Nomination "Fabulous New Year". The master class was prepared by the teacher kindergarten"Solnyshko" urban-type settlement Nekrasovskoe Larionova Irina Vladimirovna.
"Mobile - Christmas tree"
When the first snow falls on the street, we all, without exception, remember the festive sensations that are associated with the New Year, the smell of tangerines, congratulations, gifts, Santa Claus and his granddaughter, snowmen and snowflakes. And when the month of December is on the doorstep, the thought arises in my head, when to put the Christmas tree, how interesting it can be to dress it up. I suggest that you make an unusual New Year's mobile with your own hands, literally from scrap materials (at creative people there are a huge number of them). Here is the New Year's mobile that I got.
So, the materials that we need:
1.cutting cardboard of different colors (always green and preferably larger)
2. colored paper
3.scissors
4.Rule (preferably with a round hole, the diameter of which is 3 cm, if not, you will need a compass)
5.simple pencil and eraser
6.glue (thin double-sided tape can be used instead of glue)
7.thin decorative wire (I took green)
8.needle (with a red thread, so as not to get lost)
9. curly hole punches (you can take others, or use ready-made clippings. I have ready-made flowers and snowflakes that will be useful to me).
The first step is to draw a diagram of our holiday mobile (Let's remember the geometry!): An isosceles triangle with a base of 9 cm and a height of 12 cm.It must be divided into 3 equal parts in height (as shown in the diagram). This is the tree itself. Further - an isosceles trapezoid with bases of 4 and 6 cm. This will be our vase for the Christmas tree - beauties. And 2 circles, each with a diameter of 3 cm (eyes).
If you don't want to waste time on the diagram, then I suggest immediately drawing similar figures on the back of colored cardboard (triangle on green, trapezoid on red, circles on blue).
The next step is to cut flowers, stars or snowflakes with a curly hole punch from colored paper.
Then we put aside the workpieces and proceed to the wire. We cut off 5 pieces of 5 cm, 1 - 18 cm, and 1 - 9 cm.The longest will go to the loop, for which we will hang christmas tree toy... With short ones, connect the top of the Christmas tree with the middle part, the eyes and the flowerpot with the lower part of the Christmas tree. Connect the lower part of the tree with the middle part with the middle wire. Turn over all the details and mark with dots the places where we will make holes with a needle (as shown in the photo). We pierce these holes.
The moment comes when you need to do the most difficult and painstaking work - connect all the parts with wire in the right places (two short wires will connect the top and the middle part of the tree, hang the eyes on the middle part with two short wires, screw the lower part of the tree to the middle part and the flowerpot to the lower part ) and screw it on on each side. Then we decorate the tree with felling, as long as there is enough imagination.
At the top we fix the longest part of the wire in a loop.
Festive mobile " Christmas tree" ready!
Do you like the product and want to order the same from the author? Write to us.
Still interesting:
See also:
Christmas coffee owl
Another wonderful master class by Irina Ledovskaya on sewing a coffee toy "New Year's Owl" (so ...
Postcard "Mitten"
Another work in the "Golden Hands" nomination by Olga Kiseleva from Iskitim. This is a wonderful New Year's o ...
Olga Nosovets
I bring to your attention new year's mobile... TO new year I always want to decorate the group in a special way, looking for interesting ideas. This time the idea was born on the spot - from the material that was at hand. That's what i am used: hoop, foil, white yarn with pompoms, foil insulation, glue, scissors.
The hoop is wrapped in foil. A frame for attaching vertical threads is made according to the diameter of the hoop from yarn (the yarn is simply tied to the hoop)... Threads are tied to the finished frame in random order, of different lengths (medium length determine in advance, at your discretion)... Circles are cut from foil insulation, any diameter, but so that the two circles are necessarily the same, because they will have to be glued together, on yarn.
I made two in the reception mobile from small hoops, added a little tinsel. Here's what happened.
Related publications:
Dear Colleagues! I present to you a New Year's mobile. On the eve of the new year, there is a desire to create and create something unusual and beautiful.
I bring to your attention the Mobile "Birds in Winter". The beginning of the creation of a series of mobiles "Birds" was the creation of the mobile "Birds fly away to warm lands.
I would like to present to your attention one more mobile "Snowman". What is a mobile? A mobile is a very beautiful piece of jewelry, especially if.
White snowflakes timidly touched the barely frozen ground. Slowly, like sleepy flies, they gradually covered the road with a thin layer. So they waited.
You always want to surprise and please your guys with something new and interesting. On the eve of new year holidays create a festive mood.
Good evening, dear colleagues! For a long time I wanted to make a suspended mobile in my group for kids. Many interesting ideas found on.
Autumn with a long thin brush Repaints the leaves. Red, yellow, gold, How good you are, colored leaf! Autumn is the most bright time of the year.
To make a snowmobile we need white xerox paper and a hoop. A-4 sheet of paper must be divided lengthwise into 3 parts. On.
Lyudmila Yukhareva
I wish everyone good day! I present to you for review MOBILE - WINTER... WITH mobile- I introduced you to autumn. So I continue my idea - I create all seasons in this form. This time I took balloon, inflated it, wrapped it with white thread "Snowflake", fixed with PVA glue. The thread is dry, the ball (with time) blown away, but the frame remained. You can attach any winter signs to it (at your discretion, I have white and blue snowflakes, a bullfinch. I have strengthened the sun on top, a snow cloud. (also everything that concerns winter theme) winter Games, winter clothes, winter equipment, did not forget about my beloved children's party New Year. Mobile hangs, takes up little space, but can be removed during operation. And, in general, this is a good tip for children. (when we talk about the seasons)... With such by mobile children's memory improves. Children began to better remember the seasons, their signs, events, and so on. Those who have little space in the group, you can use my idea. THANKS!
I would be glad if someone uses my idea!
Highly interesting decoration interior can be different mobiles. Let's make a mobile of snowmen, which will spin in a merry round dance under a snow cloud.
To make a New Year's mobile, you must:
❆ thick colored paper,
❆ narrow ribbons,
❆ scissors,
❆ PVA glue,
❆ paints or markers,
❆ thick thread
Making a New Year's mobile
1. We need 4 sheets of 40x18cm thick colored paper. Bend each sheet in half and transfer the pattern onto it.
2. Cut with scissors. We do not cut the fold line. We should have 4 clouds with a fold in the middle.
3. Open the cloud and spread it left side PVA glue.
4. Glue one more piece folded in half to the first part of the cloud, glue a narrow long ribbon in the center. Then again we will smear the left part with glue and glue the next part, and so on all four parts. We glue the last, fourth, with the first part.
5. This will create a four-sided cloud, on which we will draw snowflakes on all sides.
6. We will also transfer the snowmen to the sheet thick paper folded in half.
7. Cut out with scissors, and you get two parts for each snowman.
8. Let's paint both outer parts of the snowman with paints or felt-tip pens or use the applique technique.
9. Glue both parts of the snowman, not forgetting to insert a thick thread or ribbon inside.
10. In the middle we attach a large snowman to the cloud, and along the edges on the four sides of the cloud we make holes and fix four small snowmen on narrow ribbons.
Let's attach the mobile to the chandelier ... And now, from the light movement of the air, the snowmen will spin in an amazing round dance along with the snowflakes.
Master Class. Mobile "New Year in the Arctic"
I offer this master class for primary school children
Target: I would like to give everyone a fairy tale, and the children will show the way to it.
And what is it - mobiles. These are movable structures consisting of a system of almost weightless "rocker arms", to the ends of which light, "floating" models are attached. I suggest you make such a structure, because both children and adults will be delighted with this.
Now I’ll tell you how I did it, everyone will get it a little - a little in their own way, a little fabulous. I wish you all good luck and joy!
Materials and tools:
2. Soft pencil (HB)
3. Colored cardboard (yellow, light green, blue, dark green, white, pale blue, orange, lilac, black)
4. White paper
5. Black felt-tip pen
6. Hot pink felt-tip pen
7. White threads
9. Sewing machine
10. Scissors
Progress
Transfer the patterns of the parts to tracing paper. To do this, carefully trace all the contours of the details with a pencil.
Turn the tracing paper with the translated parts over and place it on the chosen colored cardboard. With a pencil again, but on the back side, draw along all the lines, firmly pressing the tracing paper to the cardboard.
All toy parts are double-sided for the mobile, so they are prepared in 2 copies. Therefore, place the template on the required base, and translate the contours with a pencil as many times as required.
Make templates for all the details of the snowmen, for each snowman, prepare in double the number of heads, hats, scarves and noses.
Place scarves on both sides of the snowmen. Then secure the heads on both sides above the scarf. Glue the scarf knot, nose, and hat on both sides.
Prepare parts for the bear and penguin in duplicate. Glue on bear details
Glue the thread between 2 pieces, leave more thread on the bottom.
For a penguin, glue a white belly and a yellow beak on 2 sides
Paint the eyes with white paint and leave to dry. Then take a bear with a thread and glue the penguin so that the thread remains inside the penguin
Cut out the clouds and the tree 4 times. Put on top of each other the parts of the cloud and the Christmas tree, made in 2 copies, glue from the beginning
