How to beautifully rip jeans at home. How to make beautiful holes and a worn effect on jeans with your own hands. Video: how to make fashionable ripped shorts

Anna Turetskaya

Reading time: 14 minutes

A A

Every second girl experiments with things from her wardrobe. Especially if things are already old, unfashionable and require either disposal or urgent upgrading. The second option is certainly preferable.

You probably have a stack of jeans lying around in the far corner of your dresser that you hate to throw away.

We'll show you how to make them relevant and fashionable again!

What you will need: your old jeans, a seam ripper (blade or knife), soap and a small metal grater with garlic holes.

We choose a place for the future “scuff” on the jeans.
Carefully rub this area horizontally with a grater. We act as carefully as possible if desired result- this is precisely abrasion, and not a gaping hole. The grater should only be removed top layer thread

For the holey effect:

We lay out the jeans on the table and mark the stripes with soap (maybe chalk) for future holes.
We make horizontal cuts using a seam ripper or scissors.
We pull out a few threads along the edges of the holes to make the jeans feel “worn” (note - or we wash them in the machine so that the threads stretch out on their own) - we create the shaggy appearance of our chaotic holes.
We make cuts based on our wishes - in several areas or immediately along the entire length of the trouser leg(s).
If desired, you can decorate the resulting holes using one of the following methods (lace, sequins, etc.).

To prevent the created “holes” from spreading completely and spoiling the presentation, you should sew guipure scraps to them from the inside out.

Bright colored space jeans - dye according to instructions

For this masterpiece you need: dark jeans, toothbrush, acrylic paint for fabrics of the desired colors, sponge, spray bottle, bleach and water solution (2:1), container for mixing paints.

We spread the jeans on top of the film on the floor.
We spray the bleach solution poured into the spray bottle on various areas - not copiously, but a little at a time and carefully. We are waiting for orange spots to appear. To increase their intensity, you can spray one more time.
Next, mix the first portion acrylic paints and with a sponge we carefully apply it exactly around our orange spots. Let's experiment with colors! That is, we rinse the sponge from time to time and take a different color.
We highlight individual areas with white paint.
We paint the stars in our denim “galaxies” using a brush and diluted white paint. Everything is simple here: we dip the tooth/brush in the paint, and then, using our finger, we “spray” (splatter) the paint onto individual areas - we create clusters of stars.
Don't forget about the back of the jeans and the seams - they also need space. Wait until it dries completely (at least 24 hours).

Stylish “varenki” - if jeans have become “boring”

You will need: old jeans, whites, containers (a bucket or a large pan that mom won’t tear her hands away from later).

We choose dark jeans that are in dire need of a “fashion reboot.”
We twist our jeans tightly. Moreover, the more you twist, the fewer streaks there will be. If you want a vertical pattern, then secure the twist sections well with rubber bands. For horizontal twists, you need clamps, and for the “stars” in the twist areas, you need clothespins.
We fill a container with water - exactly half, heat it to 80 degrees (on average) and suddenly pour a full glass of white into it.
Bring our solution to a boil, stirring constantly.
After the “potion” boils, immerse the jeans completely in it. Are they getting out? Push it back with a ladle.
We wait 15 minutes, constantly pushing the jeans under the water. If the color does not want to change at all, add another half glass of the product.
We take it out after receiving it the desired shade, take it to the bathroom, remove all the clips/elastic bands and thoroughly rinse the new jeans.

If you are too lazy to cook jeans, your mother won’t give you a pan, or you simply don’t have the necessary container, but you have Domestos - use it. We dilute half a glass of the product in 3 liters of water, soak the rolled jeans in the same way and wait for the lightening. Next, rinse and dry.

And - another way, more gentle

Alas, the resulting pattern as a result of the above method does not always bring joy. If you don't want to be upset, you can use using the following method:

Treat the desired areas of the jeans with a sponge soaked (thickly) in bleach.
Forget about jeans for 5 minutes (no more!).
If you want a gradient, you can spray more intense areas with a spray bottle.
Next, rinse the jeans and dry them.

Decorating jeans with lace - stylish and glamorous

Today this is the most fashionable option finishing.

You will need: old jeans with very large holes (for example, jeans in which you overdid the holes) and lace. You can also use regular jeans if the decor is external.

What options are there?

Lace sewn as a lining on the hole from the inside out. The denim edges around the lace patch, of course, need to be ruffled. White lace sticking out in the slits of blue jeans looks very piquant.
A lace ribbon sewn around the waist or just the front (only the back).
Back pockets completely decorated with lace.
Flowers cut out of lace (another pattern), sewn onto trouser legs like appliqués.

Just don't overdo it. An abundance of lace or its illiterate use can turn your jeans into a vulgar item.

What you will need: rhinestones, beads, beads, your jeans.

We select the desired area on the jeans, look for the desired pattern and transfer it to the jeans with chalk/pencil (pockets, sides of the legs, cuffs).
Choosing rhinestones different sizes and glue them according to the pattern manually.

Sequins, beads or beads will have to be sewn on. The work is more painstaking, but the result is worth it.

If you don’t know how to draw, take drawings as a basis (among them there are many interesting sketches of flowers, birds, etc.).

And the jeans have cuffs!

Today, wide cuffs on jeans are considered the most fashionable. Although no one will stop you from making them according to your personal size and desire - you are a designer.

Having chosen the desired width, stitch the jeans or simply roll them straight out, baste along the seams and start decor of the received cuffs:

Decorate with rhinestones or beads.
Sew on the lace.
We use bright strips of fabric.
Making fringe.

Stamps are not always bad

If a bear stepped not only on your ear, but also on your hands, and you only know how to draw with chalk on the asphalt, it’s not a problem. They will come to the rescue stamps and stencils.

We take an ordinary children's rubber stamp for creativity with the desired pattern, dip it in fabric paint of the desired color and stamp it for health in the way your soul requires.
If there are no children's stamps, you can make it yourself from a potato, an eraser, etc.
You can also stamp with a sponge. Just use thicker paint and first test stamping on an unnecessary piece of paper so that the excess paint comes off the sponge - the design should turn out to be a fine snowball, not blots.

Stencils are also a good idea.

We draw a pattern on cardboard, cut it out, and attach it to the jeans with masking tape.
Apply the design with a brush or sponge.
Wait for it to dry and remove the stencil.

Drawing on jeans - an option for artists

Option 1:

We take fabric paints and brushes.
Apply the pattern with chalk, paint it, wait for it to dry.
You can use felt-tip pens for fabric (it’s even more convenient to draw with them).

Option 2:

We insert cardboard into the leg to protect the other side.
Place lace over the desired section of the leg and fasten it tightly with pins.
Using a sponge, toothbrush, or dotted by hand, paint the pattern through the lace and wait for it to dry.

Option 3:

We cut out the desired pattern from the lace and soak it in bleach until slightly damp (so that the lace does not crumble).
Place the lace on the trouser leg and press tightly for 10-30 minutes. Accordingly, the longer, the brighter the picture.
Next, remove the lace and briefly dip the jeans in a solution of water and vinegar (approx. 3:1). Afterwards, wash separately in a machine or by hand.

Jeans turn... into elegant capri pants

Everything is simple here. If you are tired of flares, or the bottoms of your trouser legs have become completely unusable, then it’s time to cut your jeans into capri pants (or shorts).

Select the desired length with a margin for cuffs.
Cut along the strips marked with soap.
We bend the legs outwards and decorate them using one of the above methods (fabric, lace, beads, etc.).

Applique patches are at the height of fashion!

If you are young, daring and have golden hands, you can use appliqués. They transform old jeans so much that then people they know ask where to buy this beauty?

There are many options - choose to your taste or look for something unique:

Bright rectangles made of multi-colored and multi-textured fabrics, randomly sewn onto the front legs of the trousers.
Applications using colored laces.
Applications in graffiti style.
“Dot” applications in the form of hearts, letters, patches, etc.
Using colored thin leather or denim different shades.

You can also sew on appliqués. in different ways- from a regular stitch to a zigzag or even a satin stitch contour.

Embroidery on jeans is painstaking and time-consuming, but beautiful and durable

If you can surpass even your grandmothers in needlework talent, and you have a box full of floss, feel free to look for the desired pattern.

Apply the pattern to the desired area.
We embroider. It’s better to use satin stitch, it looks more impressive. Although, you can also use the cutwork technique, but in this case it is not recommended to experiment with colors - take 1 color of thread slightly lighter than the jeans fabric.

If desired, you can make voluminous flowers on jeans from threads:

We make loops around 2 fingers, remove the skein and tie it in the middle with a contrasting thread.
We cut off the ends, fluff our “dandelion”, and sew it to the jeans.
From below we embroider a stem with leaves.

Rivets on jeans are a timeless fashion

First, come up with a pattern or think about the geometry along which you will “screw” the rivets. If during the decorating process you realize that you have done “wrong” and “wrong”, it will be extremely difficult to correct.

We buy rivets in the store (those with “petals” on the inside).
We pierce the fabric with a rivet and bend the petals. If the jeans are too thick, make mini holes in advance.
Rivets will look most advantageous on side seams, pockets, waistbands or cuffs.

Ways to breathe new life in my old jeans - a carriage and one small cart. Based on the above, you can come up with your own techniques and create a real masterpiece.

Remember: “hand-made” is valued at all times! You can even organize your own.

An exclusive item can make you stand out from the crowd and make you the object of admiring glances. You don’t have to pay exorbitant sums for individuality. To become the owner of unique jeans, you can decorate any model you like yourself.

Today we will learn how to make ripped jeans at home, which will not be inferior in their sophistication to a pair from the most famous brand.

First, let's decide on the number of holes and their location. Equally important will be the size of each hole, as well as its type.

It could be:

through hole– a piece of fabric of any shape is simply cut from jeans;
hole– not such an obvious hole, horizontal threads remain in the hole, which play the role of “filler” of the hole;
attrition- a frayed area framed by small fringe, which is not essentially a hole; these jeans can be worn comfortably even in windy weather.

Which jeans should you choose?

There is an opinion that making holes in jeans is a great way to give new life to an old or boring item. Bored - yes, but if your jeans are frankly worn (elongated knees, faded denim), then artificially created holes are unlikely to save them.

On the contrary, the item will look as if it is long overdue for the trash bin. After all, we are creating an exclusive wardrobe item, and not trying to save a “dying” couple.

It is best to buy new jeans by choosing their size, choosing the model and color you like.

But you can practice on old jeans that are ready to be thrown away, because creating decorative holes is not such a simple matter, and it may not work out the first time. Please note that if you choose holes to decorate your jeans, then they should not have rhinestones, appliqués or embroideries.

How to wear different holes on jeans?

Hole-through jeans are the boldest option and often look like you needed a piece of fabric to patch something else.

It is best to combine updated jeans with this item. Sew a cut-out piece of denim onto a textile bag or jacket to create a full-fledged suit.

Jeans with rips look the most familiar; they are combined with grunge-style items, pumps and translucent blouses. These jeans are perfect for creating a casual look.

The rips maintain the visible integrity of the jeans, while flirtatiously exposing areas of skin. You can complement the hole with a piece of lace or colored fabric, sewn from the inside out - the jeans will sparkle in a new way.

Distressed jeans can easily replace regular jeans. They can be combined with a variety of things and shoes, but the amount of decor on the remaining elements of the look should be minimal. In a sense, abrasions resemble stains randomly scattered across the fabric of trousers, so it is better to choose a plain top.

Making holes - option 1

Having decided on the location of the future hole, take a utility knife and make two parallel horizontal cuts. To avoid damaging the fabric on the opposite side of the leg, place a piece of plywood under the work area.

Having examined the fibers of the fabric, you will see that parallel to the cuts there are white threads - we will leave them, and perpendicular to them - blue (or another color - the color of the jeans you have chosen), they need to be carefully pulled out with nail scissors.

To ensure that the hole retains its aesthetic appearance, cover it from the inside with non-woven material and sew the edges. This way you can create holes of any size and shape. Several horizontally elongated holes, located one under the other, look interesting; they can even be made along the entire length of both legs.

We tear beautifully - option 2

We mark the area of the future hole and make several horizontal slits with a stationery knife at intervals of no more than 1 cm. Next, use the tip of nail scissors to separate the white threads, working carefully so as not to tear them.

All that remains is to use a stationery knife to scrape off the small scraps of blue vertical threads - this is done quite easily. Upon completion of work, clean the hole and the entire surrounding area with a vacuum cleaner.

Creating abrasions

Back in the 80s, scuffs on jeans were made with a piece of ordinary building brick. We will take more sophisticated tools - a fine kitchen grater or pedicure grater, pumice stone, sandpaper.

First, use a grater to carefully create abrasions, then use a pumice stone to make this area “fluffy” and natural. Sandpaper will help to slightly age the item. It is better to carry out such manipulations with damp cloth– otherwise there will be a lot of textile dust.

The location of the future hole can be pre-whitened, then the hole will become a real decorative element and will not create the feeling that the jeans were accidentally damaged. Moisten the designated area of fabric with bleach or bleach solution and leave for several hours, then wash and start creating a hole.

But you need to wash jeans with ready-made holes carefully - by hand or using a special mesh bag for delicate washing. With intensive washing, the tear will turn into an unplanned hole, and the item itself will become unusable.

It is better to bleach holes on jeans in yellow-swamp shades or gray-blue versions. Saturated jeans blue not suitable for this.

Follow our advice and boldly decide to create unusual wardrobe items in the form of ripped jeans. After all, sometimes it’s so difficult to stand out from the boring crowd without looking wild and tasteless.

Let's watch the master class. How to make ripped jeans at home

Ripped jeans are back at the peak of popularity! With their help you can become not only daring, but also romantic beauty! The main thing is to choose the right design and the right holes. On fashion shelves shopping centers you will find hundreds stylish models. But if they aren't to your taste, don't despair! You can always make super trendy ripped jeans yourself. And this material will help you!

How to make your own ripped jeans at home

If you have old or new jeans that you want to transform, that's great. This handicraft will not take much time, but the future new thing will definitely be unique and non-standard. Making ripped jeans at home is not so difficult, but there are many schemes and technologies. You don’t have to take cutting and sewing courses, but you need to stock up on patience, tools, and imagination.

Tools that will be needed during the work

To transform unsightly jeans and make scuffs on them, you need to prepare holes:

*Jeans (it is allowed to take trousers from a different material, but the technology for processing them is slightly different);
*Scissors (preferably for fabric - large, sharp);
*A small grater, razor, file or sandpaper (if abrasions are expected in addition to holes);
*A stationery knife or blade (it is acceptable to replace this tool with regular nail scissors, but you will have to be more careful when working with jeans);
*Additional pieces of fabric, lace (if a beautiful feminine decor is intended and sewing it under a large hole as an internal patch);
*Chalk, pencil or pen (to mark the locations of future holes in jeans);
*Needle or seam ripper (will help pull out unnecessary threads);
*Tweezers or vacuum cleaner (to quickly remove excess threads);
*Small sewing needles or paper clips (for fixing patches on jeans).

Scheme

First, determine the places where the holes and slits will be made. Analyze the denim of the trousers. If it is worn out, then the holes should be small and in those parts where bends are not expected (above or below the knees, on the back pockets of each pant leg).

If the material is new and is not bursting at the seams, then the shape, placement, and size of the holes can be any. In the first option, they will be easy to do, and you can even pull out the threads by hand, but in the second case, you will definitely need a fabric ripper.

To outline future locations for holes, try on your jeans and start with the places where the bends, knees, and buttocks end. When you take off your pants, these marks will help you accurately determine where the holes and abrasions should be. Draw their full circle, not just a point.

If the hole is of irregular shape, it is better to place it so that the largest diameter falls on the shared thread (it stretches less). Some types of sewing chalk are not washable, so a small bar of soap is a better solution.

How to tear jeans beautifully with your own hands: execution techniques

Sloppy holes in grunge style are very simple to make.

👖Stripes are cut in the selected location different lengths parallel to each other at a distance of 5 mm.

👖The transverse threads are pulled out and removed. If some of the grain threads are damaged, this will add sophistication to the trousers, but in no case will ruin them.

Ripped jeans in a minimalist style. For such trousers you will have to mark several places with small holes. The main task is not to damage the transverse threads, but to remove some of the side threads so that they do not stick out very colorfully. Such holes are often made in the size of 2 cm by 4 cm and are placed closer to the side seams of the jeans.

👖Frayed holes on trousers are used very often, especially when it comes to large hole diameters. This effect can be easily achieved using a simple kitchen grater, sandpaper or pumice stone for the feet.

The main thing in this matter is not to touch the threads that remain transverse or lobar, so that the jeans last for more than one month, a year, and the fringe does not tear after the first wash.

How to make a scuff using a grater

Ordinary kitchen utensils often come to the rescue in handicrafts. To make a hole in your jeans look old and worn, you will need a simple grater or a piece of sandpaper. Draw tightly along the edge of the hole with small jerks with the selected tool so that the threads fluff up.

Carry out similar actions with each edge of the denim hole. You can do the work both from the front side and from the back. After this, additionally bleach the threads with a chlorinated solution.

Please note that the back of jeans often looks more original than the front side. If you have extra pieces of this fabric, try making a patch like this on the front of your trousers. You can sew the patch with large stitches so that the threads are visible. Such an addition would be quite appropriate for both male species clothing, and for women.

You can create a pattern from pieces of other fabric (optional). Improve your jeans so that they can complement both a romantic, feminine look and a sporty, daring one.

Bleached holes

To make your denim look even more stylish, try bleaching some threads and areas. The easiest way to do this is with a chlorinated solution or other bleach. Dissolve ordinary chlorine in a small amount of water, apply the solution to a small piece of cotton wool or gauze and treat the necessary areas with holes.

Chlorine eats into the fabric, and whiteness may not appear immediately, but after some time. Therefore, after treatment, wash your jeans immediately, this way the excess chemical will be removed and the holes will remain in excellent shape for a long time.

When bleaching holes in jeans, it is important to carry out all work with rubber gloves and in the open air. It is advisable to test bleaching on a small piece of the same fabric or on an invisible part of trousers (below the knees, with wrong side).

If you want to decorate your jeans with white drops, then use a pipette to apply a chlorine solution to the fabric, and place a layer of cotton wool underneath. Once the chlorine is absorbed, it needs to interact with the fabric for about 1 hour, after which the clothing will need to be washed completely.

How to make shorts or breeches from regular jeans

An easy way to update old jeans is to cut them down to shorts or breeches. In this case, you need to outline the height of the future product and break it along the transverse thread.

If the shorts are intended to be made without further processing, but with torn edges, then no allowances will be required. They are necessary if, according to the model, a gate is required. For this design, add 3-7 cm to the desired length and trim off the excess. This process will look like this step by step:

✂ Lay out the finished jeans on a flat surface without folds.

✂ Mark with chalk or pencil the place where the excess length will be trimmed.

✂ We tear off the jeans along the line with our hands or with scissors.

✂ Additionally, we make holes or abrasions (optional), taking into account that the color of the longitudinal thread will be lighter than the main shade of the trousers.

✂ Fold the edge or leave it torn. Ready!

Article on the topic: “how to make ripped jeans from old ones at home with your own hands?” from professionals.

Ripped jeans are one of the most controversial items fashionable wardrobe. For some people, holey pants delight them, while for others they only cause bewilderment and irritation. However, both supporters and opponents of ripped jeans will agree that today it is one of the main trends in clothing.

Ripped jeans have not gone out of fashion for several seasons in a row, so more and more girls and young people are thinking about purchasing such an item. But the prices for such pants are no lower, and sometimes even higher, than for whole clothes, and you have to overpay for impractical, although fashion item Not everyone is ready.

The solution to this problem is obvious - make fashionable holey jeans with your own hands. Detailed instructions Read below for information on how to do this at home.

Is it possible to make ripped ones from regular jeans?

The best way to make fashionable ripped pants is from old but favorite jeans that have already become frayed, but it’s a pity to throw them away. Such jeans usually have abrasions and tears in the right places - we just need to enhance the effect a little.

We should not give a second life to pants that are already quite worn out and are in a “throw away” state, because our task is to look stylish, but neat. Therefore, it is better to immediately throw away jeans with indelible stains, holes between the legs and other defects that cannot be corrected.

If you don't have any old jeans that fit, you can try modifying new pants. It is not recommended to buy good, expensive jeans for these purposes, because the result may disappoint you.

In what places are the holes made?

To do it for real stylish thing and look perfect in it, it’s important to know right places, in which you need to make holes.

Usually holes are made on the following parts of jeans:

pockets – back and front;
belt - in this place it is better to make neat terry and abrasions, and not through holes;
pants legs are the most comfortable and most popular place; holes can be made everywhere except the knee area: in this area the fabric stretches very much and the holes quickly increase in size, so the holes should be located a few centimeters above or below the knees.

What materials are needed?

You can get beautiful holes with fringe only by using a special set of tools and materials.

If you simply cut jeans with scissors or a razor, the effect will not be at all what you expect.

Therefore, for work you need to stock up:

a small piece of plywood or thick cardboard;
a sharp knife, for example, a stationery knife;
wax chalk or soap;
sewing ripper;
a fine grater, file or piece of sandpaper;
You may also need a set of safety pins, tweezers and a vacuum cleaner.

How to make holes correctly: step-by-step instructions

First, decide on the future appearance jeans. For convenience, you can even draw a sketch on which the location of all decorative elements will be marked: holes, scuffs, patches, etc.
After this, transfer the sketch directly onto the jeans. Apply the markings directly to the front of the pants using a bar of soap or chalk. If you have a washable marker, it will be more convenient to use it.
Now we need to explore denim. Take a good look at the weaving and determine the location of the white and colored threads. It is important for you to understand which ones go vertically and which ones go horizontally. If it is difficult to determine this by eye, make a cut in an inconspicuous place and take the edge apart thread by thread.
Before you start working, place something hard under the future cut, for example, a piece of plywood, so as not to damage the other side of the jeans. The plywood needs to be pushed into the pant leg, not just placed on top of the pants!
Start cutting according to the drawn markings. Don't make the cuts too long, as they will still gradually unravel. To make the holes look “like in a store,” try to make the cut in one motion.
Now you need to give the fresh rips a stylish distressed look. For this we need a sewing ripper. Use it to carefully pull out white threads and remove colored ones. If you don't like holes covered with threads, you can simply go around the edges with a grater or nail file.
You can quickly remove thread trimmings and dust remaining after sawing using a special sticky roller for clothes or a hand-held vacuum cleaner.

Adding a worn effect

Even more interesting model can be done by adding a distressed effect to jeans.

To do this, you can use any available means with an abrasive effect:

kitchen graters;
nail files;
sandpaper;
whetstones for sharpening knives.

Just take one of these tools and begin to carefully work the denim in the desired area. Be careful not to damage the white threads, otherwise the abrasions will quickly turn into holes.

To make the abrasions brighter and look more expressive, go over them with a sponge soaked in bleach (remember that you need to work with rubber gloves, since bleach is dangerous for the skin).

Decor and decoration with lace

For those who simply find ripped jeans insufficiently impressive, we can advise you to additionally decorate them with lace inserts. The combination of rough denim and delicate lace looks very beautiful and unusual.

For decoration we will need very little lace, so if you still have scraps of lace ribbons, that’s just great. It is better to decorate light jeans with black lace inserts, and dark ones with white ones.

The lace should be sewn on the wrong side. The “patch” should be slightly larger than the hole itself. Don’t be afraid to cut out too large a fragment – after finishing the work you can easily trim off the excess.

The lace needs to be sewn along the contour of the hole with small, frequent stitches (for convenience, the patch can be secured with safety pins). Choose threads to match the lace - this way they will be less noticeable.

We all know the phrase: “Everything new is well forgotten old.” Now we can see the same thing in the situation with jeans. More precisely, with ripped jeans, which were popular in the 1980s and are gaining popularity now.

Despite the fact that they literally have holes in them and look sloppy, for some reason such jeans are very expensive.

Now you will learn how to make ripped jeans yourself at home!

Where to start?

First of all, you should take the “starting material”, in the form of a pair of jeans. Some old, “worn” jeans will also work well. Plus, they will look even better in the end than just new ones.

You need to decide on the style in which the transformation of your item will follow:

Grunge. The transverse threads are pulled out and holes are “cut”;
Minimalism. Only stretched out lobar threads. Unlike grunge, the transverse lines are not affected.

In addition, you can look on the Internet for photos of ideas on how to make ripped jeans. This way it will be finally clear in which direction to work.

If you are transforming new jeans, you need to give them a “worn” look. This is achieved by washing in very warm water, using “strong” powders

Materials

To make ripped jeans at home, you will need the following tools:

Scissors, knife or blade;
Wood processing paper (“sandpaper”), razor, nail file or grater;
Soap products or ballpen(chalk) for outline;
Tweezers;
Cardboard (for convenience);
Lace (for decorating jeans);
Needle;
Paper clips or pins.

Work algorithm

Step-by-step instructions on how to make ripped jeans begin with determining exactly where the holes will be. It is best to wear jeans directly on you and use chalk or soap to outline the areas.

Please note: if the jeans are worn, then the holes should not be too large and they should be placed only in those parts where there are no bends; If the jeans are new, then you don’t need to worry about where to place the holes.

Also remember that if the holes are in the knee area, then you need to mark and cut them a little higher than necessary.

Place the jeans with the markings on a smooth, hard surface (cardboard or a wooden board will do).

To create a torn effect, use sandpaper, pumice or a grater.

Take scissors and scrape along the edge of the slit to create a ruffled effect.

Let's move on to the holes in the denim. Using scissors or a utility knife, carefully cut holes along your marks. Try not to make big holes first, as there is a risk of “ruining” them.

Using tweezers, remove the longitudinal threads from the cuts. If it is not possible to remove all the threads, then it’s okay - this way you add more natural effect worn.

Cut out pieces of denim can also be used in an original way. They can be sewn with large stitches on the wrong side to the jeans themselves. This way the threads will be clearly visible. This “trick” can be used in both men’s and women’s jeans.

If you have scraps from other fabrics, they can also be used for decoration. Almost the same as in the previous tip, they can be sewn to the front side of the jeans. You can even create a pattern using different pieces of fabric.

There is no direct advice here - everyone has different tastes and imagination.

A few more final tips:

You should not make cuts right next to the seams. There is a risk that the seams may start to come apart.

To add an even more worn effect, after all the previous steps to “treat” the jeans, they should be washed.

If you want to make very small abrasions, then use the tip of the scissors blade.

A splash of bleach will age your jeans even more (but don't overdo it).

To make some areas whiter, use the same product as in the previous method.

You need to take chlorine, mix it with a small amount of water and apply the resulting mixture to cotton wool or gauze. Use these lotions to treat the necessary areas with holes. After all these steps, wash your jeans.

Always be fashionable and stylish!

Artificially aged denim pants have not gone out of fashion for several seasons in a row, and large number Fashionistas spend a huge amount of time searching for them every day. It’s no secret that finding perfectly fitting jeans is a problem, and if you want to buy a ripped pair that fits perfectly and matches your wardrobe, this problem increases significantly.

What to do if you are desperate to find your fashionable torn jeans or don’t want to waste time looking for them at all? The answer is simple: make them yourself from existing denim trousers.

To make jeans ripped, you can cut holes in them with scissors, a razor or a knife, and rub them with a grater, file, pumice or sandpaper. It all depends on your idea, as well as the availability of certain tools at your home.

What will you need for work?

To create ripped jeans you will need:

actually, the jeans that you decided to modify (it could be skinny, straight, flared or any other);
sharp scissors, stationery knife or blade;
tweezers;
safety razor, grater, sandpaper or pumice (to create scuffs and uneven edges).

And also:

wooden block;
any liquid bleach;
gloves for working with bleach.

How to rip jeans in style?

To make ripped jeans, you need to decide on the shape and size of the holes, mark them on the fabric, and then make many cuts within the outlined areas and remove unnecessary threads.

The work looks like this step by step:

We outline the contours of the proposed holes;
We insert a wooden block or other durable backing into the leg (so that the cuts are made only from the front part of the jeans);

Using a blade or a stationery knife (necessarily sharp), we make several cuts inside the marked area. In this case, the distance between the incisions can vary (from a few millimeters to 1 centimeter or more).

Then carefully pull out the transverse (blue) threads from the material (leave the white warp threads). Let's try it on and evaluate the result in the mirror!

This procedure is shown in even more detail in the following video master class:

The edges of the resulting holes can be sewn with stitches (if desired, they can even be done with colored threads) or glued on the inside with glue so that they do not lose their shape and do not unravel in the future.

How to decorate jeans torn by yourself?

Whitening the borders of decorative holes

To make the edges of the hole (cut) brighter and more prominent, you can perform a bleaching procedure. To do this, the edges of the finished hole need to be treated with a special bleach or white, which can be purchased at a hardware store.

Creating abrasions along the contour of holes

If you want the decorative holes on your jeans to have a disheveled outline, you need to take sandpaper (or pumice) and rub the edges with force. This will make the holes more voluminous and achieve the desired fringe effect.

Decorating holes with lace or fabric

If you prefer more original solutions, you can combine the resulting holes with lace or contrasting fabric. To do this, you just need to hem or glue the selected material on the inside of the cuts, or put original patches on the front of the legs.

How to effectively age boyfriend jeans?

You can also make ripped boyfriend-style jeans with your own hands:

Take chalk (a bar of soap or a pen), scissors and jeans that are 1-2 sizes too big for you (for a more casual effect, you can even buy them in the men's department).

Put the jeans on yourself and circle with chalk or mark with a pen the places on the legs where the cuts will subsequently be made.
Remove the trousers and use a utility knife or blade to make slits along the outlined contours (use a wooden block or board as you work so as not to cut through the back of the jeans).

Now sharp object pick up and carefully pull out the threads from the denim around and inside the finished cutouts (in bunches or one at a time) - this will make the holes on the pants more neat. If the material is dense, it is better to use tweezers.

If desired, you can additionally make through holes in your jeans by cutting out parts of the fabric and carelessly ruffling the outline of the cuts using a utility knife, razor, pumice stone or grater.

Fashionable boyfriend style jeans are ready!

If the denim trousers are not torn enough, you can try increasing the number of holes or experiment with their size by repeating the entire procedure from the beginning.

How to beautifully rip jeans at the knees?

One of the latest fashion trends is jeans that are torn or cut only at the knees. Moreover, the color of such denim trousers can be either very dark (black, dark blue) or light, and they themselves can be either super-tight or slightly loose.

The following video will tell you in detail how to make such stylish jeans at home:

How to make distressed jeans?

If ripped jeans are too extreme for you or you think they don't suit your age or spirit, but at the same time your soul craves experimentation: opt for distressed denim trousers!

You can easily make fashionable abrasions on the denim trousers of your choice at home yourself.

What will you need?

To work, you will need the same tools as for creating ripped jeans:

pen or tailor's chalk;
grater,
pumice,
fine-grained skin,
a wooden block or other durable support.

Step by step instructions

Before starting work, carefully inspect the legs, select and mark areas where future abrasions will be located.
Insert a wooden or thick plastic backing into the leg (rubbing the jeans on yourself, as shown in the picture, is strongly not recommended to avoid damaging the skin of your legs!).
Take a grater, pumice and sandpaper and use them to create abraded areas of the required intensity in the right places.

Do the same with the second pant leg.

As you work, keep in mind that a grater gives the highest abrasive effect, pumice a little less, and fine-grained sandpaper the least. And remember that the main thing is not to overdo it, otherwise there may well be full-fledged holes in the place of the supposed abrasions.

You will learn a few more secrets of decorative aging of denim trousers from the following video:

After the procedure, worn jeans should be washed. If after washing it turns out that the abrasions are not bright enough and do not stand out well against the general background, the aging effect can be enhanced by repeating the procedure from the beginning.

What to wear with ripped denim pants?

Ripped jeans are a truly versatile wardrobe item. They are able to fit organically into most modern styles clothes, with the exception of strict office and classic clothes.

These trousers will perfectly complement a grunge or military look, add informality to a casual or street look, and are also indispensable when creating sports-style looks.

As for shoes, it’s much harder to think of what stylish ripped denim trousers won’t go with than what you can wear them with.

They harmonize perfectly with both pumps and high heels, as well as sneakers, flip-flops, suede ankle boots and even heavy lace-up boots. It all depends on your character, physique, clothing preferences, imagination and where you are going to wear them.

Every person who follows fashion at least a little wants to know how to make ripped jeans, which have once again taken off on the fashion Olympus. You don’t have to go to a boutique to find a sophisticated style, full of designer scuffs and holes. To create a fashionable holey handmade item from tired, old jeans, scrap materials will be used. Today we are learning to understand the science of artificial aging of jeans.

Correct workpiece style

Before we move on directly to the process, let’s go through our wardrobe in search of exactly the thing that is ideal for experimentation.

Cross regular fit jeans off your list. Such wardrobe elements will look old-fashioned, and holes in the fabric will seem like the result of an unfortunate fall.
Stretch pants will also be unsuccessful. The stretchy material will not physically produce beautiful cuts, and the holes will resemble arrows on nylon tights.
Very thick fabric will make the process of turning pants into a fashion item quite labor-intensive.

Prints, embroideries and designs, as well as bright patterns look interesting, but additional elements overload the overall composition.
Ideal candidates for transformation are narrow or wide pants, like boyfriend pants. These trousers for young people perfectly withstand all the “bullying” of themselves, without turning into the clothes of a homeless tramp.

Most people try to make cuts at the knees, but you can tear the fabric anywhere.

If you cut a little above the knee, then the hole will not become wider and larger with each bend of the knee.
Cuts that are too high expose the linen. Men should watch this especially closely.

If you wash your trousers immediately after decorating, you will loosen the threads even more, so the trousers will look even more frayed.
Incisions that are close to the seams can cause the latter to come apart.
You can pull out single fibers with extreme precision using a sewing needle.
If instead of cardboard you put a piece of brick in your pant leg, you will significantly speed up the process of washing the fabric.

Warnings before starting work

Try not to cut the trouser leg too much. Each new wash increases the wear and tear size.
Be as careful as possible with sharp objects.
Never perform the procedure with pants on your legs.

Creating abrasions on trouser fabric

To make fashionable scuffs on jeans yourself, you need to have the following tools on hand:

pants directly;
sandpaper and block;
a piece of pumice;
grater;
small hard board.

Step-by-step fashionable decor is carried out according to the following scheme:

Mark the selected area for decoration and mark it with chalk or soap.
Take a piece of wood and put it inside your trouser leg under the place where the wear will be in the future.
We proceed to the main stage - the intended place is rubbed using the selected device. Do not rub with force, because in the place of supposed fashionable wear and tear you may end up with an unnecessary hole.
A pumice stone and a grater will help in obtaining a worn finish with fluffy fringe along the edges. This softens the image and at the same time gives it some audacity. Using an emery block or paper you will create designer wear.
At the decorating stage, decorate the scuff with rhinestones, rivets or paper clips.

Hole jeans with "Noodle" effect

As for holes, their creation is more labor-intensive. The following tools will help you create ripped jeans with your own hands:

a piece of plywood;
stationery knife or blade;
eyebrow tweezers or any other;
scissors;
interlining.

You can make a masterpiece out of jeans for yourself using the following scheme:

Any denim pants are woven using colored longitudinal and white transverse fibers. Before the procedure, fix a piece of plywood inside the leg.
Using a blade or pocketknife, make two cuts along the cross grain at a distance of 3-4 cm.
Take scissors or tweezers, use them to carefully pick up and pull out the white threads along the edges. Use caution and patience.
After this, using the same tweezers between the cuts, pull out all the blue threads that are located perpendicular to the bottom ones. Initially, pull one thread at a time, at the end of the manipulation you can pull it out in a bunch.
Fix the edges of the resulting hole from the inside with non-woven fabric to avoid losing the shape of the product.
It is interesting to make a model with numerous long cuts that are free of blue threads.

You can decorate the pants by fixing lace or bright pieces of fabric on the reverse side; this will add audacity and attract attention to their owner.

Decor of torn jeans using the “Grunge” method

Ripped jeans at home in this style will decorate both men's and women's trousers.

To decorate the trousers yourself, we will need:

small board or plywood;
scissors;
stationery knife;
a piece of pumice.

A step-by-step diagram of how to make jeans ripped consists of the following steps:

Secure plywood or board under the desired area inside the trouser leg.
Make 6-9 slits along the cross grain, about half the length of the pant leg.
It’s better to use a stationery knife, because only with its help you will achieve the effect of maximum negligence. You can make slits of different lengths.
After this, rub the holes with your hands and pull out a few blue fibers from them.
Process the bottom of the trousers. Trim the edge, and rub the resulting edge with a piece of pumice to a careless, disheveled look.
In the same way, process the cuts on the pockets and belt to completely enhance the item, create integrity and completeness of the image.

Creating the Frayed Jeans Look

Photos of ripped jeans of this type are similar to “Grunge”, but in this version, the transverse cuts are made chaotically, and along with the blue threads, several white ones are also pulled out for a greater frayed effect. This look is suitable for young girls, but for respectable ladies it is better not to choose it.

"Cut knees" on black jeggings

In 2017, many jeans fans had a new item in their wardrobe, among noodles and other shabby pants - black jeggings with slits at the knees. Buying a trendy item in a store is expensive, but creating something like this fashion trousers you can do it yourself as easy as shelling pears at maximum cost.

The action plan is as follows:

Put on your trousers and mark the location of the future cut with a piece of soap.
Take off the item and put cardboard or a board in the trouser leg.
Use a utility knife to cut the fabric using sharp movements along the marked line.
Straighten the cut and use your fingers to pull out the excess threads.

Secrets to creating the right holes in your knees

Torn knees have not gone out of fashion for decades now. There is a certain specificity in creating an image, because it’s no secret that in such popular places the fabric unravels instantly. We advise you to use a trick and follow a certain algorithm.

Put on your pants. Place a small dot in the middle of the knee with chalk or soap.
Mark the future hole in the shape of an eye, the center of which will be that same point. Carefully cut along the outline.
Process the edges using a special technique. Treat them with a nail file or sandpaper. Wet the edges and roll them up and down a little, securing with pins. Let them dry.
Use a grater to create abrasions on the remaining part of the knee.
This shape will allow the cut to maintain its shape longer.

As you have already seen, creating a beautiful designer item is easy and simple with your own hands. Handmade, made according to an individual project, will make your look fashionable and unique.

The fashion for ripped jeans is not something strange: it is an echo of the country style, in which abrasions, protruding threads and large holes are common. Plain jeans easy to transform into stylish ones at home. Instead of buying designer masterpieces at exorbitant prices, it is enough to use scissors and tweezers correctly.

Preparation

To make ripped jeans, you need to stock up on these tools:

fabric scissors, knife or blade;
sandpaper, grater, pumice - to create abrasions;
tweezers for pulling threads;
chalk or a piece of soap for marking.

Experimenting with scuffs and holes is not suitable for all models. Tight and stretchy trousers are unlikely to be torn beautifully. Holes and threads will make straight and wide-leg jeans more stylish.

Where to start

To properly rip your jeans, you should first mark them. It is better to draw areas of future decor with chalk. It wipes off easily after work and will be noticeable during it. Before marking, put on your pants: this will make it easier to choose the final processing location. Another marking option is to place thick cardboard or something hard and flat under the trouser leg.

The hole can be any size, and the most common places are the hips and knees. In the latter case, the marking for the incision is placed just above the joint.

Advice! If the jeans are old, it is better to make small cuts and avoid places where there are bends. New jeans can be torn in all directions - their material is still quite strong.

How to rip jeans

How to make ripped jeans correctly:

It is recommended to make cuts slightly smaller than the markings so as not to accidentally damage the product.
It is convenient to cut jeans according to the markings, folding them in half at the intended center of the cut.
To create holes and protruding threads, two parallel cuts are made with an interval of 5 mm. Using tweezers, the transverse threads are pulled out. Only the longitudinal ones remain. If you make several cuts, the hole will be larger. The length of the cuts does not have to be the same - different ones will make the decor more interesting.

The threads look very impressive, but there is no need to leave them all. Some holes in jeans look good without threads. You just need to trim the edge.
To create abrasion, the fabric is treated with sandpaper, a grater or pumice. You can even try a nail file. The fringe is made along the edges of the cuts, while trying not to damage the transverse or lobar threads.
You can also get a fluffy edge using tweezers: you need to pull several threads with it.
To make the legs appear long, the incisions are placed vertically, randomly and sparingly.