Pullover with a mesh pattern knitted across. Mesh pullover Knitting for women mesh pullover

Mesh patterns are ideal for knitting summer blouses , tops, T-shirts. This loose-fitting pullover is knitted in a mesh pattern using cotton yarn. This knitted blouse it will be in the summer basic thing in your wardrobe, as it goes well with jeans, light trousers or a skirt.

Sizes: 36-40 (42-46) 48/50
Differing data for sizes 42-46 are given in parentheses, for sizes 48/50 - after brackets. If only one value is specified, it applies to all specified sizes.

You will need: 350 (400) 450 g light blue (col. 15) Lana Grossa LAVATO yarn (65% cotton, 35% polyamide, 120 m/50 g); straight knitting needles No. 4.5 and No. 5.5; circular knitting needles No. 3.5, 50 cm long.

Knotted edge: 1st st. Remove each row as faces. Knit the last stitch of each row.
Knit the edges of all parts with knots.
Facial surface: persons r. - persons p., out. r. - purl p. In circular rows, knit only faces. p.

Mesh Pattern: knit according to the pattern.
The numbers on the right outer edge indicate persons. r. In purl. r. knit loops and yarn overs. In width, start with loops before the 1st arrow, repeat 4 stitches of rapport between the arrows, finish with loops after the 2nd arrow. After and before chrome. there are 2 p. persons each. iron. Repeat 1-4 rows in height.

Knitting density, mesh pattern, knitting needles No. 5.5: 17.5 sts and 26 r. = 10 x 10 cm.

Description of knitting a blouse with knitting needles:

Back with 1/2 sleeves: on knitting needles No. 4.5, cast on 97 (105) 113 sts and knit for the strap with a roller of 1 cm = 3 r. persons stitch, starting from 1 purl. r. Then knit with needles No. 5.5 in a mesh pattern. After 23 (25) 27 cm = 60 (68) 70 rub. knit from the bar on both sides to form a kimono at the beginning of the row after the 3rd stitch, at the end of the row before the last 3 stitches, 1 cross each. p. from a transverse thread. Perform such additions 1 more time in the 8th row. = 101 (109) 117 p. For sleeves, re-cast on both sides in the next 8 p. 4 p., then in every 2nd r. another 2 x 4 sts = 125 (133) 141 sts. Include the loops added on both sides according to the pattern in the mesh pattern, continuing to knit 2 sts along the edges of the sleeves. satin stitch After the last increase, knit straight for the width of the sleeves.
After 17 (19) 21 cm = 44 (50) 54 rubles. from the beginning of the sleeves, close on both sides for bevels of the sleeves - shoulders 4 (5) 5 p., then in every 2nd p. another 8x4 p. and 3 x 3 p. (11 x 4 p.) 4 x 5 p. and 7 x 4 p. Simultaneously with the 10th decrease for the bevels of the sleeves - shoulders, close the middle 15 p. and both sides for the neckline finish separately.
To further round the neckline, close the inner edge in every 2nd r. another 2 x 5 sts. This will complete all the loops.

Front with 1/2 sleeves: knit like a back with 1/2 sleeves, but with a deeper neckline. To do this, with the 4th decrease for the bevels of the sleeves and shoulders, close the middle 15 sts and finish both sides separately.
To further round the neckline, close the inner edge in every 2nd r. another 5 x 2 sts. This will complete all the loops.
Assembly: make seams. Using circular knitting needles No. 3.5, cast on 96 stitches along the neckline and knit 4 circular stitches for the placket. persons satin stitch
Then loosely close the loops.

Openwork knitting boasts innumerable and inexhaustible variety. There are so many patterns and variations nowhere else. It is impossible to remember all the patterns. It would seem, how can you diversify the appearance of the grid? The grid is just that: a grid. But that was not the case, there are many options for the mesh pattern and each has its own nuances. Change the scheme a little, and before your eyes there is already a completely different openwork mesh - for example, a dense mesh, or a large lattice. Every craftswoman must know several patterns openwork knitting, because what kind of openwork you choose will ultimately depend on exactly how it will look knitted pullover or a jacket.

Option #1

Repeat of three loops, plus edge loops.

Description of mesh knitting from three repeats:

Cast on nine stitches, plus two edge stitches.

remove the edge;
*knit three faces;
insert the left knitting needle into the first knitted one and throw it on the second and third knitted ones;
yarn over;
repeat with *;
knit the edge purl.

knit everything purl.

remove the edge;
one person ;
yarn over;
knit three faces;
the first of three persons. throw on the second and third;
repeat with yarn over;
two persons;
The edge is knitted purlwise.

purl everything.

Repeat the rapport from the first row.

Option No. 2

The number of loops is a multiple of four, plus two edge loops.

Example for 16 loops

knit according to the pattern.

remove the edge;
*two persons together;
two yarn overs;
remove one loop unknitted onto the right knitting needle, knit the next one and pull the previous one through it;
repeat from * to the end of the row.

knit according to the pattern, knit yarn overs.

one person;
* purl two;
two crossed;
purl two;
repeat from * to the end;
finish persons and edging.

according to the drawing.

according to the drawing, capes for faces.

The special charm and great popularity of mesh is that it can be used in absolutely any type of sweaters, jumpers, pullovers and it doesn’t matter whether it’s a summer or winter item

Pullover mesh

The pullover is knitted quickly, which brings additional pleasure from the work.

To knit sizes 38-42 you need:

seven skeins of thread, 50 grams each, two hundred meters each skein (composition: 85% cotton, 15% acrylic);
knitting needles: No. 45; No. 5 and circular No. 4.5;
centimeter.

Types of matings:

facial surface;
purl stitch;
grid pattern.

Grid diagram

2 loops tilted to the left (slip the first unknitted knitting stitch onto the right knitting needle, knit the second one, pull the first through the second);
2 yarn overs;
Knit 2 together.

yarn over;
2 knits together;
two facial ones with a slant to the left;
Yarn over

facial;
purl three.

on knitting needles No. 4.5, cast on 110 loops;
1 - 1.5 cm knit purl stitch;
take knitting needles No. 5, knit 3 rows;
switch to a mesh pattern and knit 47 cm;
for the neck, leave 24 loops open in the center;
in each 2nd row, cast off 4 loops once and two loops once;
53 cm from the beginning of knitting, close the shoulder loops.

Before:

knits like the back;
knit 44 cm to the neckline;
leave 16 central loops open;
in every second row, bind off four loops once, then two each once, then one each three times, and after four rows bind off another loop.

Sleeves:

Cast on 42 stitches on circular needles;
Purl 1 cm;
switch to needles No. 5 and knit three rows in stockinette stitch;
switch to grid pattern;
knit 34 cm.

Assembly:

sew both parts;
sew in sleeves.

Neck:

Open neck loops are knitted in the round using 1.5 cm stitch.

Summer openwork half-over (with short sleeves)

For size 42-44 you need:

thread 200g, 400 meters (composition: 100% cotton);
knitting needles No. 4.

Mesh Pattern Scheme:

2 persons together;
2 yarn overs;
2 persons together.

knit according to the pattern;
Yarn overs are knitted like this: the first yarn over is purl, the second yarn over is knitted behind the back wall.

yarn over;
2 knits together;
2 knits together;
Yarn over

purl all;
Knit yarn overs as in the second row.

cast on 76 loops + 2 edge stitches;
knit two rows in stockinette stitch;
then knit in openwork stitch - 34 cm.

Sleeve set:

Neck:

Knit 40 sts according to the pattern;
close the next 38 p.;
knit the remaining 40 stitches and turn the work;
when knitting a shoulder, to round the neck, make nine decreases, one loop at a time, leaving the shoulder loops open;
repeat the same with the second half of the product

knit the loops of one half and cast on the number of all closed loops, then knit the second half (there should be 78 +20+20 on the knitting needle);
continue knitting with the main openwork pattern;
knit the second half of the sleeve and close (in the front row close the loops of one sleeve, and in the wrong row close the stitches of the second sleeve);
knit with a mesh pattern to the end (34 cm);
finish with two rads of stockinette stitch.

Sew side seams and sleeve seams

Tie the collar of the pullover in any favorite way

Original pullover

The originality of a pullover begins with the knitting method. It should not be knitted from bottom to top, but from sleeve to sleeve. The sleeves are very wide, which gives a regal look to the wearer of the pullover.

For knitting you will need:

thread 100g/400m (composition: viscose);
knitting needles No. 2.5.

Main pattern:

1р: facial;
2 r: purl;
3 p: purl two together; one yarn over, to the end of the row;
4 r: purl;
5 r: facial;
6 r: yarn over, knit two together.

The front and back are knitted the same way:

Cast on the number of loops so that the width is 35 cm and knit 140 cm with the main pattern.

Knit the upper and lower cuffs with a 2×2 elastic band.

upper cuff (length - 50 cm, width - 8 cm);
lower cuff (62 cm and 10 cm).
cuffs can be knitted directly with the main fabric or knitted separately and connected to the main product

Openwork knitting is always fashionable and will remain so. Suitable for any age. Always relevant because things look feminine and elegant.

Tips for knitting an openwork women's pullover

Pattern 1: elastic band (even number of loops) = between the edges, constantly knit 1 knit stitch, 1 purl stitch.

Pattern 2: mesh pattern (the number of loops is a multiple of 4 + 2 edge loops) = knit according to pattern 1. It shows the front and back rows. Start with 1 edge stitch and loops before the repeat, repeat the repeat all the time, finish with loops after the repeat and 1 edge stitch. Repeat rows 1-4 constantly.

Pattern 3: pattern of openwork stripes (the number of loops is a multiple of 3 + 1 + 2 edge loops) = knit according to pattern 2. It shows a front and back row. Start with 1 edge, repeat the repeat all the time, finish with a loop after the repeat and 1 edge. Repeat rows 1 and 2 constantly.

Knitting density: pattern 2 - 12 p. x 21 r. = 10 x 10 cm; pattern 3 - 15 p. x 24.5 r. = 10 x 10 cm.

Attention: pullover knit in one piece across, starting from the left sleeve. Arrow on pattern = knitting direction. Attention: due to different knitting densities, the height of the front and back in the area of pattern 3 is narrower than in the area of pattern 2.

Description of withering openwork pullover knitting needles: on knitting needles No. 4.5, cast on 50 stitches and for the bar, knit 8 cm with pattern 1. Continue working on knitting needles No. 5 with pattern 2. After 14.5 cm = 30 rows from the bar, continue working with pattern 3, while to balance the pattern in 1- m row add 1 loop = 51 p. After 15.5 cm = 38 rows from changing the pattern, continue working with pattern 2, while in the 1st row again decrease 1 loop = 50 p. After 9.5 cm = 20 rows from the change pattern, cast on for the side edge on both sides 1 x 33 new stitches = 116 stitches and continue working as follows: edge, 25 stitches with pattern 3, 64 stitches with pattern 2, 25 stitches with pattern 3, edge. After 22 cm = 46 rows from changing the pattern (measure in the area of pattern 2), divide the work for the neck in the middle and leave the last 58 stitches for the front for now. On the first 58 loops, continue knitting the back, while closing along the edge of the neckline in the 1st row 1 loop = 57 stitches and continue working as follows: edge, 25 stitches with pattern 3, 30 stitches with pattern 2 (do not perform loops after rapport), edge. After 34 cm = 71 rows (measure in the area of pattern 2), the middle of the back is reached. Then continue knitting the piece as follows: after 46 cm = 96 rows from changing the pattern (measure in the area of pattern 2), leave the loops - here the end of the neckline is reached - and on the remaining 58 loops, continue working for the front according to the pattern, while simultaneously closing along the edge of the neckline 1 x 3 p., then in every 2nd row close 2 x 2 p. = 51 p. After 34 cm = 71 row from changing the pattern (measure in the area of pattern 2) or after 21 cm = 51 row from the side edge ( measure in the pattern area 3) the middle of the neckline has been reached. Then finish the neckline in a mirror image, with the decreases becoming increases. After 24 cm = 50 rows from the beginning of the neckline (measure in the area of pattern 2), cast on the remaining back loops on the knitting needles again, connect both parts using an intermediate cast-on of 1 loop and finish the right half of the pullover in a mirror image on all 116 loops.

Assembly: for the strap, cast on 100 stitches on circular needles along the edge of the neckline and knit with pattern 1 in circular rows. If the strip is 8 cm wide, close all the loops and hem the strip halfway inside. The bottom seams of the sleeves are made with front side using 1 row st. 6/n. For the lower sleeve panels, cast on circular knitting needles from st. b/n 72 loops each and knit 8 cm with pattern 1. Then close all the loops according to the pattern. Sew the side seams, while at the top, grab the short sides of the sleeve strips.

Spring is just around the corner, so we offer this delicate shade first foliage. Mesh creates a spring mood. Scheme and pattern for knitting a pullover on knitting needles.

Dimensions: 32/34, 36/38, 40/42, 44/46 and 48/50
You will need: 650/700/750/800/850 g yellow yarn Schachenmayr CATANIA GRANDE (100% cotton, 63 m/50 g); knitting needles No. 4 and No. 4.5.

Elastic band 1/1: knit alternately k1, p1.

Facial surface: persons r. - persons p., out. r. - purl p.

Main pattern: knit according to the pattern. Persons r. read from right to left, purl. r. - from left to right. Start with chrome. before rapport, repeat 2 points of rapport, finish with edge. after rapport. Repeat 1st and 2nd rows.

Decrease 1 p.: from the right edge of the edge, knit 3, 2 sts together, knit 2, from the left edge 2 stitches together (= remove 1 st as a knit, knit 1 and pull it through the removed loop), knit 3, chrome

Decrease 2 p.: from the right edge of the edge, knit 3, 3 stitches together, from the left edge 3 stitches together with a broach (= remove 1 stitch as a knit, 2 stitches together and pull the resulting loop through the removed one), 3 persons, chrome

Knitting density, main pattern, knitting needles No. 4.5: 19 p. and 20 r. = 10 x 10 cm.

Back: on knitting needles No. 4, cast on 80/90/98/108/118 sts and knit with 1/1 rib, starting with 1 purl. r. and after chrome. from purl 1, knit 1. After 6 cm, continue knitting on needles No. 4.5 with the main pattern, while doing 39/44/48/53/58 repeats in a row.

At a height of 37 cm from the start of work, close 2 sts on both sides for the armholes and knit as follows: edge, 4 sts. satin stitch, 66/76/84/94/104 sts of the main pattern, 4 sts. iron, chrome

For raglan bevels in every 2nd r. decrease 17/18/20/22/24 times alternately by 1 or 2 p. (see instructions for decreases), for this in the 2nd p. decrease 1 p. and in the 4th p. 2 p. At a total height of 55/56/58/60/62 cm, the remaining 26/32/34/38/42 p. can be loosely closed.

Before: knit as for the back, but for raglan bevels, decrease every 2nd r. only 14/15/17/19/21 times alternately 1 or 2 p. according to the instructions for decreases. At a total height of 51/52/54/56/58 cm, close the remaining 34/42/44/48/52 stitches freely.

Right sleeve: on knitting needles No. 4, cast on 52/54/56/58/60 sts and knit with 1/1 rib, starting with 1 purl. r. and after chrome. from purl 1, knit 1. After 6 cm, continue knitting on needles No. 4.5 with the main pattern, while performing 25/26/27/28/29 repeats in a row.

For sleeve bevels in the 13th row. from the bar, add 1 p. on both sides, then in each 18/14/10/8/6th r. another 2/3/4/5/8 x 1 p. and in every 16/12/8/6/4th p. another 1/1/2/3/2 x 1 p. = 60/64/70/76/82 p.

After 49/48/47/46/45 cm from the start of work, close 2 stitches on both sides and continue knitting as follows: edge, 4 stitches. iron. 46/50/56/62/68 sts of the main pattern, 4 sts. iron, chrome

Then for raglan bevels in every 2nd r. decrease 14/1517/19/21 times alternately by 1 or 2 p. according to the instructions for decreases, for this in the 2nd p. decrease 1 p. and in the 4th p. 2 p. = 14/16/16/16/16 p.

Then close from the right edge in every 2nd r. 1 x 3/4/4/4/4 p., 2 x 2 p. and 1 x 3 p., from the left edge of the decrease for the raglan bevel, perform 3 more times. All loops will be closed.

Left sleeve: knit symmetrically to the right sleeve.

Assembly: sew raglan seams, side seams and sleeve seams.

Sizes: 34/36,38/40 and 42/44. Differing data for sizes 38/40 and 42/44 are given in parentheses, sequentially separated by a dash. If there is only one number, then it applies to all three sizes.

You will need: yarn (58% merino wool. 38% silk. 4% polyester: 150 m/50 g) - 500 (550-600) g black: circular knitting needles No. 6 and 10, 80 cm long: circular knitting needles No. 6, 40 cm long.

Rubber: alternately 2 knits and 2 purls.

Facial surface: front rows - front loops, purl rows - purl loops.

Mesh Pattern: knit according to the given pattern. Read the front rows from right to left; in the purl rows not shown in the diagram, knit purl loops. After chrome. repeat 2 points of rapport between the arrows, ending with the edge. Repeat in height from the 1st to the 4th row.

Knitting density: 10 p. x 16 r. = 10 x 10 cm. Knitted in a mesh pattern using knitting needles No. 10.

Attention: The product is knitted in 2 threads.

Back: With a double thread, cast on 70 (74-78) sts on needles No. 6 and knit with an elastic band, starting from the purl row: edge .. 1 knit .. 2 purl .. finish the row symmetrically. After 4 cm = 11 r. from initial row 2 r. knit knitting needles No. 10. Moreover, in the 1st r. evenly decrease 10 stitches. To do this, knit 2 stitches together = 60 (64-68) stitches on knitting needles. Continue working with a mesh pattern. After 40 cm = 64 r. from the elastic make on both sides for armholes according to the mark. Continue knitting at a height of 20 (21-22) cm = 32 (34-36) r. from the marks, close the middle 28 (30-32) stitches for the neckline and finish both sides separately. To round the neckline, close from the inner edge in every 2nd r. 2 more times, 1 p. At a height of 68 (69 - 70) cm from the bottom edge, bind off the remaining 14 (15-16) p. shoulder. Finish the second side symmetrically.

Before: 5 cm shorter and 4 cm wider than the back. Therefore, in finished product The shoulder seams are shifted toward the front, the side seams toward the back.

Using a double thread, cast on 74 (78 -82) sts on needles No. 6 and knit with an elastic band, starting from the purl row: knit 1, purl 2, finish the row symmetrically. After 4 cm = 11 r. from the beginning row 2 p. knit with knitting needles No. 10. at the same time in the 1st r. evenly decrease 10 stitches. To do this, knit 2 stitches together = 64 (68-72) stitches on knitting needles. Continue working with a mesh pattern. After 40 cm = 64 r. from the elastic make on both sides for armholes according to the mark. Continue knitting at a height of 13 (14-15) cm = 20 (22-24) r. from the marks, close the middle 28 (30-32) stitches for the neckline and finish both sides separately. To round the neckline, close from the inner edge in every 2nd r. 1 more time 2 sts and 2 times 1 st. At a height of 63 (64-65) cm from the bottom edge, bind off the remaining 14 (15-16) sts of the shoulder. Finish the second side symmetrically.

Sleeves: cast on needles No. 6 with a double thread of 32 stitches and knit with an elastic band, starting from the purl row: edge, k1, purl 2, finish the row symmetrically. After 3 cm = 7 r. from the beginning row 2 p. knit with knitting needles No. 10. at the same time in the 1st r. decrease 10 sts evenly. Continue working in a mesh pattern. B10 (10 - 8th) r. from the elastic, add 1 p. for bevels on both sides, then in every 10 (8-8th) p. another 5 (6-7) times 1 p. = on knitting needles 44 (46-48) p. After 43 cm = 68 r. From the elastic band, close all the loops in one row. Knit the second sleeve in the same way.

Assembly: Pin the details onto the pattern, moisten and leave until dry. Sew shoulder seams. Using short circular needles No. 6, cast on 76 (80-84) stitches along the edge of the neckline and knit 6 rows in the round. with an elastic band. Then close the loops. Sew side seams and sleeve seams. Sew in the sleeves, placing them slightly at the top of the collar.