How to find out what finger size for a ring. How to find out your finger size before buying a ring. The right time to determine your finger size

Most girls wear rings. But not everyone knows their size. And if when purchasing jewelry in jewelry In the salon, experienced sellers will help you solve the problem of choosing, then when ordering a ring in an online store, it seems to be the size need to figure it out on your own. We offer three simple ways,how to determine ring size on finger at home. Choose the right one!

Method 1: determine by existing ring

The size of a ring is its internal diameter , expressed in millimeters. Therefore, to determine the exact size, it is enough to measure the diameter of the jewelry using a regular ruler. If you are afraid of "missing" your calculations, place the ring on paper and trace it inside , and then take the piece of paper with the drawn circumference to a jewelry salon. There, with the help of special devices, the consultant has no problemswill determine what ring size will suit you.

Method 2: calculate by finger diameter

To RightIn this way, you need to take a small piece of paper. His length should be approximately 10-12 centimeters, width - about 3 millimeters. Next is a matter of technology:

Wrap a piece of paper around your finger and make a mark in the desired location.
Since the ring will go through the joint, measure also the girth of this area.
Choose the average between two numbers. This approach ensures that the decoration will neither fall off nor dangle.

Finally determine ring size The table will help:

Finger size (in mm)	Pin diameter (in mm)	Ring size
47,1	14,7	15
47,6	15,3	15,5
50,2	16	16
52,1	16,5	16,5
53,3	16,9	17
55,1	17,5	17,5
56,8	18,1	18
58,3	18,5	18,5
59,9	18,9	19
61,1	19,4	19,5
62,9	19,8	20
64,3	20,5	20,5
66	21,1	21

If the table below does not contain the figure you got, choose the closest value.

Another way -determine ring size for fingerusing thread. To do this, you need to take a small thread, neither thin nor thick, and wrap it around your finger so that it passes freely through the joint. Then you need to carefully remove the thread so that it does not break or stretch. Last step– cut it in half and attach it to the ruler. The resulting length in millimeters must be divided by 3.14. For example, if your finger circumference is 58 mm, this corresponds to size 18.5.

You are a girl and you don’t knowhow to choose the right ring sizefor a man? Feel free to use any of the methods listed - they are absolutely universal!

Method 3: Find out your ring size by clothing

This method is considered the most inaccurate available, but it can be used if other options are not available. Its essence is proportionality. human body. Often people who wear the same clothing size have approximately the same finger diameter. These parameters are related as follows:

Size S corresponds to a ring diameter of 15.5 to 16.5 millimeters.
Size M - products with an inner circumference of 16.5 to 17.5 mm.
Size L – ring sizes 17.5-18.5.
Size XL – decoration with a diameter of 18.5-19.5 mm.
Each subsequent “X” in the marking is plus one size.

To as accurately as possible, focus on the size of tight-fitting gloves. In this case, the error will be minimal.

The last and most unusual waydetermine what ring sizeneeded - to correlate the diameter of the finger with one of the Russian coins. So, 1 kopeck is size 16, 5 kopecks is 19, 10 kopecks is 18, 50 kopecks is 19.5, and 1 ruble is a full 21st size.

How to find out your ring size according to the Western system?

This may be necessary when ordering jewelry in a foreign online store (for example, on or Joom), as well as when buying a ring in a jewelry store that uses the Western measurement system. Todetermine ring size for finger, first calculate the Russian marking, and then use the table to convert it to American, Japanese or English:

Russia/Germany	USA/Canada	England	Japan
14	3
14,5	3,5
15	4	H 1/2	7
15,5	4,5	I 1/2	8
15 3/4	5	J 1/2	9
16	5,5	L	11
16,5	6	M	12
17	6,5	N	13
17 1/4	7	O	14
17 3/4	7,5	P	15
18	8	Q	16
18,5	8,5		17
19	9		18
19,5	9,5		19
20	10	T 1/2	20
20 1/4	10,5	U 1/2	22
20 3/4	11	V 1/2	23
21	11,5		24
21 1/4Y	12	Y	25
21 3/4	12,5	Z	26
22	13		27
22,5	13,5
23	14
23,5	14,5
23 3/4	15
24 1/4	15,5
24,5	16

To correctly determine what ring size you need, please note on some nuances:

For more accurate results, you need to measure your finger three times: morning, afternoon and evening. If the indicators coincide at least twice, it means right size found.
If you buy wedding decoration, we recommenddetermine ring sizeas close to the event date as possible. This reduces the likelihood of “missing”.
Do not take measurements after sleep, physical activity or during critical days - during this period the fingers may swell.
Days that are too hot or too cold are also not best time, todetermine ring size at home.
It is also necessary to take into account the thickness of the future ring. If the decoration is thin (5-7 mm), then you just need to round the result to the nearest table value. If you need to determine the size of a ring with a thickness of more than 7 mm, you need to make a small stock ", equal to 0.5 mm. That is, when buying a massive piece of jewelry, the usual size 18 turns into 18.5.

We have covered all the most popular methods. Then it's up to you!

Determining ring size using thread

You will need: a fairly dense thread (threads that are used for knitting napkins are ideal), preferably cotton, smooth. Approximately 50 cm - to make it convenient to take measurements.

Step 1.
Take the thread, carefully wind 5 turns on the finger you need (the width of the “winding” of all 5 turns should be approximately 3-6 mm). There is no need to wind it tightly, but the thread should still be pressed tightly against your finger.

Step 2.
After wrapping your finger, cross both ends of the thread (without lifting it from your finger) and use sharp scissors to cut them at the same time. Or simply mark the intersection of the ends of the thread with a pen or marker, unwind the thread and cut it according to the marks.

Step 3.
Use a ruler, tape measure, or tape measure to measure the length of the thread you cut. Divide the resulting length in millimeters by 15.7. The resulting value is the finger ring size you measured.
The resulting size must be rounded up to half a millimeter. For example, 17.1 to 17.5.

Determining ring size nabout the table

Step 1.
Take a strip of paper approximately 1-1.5 cm wide and wrap it around your finger.

Step 2.
Mark where the strip intersects. Remember, the ring must go through the joint, so try running the folded strip along the entire length of your finger.

Step 3.
Measure the resulting length with a ruler - this is the circumference - and select the appropriate size using the table below.

Size(mm)	Diameter (mm)	Ring size
47.63	15.27	15,5
50.80	16.10	16,0
52.39	16.51	16,5
53.98	16.92	17,0
55.56 - 57.15	17.35 - 17.75	17,5
58.74	18.19	18,0
60.33	18.53	18,5
61.91	18.89	19,0
63.50	19.41	19,5
65.09	19.84	20,0
66.68 - 68.26	20.20 - 20.68	20,5
69.85	21.08
71.44 - 73.03	21.49 - 21.89	21,5
74.61	22.33

How to buy a silver or other ring in the FREY online store

INYou will find a variety of exquisite rings made from silver and high-quality jewelry alloys.

We have amazing options for you to choose from silver rings with amethyst, citrine, topaz.A stylish collection from Israel has been selected especially for you - rings with opal, garnet, agate, topaz and pearls. EThere are also rings with cubic zirconia. buy from ussilver rings and rings. The purchase will not be difficult, because... we describe each ring in detail, its size, composition and weight, and also give the rest detailed information about decoration. Rings or other jewelry purchased from us are delivered either.

Your FREYA

Buying a ring is only half the battle. After all, the most important thing is to choose it correctly, by size. Only an experienced specialist, an expert in his field, can determine the size of a finger at first glance. For the rest, we suggest taking a look at other ways to select a ring.

The main thing in the article

How to correctly determine your finger size: the surest ways

“The ring is just right” - these are the words that everyone is waiting for when trying to make a lovely gift. And I really don’t want to hear other phrases. After all, there is nothing more unpleasant than seeing a disorder in front of the person being gifted. Therefore, to ensure that your recipient accepts the gift according to size, we have prepared the most accurate and not so true methods for determining the size of a finger. Try it and tell us which of them are the best, and which ones only describe the essence on paper.

How to determine finger size by thread?

Wrap the thread tightly, but not tightly, around the phalanx 5 times.
Fix, cut off the ends at the joints.
Remove and measure the length of the resulting thread.
Convert the resulting length to millimeters.
Then divide it by 15,7 - the number on the output will be the desired size.

If suddenly a tenth of a number is from 0.1 to 0.4, then always round up - to 0.5.

How to determine finger size from a piece of paper?

This method is partially similar to the first, the only difference is that you need to wrap it once.

Make it small in width paper sheet so that it does not go beyond one phalanx.
Wrap it once around the phalanx.
At the junction of the first end of the sheet with the continuation, draw a mark.
Measure the resulting length.
Convert the number to millimeters.
Divide by 3,14 - the resulting number will be the required size.

How to determine finger size by diameter?

Wrap the thread around your finger as if it were a ring.
Secure to a knot.
The thread ring should be easy to remove and put on.
Remove it from the phalanx, and then use a ruler to measure the diameter of the resulting circle.
Convert the number obtained in centimeters to millimeters.
This number will be your size.

How to determine finger size by finger circumference?

Wrap a thin, lightweight flap around the phalanx and knuckle of the finger.
Mark or record the junction where the end and continuation intersect.
Then measure the length and convert it to millimeters.
Choose the average between the two results.
Use the table below to determine the size you need.

Circle	Size
47,6	15,5
50,8	16
52,4	16,5
54	17
56	17,5
59	18
60	18,5
62	19
64	19,5
66	20
67	20,5
70	21
72	21,5
74,5	22

How to determine finger size using the table?

In addition to the available methods, there is a special table, based on which you can easily find out about the size of the ring. To do this, just wrap your finger in a thick but thin braid, fix it and measure its length. Next, the result is converted into millimeters and the size is determined according to the table below.

Finger circumference in mm	Diameter	Size
44	14	14
45	*14,5*	*14,5*
47	15	15
48	*15,5*	*15,5*
50	16	16
52	*16,5*	*16,5*
54	*16,9*	17
56	*17,5*	*17,5*
59	*18,1*	18
60	*18,5*	*18,5*
62	*18,9*	19
64	*19,4*	*19,5*
65	*19,8*	20
67	*20,5*	*20,5*
70	*21,1*	21
72	*21,5*	*21,5*
74	*22,1*	22

How to determine your finger size using an existing ring?

One sure way is to determine the size using an existing ring.

Decide which finger you want to purchase jewelry for.
Then try on the existing rings.
Take the appropriate one with you to the store and select a new piece of jewelry according to its size.
You can also trace the circumference of the ring on paper inside and outside.
Then the store or salon will help you with the size using a paper sketch.

How to determine your finger size by clothing size?

There is an opinion that people who constantly wear one clothing size have their own universal ring size. According to this vision, body composition is directly proportional to the size of the phalanges of the fingers. Therefore, we will give you a table of clothing sizes with a note about the size of jewelry.

Clothing size	Ring size
XS	14-15,5
S	15,5-16,5
M	16,5-17,5
L	17,5-18,5
XL	18,5-19,5
XXL	19,5-20,5
XXXL	20,5-21,5
XXXXL	21,5-22,5

How to determine finger size according to the Western system?

In other countries, ring sizes are marked differently. When buying jewelry in foreign stores or foreign online stores, you need to know exactly what you are choosing correctly. Therefore, when comparing with your already exact size, correlate it using the table with the country where the product is purchased.

Russia/Germany	USA/Canada	UK/Europe	China/Japan
14	3
*14,5*	*3,5*
15	4	*H1/2*	7
*15,5*	*4,5*	*I1/2*	8
*15,3/4*	5	*J1/2*	9
16	*5,5*	L	10
*16,5*	6	M	11
17	*6,5*	N	12
*17,1/4*	7	O	13
*17,3/4*	*7,5*	P	14
18	8	Q	15
*18,5*	*8,5*		16
19	9		17
*19,5*	*9,5*		18
20	10	*T1/2*	19
*20,1/4*	*10,5*	*U1/2*	20
*20,3/4*	11	*V1/2*	21
21	*11,5*		22
*21,1/4*	12	Y	23
*21,3/4*	*12,5*	Z	24
22	13		25
*22,5*	*13,5*		26
23	14		27
*23,5*	*14,5*
*23,3/4*	15
*24,1/4*	*15,5*
*24,5*	16

How to determine your finger size using a size tape?

Salons that specialize in jewelry have special sizing tapes. It is enough to bring a ring or your finger to it, and it will accurately give the result, which will be the size.

How to determine finger size through the help of close relatives?

Who, if not close relatives, will help solve this problem? Especially if you need to do something without much noise. Therefore, seek help from those who are very close to the person for whom the symbolic gift is intended.

How to find out the size of a man's finger?

Representatives of the male half of humanity also wear jewelry, but not in such quantities as the female half. However, ring size is determined in exactly the same ways as described above:

By diameter;
Around the circumference;
By thread;
On a piece of paper;
According to the given tables.

How to determine the size of a girl's finger without being noticed?

Do not show what you intend to do and do not attract much attention to this operation.
Try to allow enough time to take all measurements.
If a girl is a light sleeper, then it is better to measure the rings she has, drawing them on paper.
Wait for the right opportunity and measure the circumference of the finger, for example, when she is deeply asleep.
Don't ask leading questions if you want to make a surprise.

How to measure your finger size for an engagement ring?

A specialized salon provides a measuring tool with which you can easily find out your required size.
Must be measured indoors room temperature, since in the heat the fingers usually become fuller, and in the cold they become narrower.
For precise definition It is better to measure several times: in the morning, afternoon and evening.
Try to purchase rings closer to the date to be sure of the size and not make a mistake.
Girl in interesting position, has often larger size than before pregnancy. Keep this fact in mind before choosing.
There is no need to try on rings after intense workouts, wild parties, in the morning or after drinking large quantities water.
Establish blood circulation in your hands before measuring the exact circumference.
After purchasing, do not forget to save your receipts for unforeseen situations.

How to determine Chinese ring size using the table on Aliexpress?

The Chinese platform is gaining increasing momentum in the sale of not only things, but also jewelry. Rings are especially popular, as their originality always attracts the attention of beautiful ladies.
But when buying on AliExpress, you need to know for sure the size of the jewelry you are purchasing. Since exchanging goods will be a rather long process, and possibly expensive.
But fortunately, when you purchase an item from each store on the platform, you can check the size chart. It's worth using it before purchasing.

By the way, find out how to register and start shopping on Aliexpress here.

VIDEO: How to find out your finger size?

The ring is one of the best for any occasion. When buying a ring, do not forget to correctly measure the finger that fits it. After all, each finger has its own size. And in order not to get into embarrassment, use our correct advice.

The ring size is its internal diameter in millimeters. The standard size range starts with 15 and ends with 24, in half a millimeter increments: 15; 15.5; ... 23.5; 24. For women, the most popular are from 16 to 18.5, all the rest are predominantly male.

So how can you find out your finger size for a ring at home? There are several simple methods, let's look at the most popular ones.

With another ring

Take a ring from your box that fits on the desired finger. If it is of a simple shape, then just put it on a sheet of paper and draw a circle inside the ring. Measure the diameter - this will be the required value. If the product is complex in shape, then attach a ruler to it and measure the widest internal distance.

In a jewelry store

If possible, contact your nearest jewelry store or repair shop. They will be happy to help you, the accuracy of the result is guaranteed. When the need to find out the size arises often, for example, you are a regular customer of online jewelry stores. Then it makes sense to purchase professional finger gauges.

On websites that trade in jewelry tools, you can find various options. The cost of simple plastic ones is about 150 rubles. This purchase is one for life. I bought it once and have the opportunity to find out my measurements without leaving home at any time.

Thread

The essence of the method is to find out the girth of the finger and calculate its diameter. For this we need:

Thread, preferably thicker, synthetic, so as not to stretch
Pen or marker
Ruler
Scissors
Calculator

We wrap the thread around our finger, mark it with a marker at the junction, or cut it off. We measure the resulting length, divide by the number π - 3.14. We get the value in millimeters, this is your size.

For a more accurate determination, wind five turns. Then the length must be divided by 15.7.

Strip of paper

This method is more accurate compared to the previous one. We will need the same set of tools. Only instead of thread, you should cut a strip of paper about a centimeter wide.

The sequence of actions is the same. Wrap the strip around your finger. Place a mark at the intersection. We measure the distance to the mark and divide by 3.14. It is important to wrap tightly, but not to tighten too tightly. You can also use fabric or a sewing tape measure.

The relationship between the length of the strip in centimeters and the sizes of the rings is presented in the table.

School ruler

The proposed method assumes the presence of a ruler with holes different sizes. This is a kind of school finger gauge. By selection, determine which hole fits most comfortably. Measure its diameter - this is the required size.

Finger width

This method is one of the most effective. Place your hand on a piece of paper. Outline the finger on both sides, in the place where the ring will be worn. The distance between the marks is the desired size. It is important to use a thin pen and keep it strictly vertical to avoid large errors.

Clothing size

There is no clear, direct relationship between these two indicators. However, for a quick approximate determination, this method can be used. But accuracy cannot be guaranteed. The ratios are presented in the table.

Watch the video to see how some of the presented methods are put into practice at home.

What affects measurement accuracy

There are several important factors that can greatly affect the accuracy of measurements at home. Let's look at the main ones.

This is useful:

Ring width. This parameter determines how the resulting value should be rounded. If the selected ring is thin, round down (16.2 will mean size 16). If the ring is wide, round it up (16.2 – 16.5).

Joint thickness greatly affects accuracy. In many people the bone is larger than the phalanx itself. It is important that the ring fits tightly enough, since it will not press on the phalanx. When using a strip of paper, you need to slide it onto the joint.

Weather. In severe frost or heat, a significant change in the thickness of the fingers occurs. It is not recommended to take measurements under such conditions. Wait until your blood circulation returns to normal.

Swelling. The balance of fluid in the body directly depends on the time of day. It is best to take measurements in the middle of the day. However, if your hands are very swollen in the morning or evening, take additional measurements. This factor must be taken into account. Otherwise, problems may arise when you need to remove the ring before going to bed or put it on in the morning.

Physical activity. You should not measure your fingers after intense exercise. physical exercise or a hot bath. You need to wait a while and let your hands return to normal.

Right or left hand. It is important not to forget that the sizes on the right and left hands can differ significantly. This happens especially often in people who work with their hands. If you know the size on one of your hands, then it is better to measure the finger of the other.

From a technical point of view It is better to order a smaller ring size than a larger one. Any jewelry workshop will tell you that enlarging (rolling) a product is much easier and the work costs less. When reducing, it is necessary to cut out a piece of the ring, and this operation is more complex and expensive.

This is interesting:

The importance of measurement accuracy cannot be underestimated. To get a guaranteed result, use several different methods, comparing the results. Never be upset if you miss the definition. By law, you have every right to return the jewelry within 14 days from the date of purchase.

The ring size refers to the diameter of its inner part; the indicators are determined in millimeters. Often the need arises to measure the size of a finger for a ring in the same size. You can carry out manipulations at home using several popular methods. Let's take a look at them!

Ways to measure finger size for a ring

If we consider the diameter according to the standard series, it varies between 15-24 mm. Step - 0.5 mm. Women typically have sizes of 16-18.5 mm. The male half of the population has larger fingers, so they have all other sizes. Let's look at how to find out the finger size for a ring. All methods are ideal for implementation at home.

Method number 1. Ruler

1. You need a triangle ruler, which usually has round holes of varying sizes.

2. Try inserting your finger into each circle one by one, choosing your size. You don't need to push the phalanges in too much.

3. When you find in which hole your finger feels most comfortable, all that remains is to measure the diameter of this circle.

Method number 2. Clothing size

1. There are many ways to determine your ring size. All you need to do is find out your clothing size at home. Then you won't have to go to the jewelry store.

2. This technique gives only an approximate result. Accuracy cannot be guaranteed because everyone's body shape and body type are different.

3. So, size “S” corresponds to a ring size of 15.5-16.5 mm. If you wear "M" clothing, the finger size will be about 16.5-17.5mm, "L" is 17.5-18.5mm, "XL" is 18.5-19.5mm.

Method number 3. A piece of paper

1. Since you can measure the finger size for a ring using a primitive method at home, let’s use it. The method is accurate, so it makes sense to consider it.

2. Cut a long strip of leaf about 1 cm wide. Wrap it around your finger in the place where the ring is usually located. Make a mark with a pen where the beginning and end of the segment coincide.

3. Now measure the resulting value with a ruler, then divide it by 3.14 using a calculator. This is how you get your finger size.

Method number 4. Thread

1. The principle is simple. You need to find out what size your finger is when girthed, then the diameter of the ring is calculated directly.

2. To take measurements, prepare scissors, a ruler, a felt-tip pen, a calculator, and a thick thread (it should not stretch).

3. Wrap the thread around your finger in the place where the ring is usually located. Mark the area where the two edges of the thread meet with a felt-tip pen and cut.

4. Attach the segment to the ruler, divide by 3.14 (the “Pi” value). You will receive an indicator corresponding to your size.

Method No. 5. Jewelry store

1. When thinking about how to measure your finger size for a ring, it would be a good idea to visit your nearest jewelry boutique or workshop. In such places people will be happy to help you.

2. At home, there may be inaccuracies, which cannot be said about such establishments. The master will determine and tell you everything you need to know.

3. If you order often jewelry through an online store, it is recommended to purchase a professional device - a finger meter.

4. Websites that sell such products can offer you the most ordinary (plastic) finger gauges for only 150-200 rubles. This is a one-time required purchase.

Method number 6. Another ring

1. How to determine the ring size for your finger? It’s very simple, just take the second piece of jewelry from the box and try it on. A classic decoration can be outlined on a piece of paper at home.

2. If the product does not have any fancy shape, the procedure is quite simple. Measure the outlined diameter and you will get the desired value.

3. If the ring has a complex shape, try to use a ruler. You want the inner spacing to be the maximum width. This simple method will help with this pressing issue.

Method No. 7. Finger width

1. The method is considered practically the most effective. Use a blank album sheet. Place your palm on it.

2. Outline the desired finger on both sides in the place intended for the ring. It is enough to measure the distance between the marks.

3. You will need the resulting value. Keep in mind that you need to outline the finger with a thin pen, holding it vertically. Errors are unacceptable.

To understand how to correctly measure your finger size for a ring, it is important to consider the width of the jewelry. This feature determines exactly how to round the final result at home.

1. If the ring has a small width, then the value is rounded down. We do the same with a wide ring, only the rounding will be to a larger value.

2. When measuring a finger, the procedure should be carried out several times a day. Depending on the time of day, the phalanges may have different volumes. You will need the value measured in the middle of the day.

3. It is prohibited to take measurements after intense exercise, drinking large amounts of liquid, or during illness. The temperature also affects the measurement; it should be 22-24 degrees.

To take measurements, you should use cunning methods. For more accurate results, be sure to consider some factors and possible errors. To avoid problems in the future, purchase the simplest finger gauge.