafts look especially good.

Advice! The toy will look best if the swan is placed in water. To do this, you need to take a sheet of blue cardboard and glue the finished work in the center. Additionally, you can make water lily leaves and even reeds from green paper.

Origami is most interesting for children at primary school age. For example, a first-grader will have enough care and accuracy to make modules and assemble them correctly. Moreover, at this age, a child can already fully work with scissors, so he can even be trusted to cut paper into squares.

Swan from a napkin

For this method, you can take either paper napkins or fabric ones, which are used for table setting. You can use the decoration when receiving guests, who will certainly be surprised by the imagination of the owners of the house.

To create a paper swan with your own hands, you will only need one type of material. The whole process consists of folding a napkin without using additional devices in the form of glue or scissors.

First you need to take a napkin and fold it in half. Next, it unfolds and connects along the fold. Here you need to iron everything thoroughly, and then turn the workpiece over to the other side. Then the corner is folded over, and the rest is folded in half. This will be the swan's neck, which needs to be slightly stretched and straightened.

The part that will be under the neck will act as the body. You need to straighten it and fluff your tail. To do this, carefully lift the layers of the product. This will complete the work of creating a simple swan from a napkin. It can be used to decorate a table or the entire room.

How to fold a swan from a sheet of paper?

The oriental technique of origami allows you to make very interesting crafts. A swan can be made in at least two ways. The first involves the use of special modules. But this work requires a sufficient amount of time, perseverance and attentiveness. That's why modular swans best for children school age. There are also suitable schemes for preschoolers. They are very simple and do not require the use of scissors and glue, which children's creativity can be very important.

One of the simplest designs involves making a bird with regular wings. To do this, you need to take a sheet of paper and fold it in half, and then immediately fold it back. This is necessary in order to determine the center line of the workpiece. After this, the two corners are bent towards the center.

It should look like a bag. Its acute corner must be bent so that the involved part does not reach one centimeter to the middle. Afterwards, the same part needs to be bent again, but in the other direction. If you look at the workpiece at this stage, it will look like a bird, whose neck and beak can be clearly seen.

Next, the resulting element is turned over and bent diagonally. The head can be adjusted a little and placed at the height that will be most appropriate in this case. A triangle will stick out on the side opposite to the beak. It needs to be bent to form a tail.

At the end, all that remains is to bend the wings, and a simple swan using the origami technique will be ready. This craft is very convenient to do with children. of different ages. Even the smallest children will happily practice origami, and parents will not have to worry about the child cutting himself with scissors, since they are not needed for this work.

Applications in the form of a swan

The swan is a noble bird, so it will look great on any postcard. If a child completes it in the form of an applique, it will turn out real beauty, which will not leave adults indifferent. There can be a lot of options for making such work. You can use a variety of materials for this, but plain paper is best.

First you need to create a base for the swan - paper appliqué. It is required to mark the pond and the greenery on it. Next, blanks of the bird’s head and neck are cut out of white paper. We must not forget that the swan will have black eyes and a red beak.

Next, you can begin one of the most interesting parts of making the applique. Here you can use various materials. If it was decided to do the work exclusively from paper, you need to cut thin and short strips from it. From them you should glue the rings, which in large quantities and are glued in a chaotic manner in the area where the swan’s body is supposed to be. This way the applique will be voluminous and very beautiful.

The second option would be to use corrugated paper or a white napkin. Thin strips are cut from them, which need to be crumpled up beautifully, and then glued onto the appliqué workpiece. This will give the swan an unusual fluffy body. Approximately the same effect will occur when using cotton wool. It makes very interesting swans. In this case, pieces of cotton wool can be draped not only on the bird’s body, but also on its neck.

Very interesting voluminous applications obtained using the quilling technique. Here, strips of paper are used, which are twisted and glued to the base or to each other. From such paper strips you can make an original swan, including a three-dimensional version.

Attention! For children preschool age making appliques using the quilling technique will be a very useful activity, as it allows you to quickly develop fine motor skills hands

You can use various materials to make the applique. Very beautiful works are obtained when using felt, polymer clay and even ordinary plasticine. Recently, a material such as foamiran has become very popular. It is easy to use and allows you to create even volumetric options crafts.

And yet, despite all the variety of materials that are offered to craftsmen, plain paper is the most popular. You can make any craft from it, including three-dimensional ones. Paper is an inexpensive and environmentally friendly material, which is very important when it comes to children's creativity.