Every mother tries to dress her child in an original way. To create bright image There is no need to buy expensive clothes for your baby. Unusual bunnies will help with this. These baby's first shoes can be not only comfortable, but also beautiful. To do this, you don’t have to know how to knit professionally or look for a specialist in this type of needlework. Just read how to knit bunny booties. The description diagrams shown in this article will help anyone cope with this task.
These bunny booties will look great on little feet. If you choose the right yarn color, both boys and girls can wear them. For a charming baby, you can knit booties with bunnies from pink yarn or white, but for my son they will be more suitable dark colors- blue, blue. 
All that remains is to consider how to knit bunny booties with knitting needles.
Bunny booties reviewed in this description, knitted from “Semyonovskaya yarn”, you can also take “Pekhorka”, in which wool and acrylic are 50/50. You will need 5 knitting needles 2.5 mm.
The sole is knitted with knit stitches.
Cast on 7 loops (the first and last are edge loops). Let's knit one row.
2nd, 4th, 6th rows - near edge loops make yarn overs, knit yarn overs in odd rows as knit stitches crossed.
You will get 13 loops.
We knit 26 rows without increases.
Yarn over on each side and knit 15 stitches without increasing. You should get 23 stripes out of 46 rows.
At the beginning and end of odd rows, knit 2 stitches together until 7 stitches remain. Cast them off.
We cast on loops on 4 knitting needles with white thread. There should be 12 loops on the toe, and an even number on the rest.
We form teeth.
We knit a row of knit stitches in the round
2p.: 2 knit stitches together, yo. Repeat until the end.
3-4 rows: fasten the knit loops and cut the white thread.
To form the cloves, we knit with red thread, connecting the loops of the next row with the red loops of the row that was before the white one. 
Or knit in a circle with red thread and sew up the loops 
9 rows are knitted with knit stitches. 
We knit a toe on 12 loops located in the front.
Transfer the 12th loop to another knitting needle and knit 2 loops together.
Rotate the product. Remove the 1st loop, with the thread at the front.
The remaining loops are purl, except for the last one, which is not knitted. The last loop is transferred to another knitting needle and knitted together with the next purl.
Rotate the product.
The first loop is removed, the remaining ones are knitted.
Continue knitting in this way until you have 30 loops and 12 toe loops on the knitting needles.
We finish knitting on the purl row. 
We continue to knit from the inside in circular knitting.
2 rows purl, 7 rows – rib 1*1, 7 rows – knit, 1 row – purl, 7 rows – knit. We tie a white thread.
1r. – persons, 1 rub. - purl, 1p. persons., 1 rub. - purl
We take the red thread and continue two rows of knit loops.
We close all the loops. 
All that's left is to tie our bunnies' ears.
We cast on the knitting needles 22 loops.
1r. - purl
We knit 6 rows with red thread - 1 row - purl, 1 row - knit, 1 row - purl. etc.
Leave a little red thread to sew on the eyelet.
Knit two rows with white thread and bind off the loops. Use a hook to connect the two edges. 
You can also check out another model
half-wool yarn
knitting needles number 2.5 and hook
The first thing to knit is the insole. Cast on seven stitches and knit the first row.
In the next - fourth and sixth row, near the edge, make a yarn cast. Where there will be rows with an odd number, make crossed knit stitches. This method is done so that there are no gaps in the canvas. You should have thirteen loops, knit them inside out. The number of stripes should be approximately twenty-six. Then make two additions. As a result, you will have a total of fifteen pieces. Knit another twenty-three rows.
Continue with the tutorial and knitting on the soles for the bunny booties. Take white yarn and make loops on 4 tools. On two of them there will be twelve pieces each, and on the rest, dial an even number that will correspond to the parameters of the sole.
Bunny booties will look even more interesting if you use several colors of thread. Using white yarn, knit the first round row using the knit stitch method. The next one is done according to this pattern: two knit stitches and a yarn over. Continue these actions until the very end. The third and fourth are again knitted with only knit stitches. The white thread is completed, tie the end and trim off the excess. Now take red yarn, from which you need to make cloves. You need to attach the loops of the next strip to the row that was before the white thread. The photo shows how to do this. Knit nine circular stripes.
The master class continues, now you need to do work on the toe. It is done in almost the same way as knitting a heel in a sock. In this case, the twelve front buttonholes will be used, as well as the remaining ones on the other needles. The thread should be before work, remove the first element, and knit the rest inside out, except for the last one. It is thrown onto another and knitted together inside out. Turn the workpiece and remove the first loop, and make the rest using the front stitch method. Continue this until there are thirty pieces left on the knitting needles, plus twelve for the toe.
The new stage of work is to knit bunny booties in a circle from the inside. Make two lines on the wrong side. Then 7 rows with an elastic band. Another 7 - knit and 1 purl. The last 7 lines are face. Insert the white thread again. Use it to knit four lines, which will alternate with the wrong side and the face.
Then use red yarn to knit 1. row and 1 purl. Again in white according to this pattern: knit 1, purl 1, knit 1, purl 1. at the end the loops close.
The main attribute of bunny booties is the ears. They will require white and red yarn. From the white one, cast on twenty-two buttonholes and knit the first row inside out. Use another color to make 3 purls. stripes and 3 persons, which will alternate among themselves.
Using a light thread, make two more lines and close the loops with a crochet hook. Using the remaining thread, sew the bunny ears to the booties. Embroider the nose with your own hands in any shape, that is, in any way that is convenient for you.
Not all kids like to dress up, but if clothes remind funny toy, the process will become more enjoyable. We offer you a master class that will help you knit bunnies with knitting needles. This shoe option is suitable for newborns.
You will need yarn of two contrasting colors. For girls, pink and white, and for boys, blue and light gray. Choose the composition of the yarn based on the time of year. For summer and spring, cotton, viscose or silk are suitable. For cold weather - wool, acrylic or mohair. IN in this case mixed thread (50% wool, 50% acrylic). You will need a set of double needles that match the size of the yarn.
Getting started
The length of the foot is 13 cm. Be guided by the length of the child’s leg. Try on the booties while knitting, or work according to exact measurements.
Conventions in the lesson
- facial loop - LP;
- purl loop - IP.
In the master class follow detailed description. Start working from the sole with yarn of the main color. Cast on five stitches on the knitting needles. In the first row, perform LP, and in the second, make additions. To do this, make two units from the second and fourth loops. Insert the knitting needle behind the front wall, pull out the loop, and again into this loop behind the back wall. Perform the remaining loops as IP.
There are seven loops on the knitting needle. Then knit using the following technique:
- In the third row of LP.
- Knit the fourth as the second, and you will get 9 loops on your knitting needles.
- In the fifth row there is an LP, and the sixth is like the second, and you will get 11 loops on the knitting needles.
- Knit rows 7 to 19 stockinette stitch directly, that is, without additions.
- The 20th row is like the second. Make two increases and you get 13 stitches.
- From 21 to 29 rows - stockinette stitch.
- 30th row - knit the first and second stitches together, then all the stitches in the stitch, the penultimate and last stitch together in the stitches.
- 31st -LP.
- 32 is like the thirtieth.
- Row 33 – LP.
Then in each even row, decrease at the beginning and end of the row, and knit LP in odd rows until 5 stitches remain.
Close the loops, the bunny sole is ready.
Switch to threads of a different shade and tie the cloves. Cast on 16 stitches on the sides of the sole, 6 on the toe, and 8 stitches on the heel:
- The first row is all individual entrepreneurs.
- 2nd row – two stitches together, yarn over, two stitches together again, and so on on each needle. This simple circuit to form cloves.
- 3rd row and 4th row-IP.
WITH front side Attach a thread of the main color to the product and knit 5 rows.
Start shaping the toe part of the bootie. Work on a needle with five stitches. Knit all the loops from the LP needle, transfer the fifth loop to the knitting needle adjacent to the left, and throw the first loop onto the one that was transferred. Return the resulting loop to the knitting needle. Knit the next row IP, and with the last loop do the same as in the previous row. As a result, the loops on the sides are shortened. Continue decreasing until there are 6 and 7 stitches left on the side needles.
Tie two rows of IP. Work along the inside of the canvas. Then knit 5 rows with a 1x1 elastic band, and 10 rows of LP. Switch to a different color of yarn and knit 4 rows. In the first, perform the LP, in the second the IP, the third LP, and the fourth row of the IP.
Using yarn of the main shade, two rows of LP, then 4 rows with another shade, alternating a row of LP, and a row of PI. Close the loops and make a lapel.
To sew the teeth, turn the bootie inside out and sew the top seams to the bottom seams, as shown in the photo.
Dear aspens, I am very pleased that you liked my booties. I receive emails asking for a description, I have never done MK. This is my first.
I knit on 4 needles, the seam follows only the mark. Cast on 46 stitches on the needles.
to photo hosting →
I have one needle that is thinner, but then the edge doesn’t stretch as much. Next I distribute the stitches onto 3 needles and knit in the round. 1p - front, 2p - and all even rows - purl. From the 3rd row I make an increase: 1 knit, 1 loop (from the broach of the previous row, then I will mark it as ") 21 knit," ", 2 knit," ", 21 knit," ", 1 knit. Row 5: k2, ", k21,", k4, ", k21,", k2. Row 7: k3, ", k21,", k6, ", k21,", k3. . Row 9: k4, ", k21, ", k8, ", k21, ", k4. (62 loops) it turned out like this:
to photo hosting →
Now we take another thread and knit “teeth” 3 rows - knit, 1 row - yarn over, 2 loops together. And again 3 rows of front. By wrong side the "white path" is very visible
to photo hosting →
we are recruiting her at extra knitting needle to photo hosting → and knit the green loop and the loop from the additional needle together.
to photo hosting → The “teeth” are ready. Now we knit in a circle, (We have already knitted one row) We knit the next row with purls, then again 1 row with knits, and 1 row with purls. Take another thread and knit 1 row of knits and 1 row of purls.
to photo hosting →
There are 14 rows in total, or 3 tracks of a different color. We knit a “toe” for this on the first knitting needle we have 16 loops, for 2-10, take the main thread, knit 9 knit stitches, 2 together, turn over - 9 knits, 2 together. Change color every two rows. We have 16, 10, 16 left (42 loops) we knit with white thread - 1 row of knits, 1 row of purls. Using green thread we knit holes for the lace: 1 row of knit, 1 row: yarn over, 2 loops together, 1 row of purl. Next we knit with an elastic band 1*1, 17 rows
to photo hosting →
Now we will turn the bootie inside out and continue knitting. We knit 1 row of knits, 1 row of purls with green thread. (Pattern - the number of loops is divided by 4, we have 42, in the first row with green thread, I decrease 2 loops, and on 40 loops I knit the pattern) With white thread, 1 row: k1, * remove 1 loop while working, 3 persons*. Row 2: P1, *Slip 1 stitch, thread at work, P3*. Repeat rows 1 and 2 again. Knit 1 row of knits, 1 row of purls with green thread.
to photo hosting →
Then with white thread: knit 3, remove 1 loop, thread at work.
Next row: purl 3, slip 1 stitch, thread at work.
Repeat these two rows again. We knit with green thread: 1 row of knits, 1 row of purls. White thread: k1, slip 1 loop, thread at work. In the next row we knit: purl 1, slip 1 loop, thread at work, purl 3. We repeat these two rows again. And we knit 1 row of knits, 1 row of purls with green thread. Here's what happened:
to photo hosting →
The pattern fits well. The threads are changed on the wrong side, but on the front side it is not visible. We knit 1 row of knits, 1 row of purls with white thread, and close the loops. We sew up the trace. The bootie is ready.
A real mother always cares about the comfort and health of her baby. The child will definitely be interested in bright shoes, but at the same time they should still be soft and warm. We advise you to read our master class on knitting booties in the shape of fluffy bunnies. We warn you that the shoes are designed for a child aged 3-4 years.
To work you will need to prepare:
- hook;
- cardboard;
- a needle;
- scissors;
- suitable yarn.
Obviously, the choice between brown and pink shades should be made depending on whether you are crocheting “Bunny” booties for your daughter or son. White will be universal for any gender.
Detailed job description
First of all, you need to tie the sole. This can be done using a very clear diagram:
A thread of pink or brown cast on a chain of 25 loops (chain). Knit as shown in the picture above.
Let's start with the instep and toe. To do this, take a white thread (universal for boy’s and girl’s booties) and knit five rows with single crochets in a circular pattern. Let's start creating the toe according to the following scheme:
To do this, we continue to knit, gradually removing the stitches from the toe side. That's it, we managed to knit the booties themselves. Cut the thread with scissors.
Since our booties will be shaped like bunnies, we need to add a tail and ears.
Take a brown or red thread and cast on a chain of 11 loops (again air stitches). You need to knit them according to this simple pattern:
- Air loop (lift).
- Single crochet (dc) - nine pieces in each loop.
- The tenth loop is 5 double crochets.
On the second side you also need to knit 9 tbsp. Take a white thread. Next, you need to tie the resulting product with double crochets: 9 in each loop, 2 in the top 5 loops and again 9 in each.
We repeat all operations 3 more times to knit all the ears that will need to be sewn to the toe.
