collection from http://www.etsy.com/shop/EyePopArt
MK - Bowl made of plate, created by melting
What is needed:
Oven
Vinyl record
Baking tray
Metal cup or pan
Another cup (optional)
Glass cup
Weighting agent (for example, a tin can)
Edges down method
1. Find some cheap, unwanted vinyl records. Don't take anything that doesn't belong to you; Better look for them at your local thrift store.
2. Heat the oven to 100-150 degrees Celsius.
3. Place the disc in the center of an upside down pan or metal bowl. Place on a baking sheet.
4. Place in the oven. Monitor the process closely, as each disk begins to “fall through” different times. This usually takes 4-8 minutes.
5. Remove everything from the oven (wearing oven mitts, of course) when you notice that the vinyl is really “sagging.”
6. Place the vinyl disc in another cup and shape it into this container. Or you can do it by hand. Or maybe you like the shape that the vinyl took in the oven, if so, then leave everything as it is.
7. Let the product cool for 10-15 minutes.
8. Turn over.
9. The product is ready for use!
Edges up method
1. Find a heat-resistant glass bowl slightly smaller than the disc.
2. Preheat the oven as described above.
3. Place the record on top of the center of the cup.
4. Place the container with the disk in the oven and place a tin can on top of it.
5. Pay close attention to how the vinyl drips. If the sides of the circle overlap the container, then you need a heavier tin or a larger cup. If you don't want to start over or just want a deeper vinyl product, you can try gently pressing down on the disc.
6. Remove everything from the oven when the bowl is the desired size.
7. Cool, flip and you're done!
Adviсe
To add weight, you can fill the jar with something, such as beans.
Dry foods such as popcorn or nuts can be served in such a bowl by first lining the bottom with baking paper or parchment.
In summer, when it gets very hot, you can place a metal container in the sun to warm it up. Then place the plate on it and leave it in the sun for 10-15 minutes, depending on the temperature outside. Shape the product and cool. No fumes or heated kitchen in the apartment!
You can decorate your piece by adding glitter or glitter glue.
Cautions
Work in a well-ventilated room. Open the windows and turn on the fans.
Do not use these containers for food, especially hot food - even buttered popcorn. Vinyl is not a food grade material and may leach harmful chemicals.
Your vinyl bowl will be hot when you remove it from the oven. Be careful!
Do not leave the tin on the container for too long as it may explode due to the heat; if you wish, you can puncture it with something beforehand to relieve the pressure.
Always use protective gloves when working on a hot surface.
Keep an eye on the bowl while it is in the oven. Vinyl has a very low melting point and can ruin your stove if you forget to use it.
Modern vinyl is made from vinyl-derived polymers and chloride monomers, which is similar to polyvinyl chloride (PVC). Only additives during the production process distinguish them. Vinyl chloride is a carcinogen and vapors can be released when heated along with phthalate plasticizers. When heated, gas and sediment are released. It is advisable not to heat the plates in the same stove in which you cook food many times, as gas can accumulate on the walls of the oven. Infrequent use of these technologies is harmless, but regular use can lead to liver cancer (quote).
In addition, new discs melt when heated, rather than bending. Therefore, it is better to use the old ones.
Vinyl records are something that was once an indispensable attribute of music lovers, but over time, thanks to technological progress, it was replaced by much more compact and capacious sound carriers. cosmetic non-surgical procedure at the clinic of Doctor Liliana And if you have a lot of such old things left at home, then do not rush to throw them away. By using your imagination and setting aside a little time, you can make the most amazing decorative items, kitchen utensils and even accessories from them. Here are a number of examples of how you can use old records.
1.Creative wreath
To create such a wreath, which will become a wonderful wall decoration, you will need thin paper, thin rope, a breadboard knife and, of course, a vinyl record. Detailed instructions you can see in the photo. You can use this wreath as a festive one: hang it on front door to greet guests.
2.Unusual jewelry
Lovers of original accessories will certainly appreciate stylish earrings, rings and bracelets, converted to new way using vinyl. To make them, you need to heat the plate a little in the oven so that it becomes flexible, and then cut out the necessary elements from it and give them the shape that you like. You can update your jewelry with vinyl or create your own from scratch.
3. Jewelry storage stand
Another idea is an unusual vinyl stand, which is very convenient for storing jewelry. Take an unnecessary plate or bowl, place a plate on it and float. Once cool, shape the vinyl as desired.
4.Painted paintings on the wall
Drawing lovers can create real masterpieces simply by painting old records with oil or acrylic paints. Such paintings will decorate even the most boring room and will remind guests that you are a creative person.
5.Cover for a book or notepad
A wonderful gift for any creative person, especially a musician, is a book or notebook with an unusual record cover. To make it, you need to melt the vinyl a little so that it fits on the cover of the book. If desired, you can make drawings or inscriptions on top in bright colors.
6.Photo frame
A photo frame made from an old record is an excellent alternative to already boring ceramic frames. And it’s not difficult to make: just glue the desired photo in the center of the plate. You can add decor and, for ease of use, a stand.
7.Flower pot
This cute flower pot is very easy to make and will decorate any windowsill: you just need to heat the vinyl and the glass container underneath, and then shape it into the desired shape, just like when making a jewelry stand.
8. Fruit stand
In the summer, such a thing as a stand for fruit (candies, cookies, etc.) will be relevant. It is done by analogy with the previous version, only it should be flatter, since this is still a stand, not a vase.
The long-awaited summer has arrived, and large number people went on vacation to the village or to their country houses. On warm summer evenings, while sorting out things stored in attics and basements, many people come across old vinyl records that they loved to listen to as children. Now they are not needed, but with a little effort and imagination the records can be given “new life”.
To create fashion watches You will need one vinyl record, an inexpensive watch in a plastic case and a sharp knife. Vinyl, which is the main material for, has one special property - it has a low melting point. Accordingly, a hot, sharp knife will glide over the surface of the plate like butter, cutting out the desired shape for the watch, which depends only on your imagination. The only condition is to leave the space for the future dial untouched. Then the hands are removed from the clock, and their body is glued to the back of the vinyl record. The hands are put back on the pulley, the mechanism is wound up and set to the current time.
To create designer vase for fruits or sweets It’s enough just to give a “new breath” to the vinyl record. It is widely known about the property of vinyl to change its ductility under the influence of high temperatures. The making of this craft is based on this property. The vinyl record is placed on a stand in a preheated oven for several minutes. The main thing is to get it out of there in time so that you don’t have to clean the surfaces from melted vinyl. Once softened, the plate can take any vase shape you want. After the plate has become sufficiently strong, having frozen after deformation, you can paint it in any colors that suit your interior.
Whoever dreams of enjoying reading a good book on a warm summer evening. The face of a book is its cover, and vinyl record cover– this is also the author’s original solution. This framing can be used not only for books, but also for thick general notebooks and diaries.
Using a sharp hot knife, two plates are cut out of a vinyl record, equal in size to the cover of a notebook or book. The vinyl is then glued to the front and back using a quality adhesive that can provide long term operation of the craft. A pre-prepared strip of thick fabric or paper is placed in place of the binding, acting as a connecting element. Agree that it’s even nice to hold such a book in your hands.
from vinyl records will become fashionable and original decoration any girl who wants to attract attention this summer. Any lady can independently provide herself with vinyl jewelry.
To do this, a drawing is applied to the plate in advance with a pencil - a pattern of the product. To make one of possible options earrings, a triangle is selected as the pattern shape. A vinyl product is placed in the oven with one task - to soften the material without exposing it to high temperature. The twisted shape is created using needle nose pliers. On ready-made craft made of vinyl acrylic paint Various patterns are applied, which make the earrings unique and attract the attention of others.
The widespread use of vinyl as a material for crafts is based on its ability to take any shape under the influence of high temperature. This provides enormous opportunities for developing your creativity. The main thing is to follow all safety requirements when working with a hot knife and vinyl.
Vinyl records are one of those things that you just can't throw away because there's too much going on with them. Memories, nostalgia, sounds of the past... Well, how can you throw all this into the trash? After all, this is the same as tearing part of your life out of your heart. Kvartblog absolutely agrees with you that throwing away memories is an unaffordable luxury. We offer to give a second life to your records, and you will do it yourself! So, choose which idea you like best, and get to work!
Watch
And not just a watch, but a surreal variation in the spirit of Dali. To turn an old record into a new clock, you will need an oven, glue and a clock mechanism.
Step one
Place the record in a warm (not hot, this is important!) oven and let it melt a little.
Step two
Once your plate is soft and pliable, carefully remove it from the oven and place it on the edge of the table. Now you can make the shape you want - it's time to improvise!
Step three
Gently coat the central part of the plate with glue and secure the clock mechanism and hands on both sides. Your watch is ready!
Once upon a time, vinyl records were an object of desire, they were obtained through great connections, they made the owner of Beatles records or the record “On the Waves of My Memory” by Mikael Tariverdiev happy. Entire generations have grown up with musical children's fairy tales.
Therefore, the regrets of the owners of vinyl collections are so understandable. The records can no longer be used for their intended purpose, and it’s an incredible shame to simply throw them away.
However, you have to part with useless things, and therefore it is worth checking the condition of the vinyl discs. Separate those that do not have scratches or damage and those that are no longer suitable for listening.
Selling old vinyl records
Undamaged vinyl records must be rewritten according to, indicating the artist, year of release and manufacturer.
Go through specialized forums or the Internet and place ads on them with a list of records available for sale or donation.
In this case, everyone will be happy. With or without money, dear records will find their new owner and will not end up in a landfill.
What can you make from old vinyl?
The vinyl from which the discs are made is plastic and softens at low temperatures. Once you place a vinyl disc in the oven for just a few minutes, it will turn into a magnificent material for creating real masterpieces.
Using your hands or using available tools, you can give the edges of the soft plate the desired shape. You will get a decorative plate, a stylish flower pot, a clock in the style of Salvador Dali or a fruit vase.
If you cut out shaped holes in a soft plate, then a unique designer piece will become a decoration for your home. This could be a wall panel in the shape of a cat or a butterfly, a clock that can be given any shape, a decorative plate for the wall, or a painting for interior decoration.
Vinyl is beautifully acrylicized and decorated. On an already curved or cut out plate or panel (certainly cooled down), you can use the decoupage technique and get the product in perfect condition. vintage style. Or, on the contrary, the most modern thing, decorated with abstraction or Khokhloma.
Before throwing away your old record collection, it’s worth thinking about the fact that someone is looking for old records on vinyl or someone’s handy hands could use this fertile material for creativity.
