Annichen Sibbern combined the old Norwegian method circular knitting with a simple graphic design and it looked very modern. It was proposed to knit the body in two parts and join them together while knitting the round yoke.
Such patterns fit comfortably vertically into the design, forming a round yoke.
Jumper or sweater with round yoke Knit completely in the round, both body and sleeves.
Although a sweater or jumper with a round yoke looks complicated, it is not difficult to knit.
For calculations, the percentage method of E. Zimmerman is very good, that is, all sizes are calculated as a percentage of the main measurement - breast volume, which is taken as 100%.
The body and sleeves are knitted separately up to the armholes.
Then they are connected on long circular knitting needles and a yoke is knitted. The simplest way to set its shape is to place three rows of decreases between the stripes of patterns.
For a person of average build, the height of the yoke from the armpit to the neck is 25% of the chest circumference. It is necessary to divide the depth of the yoke into 3 sections. The yoke is knitted up to the middle without decreasing.
The first decrease is made in the middle of the yoke.
A row of decreases is worked like this: knit 2, 2 together in the round until the end of the row.
The second decrease is at the height of the yoke 2/3-3/4. In this row you need to decrease 33% of the stitches in the rhythm of knit 1, knit 2 together.
And the last, third decrease - 2-3 cm from the neck, in the rhythm of 1 front, 2 together, 2 together.
Decrease in this way is convenient to do if the pattern is arranged in the form of colored stripes, then the rows of decreases need to be adjusted between them.
If the pattern consists of tapering segments, the following method can be used.
In any case, the number of neck loops should be 40% of the chest circumference.
Traditional sweaters are not usually knitted sprout It is not difficult to knit it, especially since it significantly improves the fit.
After combining the body and sleeves onto circular knitting needles, you need to make to form a sprout: several additional shortened rows And only after that proceed to the patterned yoke. If the pattern allows, you can make several short rows between the patterned stripes in the middle of the yoke.
Nordica by Amy Gunderson Jacquard Pullover 
Women's pullover in Gzhel style
Master class from Svetik NN.
Size 46-48. Yarn: white 4 skeins Alize alpaca royal (100g/250m) and 1 skein for decoration Children's whim in two threads and Alize baby vul in two threads.
Toe and circular knitting needles on fishing line No. 3 and 4.
I knitted a sweater from the bottom using circular and sock knitting needles.
Sleeves: Cast on 44 stitches using Italian cast-on needles No. 3.5.
The Italian set is clearly shown in these diagrams from the Internet
We knit the cuff to a height of 6-7 cm.
Then we switch to needles No. 4, add 12 stitches evenly and knit 4 rows in a circle stockinette stitch white threads. Then we begin to knit the pattern according to Fig. 1
At the highest point of the sleeve we have 72 loops on our knitting needles. Slip 11 stitches onto a pin under your armpit.
We also knit the second sleeve. Set aside both sleeves.
We knit the body part on circular knitting needles. Cast on 172 stitches on needles No. 3 (Italian cast-on). We knit a 2x2 elastic band to a height of 6-7 cm. Then we switch to needles No. 4 and evenly add 4 loops to match the pattern. We knit 4 rows in stockinette stitch and then follow the pattern in Fig. 1.
Then we need to connect all three parts in a circle.
Having connected in a circle, we begin to knit a circular ornament on the yoke. 
This is how it turns out
After the ornament comes the openwork according to the pattern.
I used schemes 2 and 3.
I sewed the removed loops under the armpit using a kettel stitch.
This is what happened
Jumper and pattern chart
Pattern diagram:
Snowflake pattern diagram:
Jumper with a round yoke and snowflake pattern:
Annichen Sibbern combined the old Norwegian method of circular knitting with simple graphic design and it looked very modern. It was proposed to knit the body in two parts and join them together while knitting the round yoke.
Such patterns fit comfortably vertically into the design, forming a round yoke.
A jumper or sweater with a round yoke is knitted completely in the round, both the body and the sleeves.
Although a sweater or jumper with a round yoke looks complicated, it is not difficult to knit.
For calculations, the percentage method of E. Zimmerman is very good, that is, all sizes are calculated as a percentage of the main measurement - breast volume, which is taken as 100%.
The body and sleeves are knitted separately up to the armholes.
Then they are connected on long circular knitting needles and a yoke is knitted. The easiest way to define its shape is to place three rows of decreases between the stripes of patterns.
For a person of average build, the height of the yoke from the armpit to the neck is 25% of the chest circumference. It is necessary to divide the depth of the yoke into 3 sections. The yoke is knitted up to the middle without decreasing.
The first decrease is made in the middle of the yoke.
A row of decreases is worked like this: knit 2, 2 together in the round until the end of the row.
The second decrease is at the height of the yoke 2/3-3/4. In this row you need to decrease 33% of the stitches in the rhythm of knit 1, knit 2 together.
And the last, third decrease - 2-3 cm from the neck, in the rhythm of 1 front, 2 together, 2 together.
Decrease in this way is convenient to do if the pattern is arranged in the form of colored stripes, then the rows of decreases need to be adjusted between them.
If the pattern consists of tapering segments, the following method can be used.
In any case, the number of neck loops should be 40% of the chest circumference.
Traditional sweaters are not usually knitted sprout It is not difficult to knit it, especially since it significantly improves the fit.
After combining the body and sleeves onto circular knitting needles, you need to make to form a sprout: several additional shortened rows And only after that proceed to the patterned yoke. If the pattern allows, you can make several short rows between the patterned stripes in the middle of the yoke.
Nordica by Amy Gunderson Jacquard Pullover
Women's pullover in Gzhel style
Master class from Svetik NN.
Size 46-48. Yarn: white 4 skeins of Alize alpaca royal (100g/250m) and for ornament, 1 skein of Children's whim in two threads and Alize baby wool in two threads.
Toe and circular knitting needles on fishing line No. 3 and 4.
I knitted a sweater from the bottom using circular and sock knitting needles.
Sleeves: Cast on 44 stitches using Italian cast-on needles No. 3.5.
The Italian set is clearly shown in these diagrams from the Internet
We knit the cuff to a height of 6-7 cm.
Then we switch to needles No. 4, add 12 stitches evenly and knit 4 rows in a circle using stockinette stitch with white threads. Then we begin to knit the pattern according to Fig. 1
At the highest point of the sleeve we have 72 loops on our knitting needles. Slip 11 stitches onto a pin under your armpit.
We also knit the second sleeve. Set aside both sleeves.
We knit the body part on circular knitting needles. Cast on 172 stitches on needles No. 3 (Italian cast-on). We knit a 2x2 elastic band to a height of 6-7 cm. Then we switch to needles No. 4 and evenly add 4 loops to match the pattern. We knit 4 rows in stockinette stitch and then follow the pattern in Fig. 1.
Then we need to connect all three parts in a circle.
Having connected in a circle, we begin to knit a circular ornament on the yoke.
This is how it turns out
After the ornament comes the openwork according to the pattern.
I used schemes 2 and 3.
I sewed the removed loops under the armpit using a kettel stitch.
This is what happened
Jumper and pattern chart
Pattern diagram:
Snowflake pattern diagram:
Jumper with a round yoke and snowflake pattern:
Dimensions: S/M (M/L) L/XL, product width across chest circumference: 94 (101) 109 cm, product length: approximately 64 (65) 66 cm.
You will need: yarn (100% wool; 50 g/100 m) - 7 (8) 9 skeins white, 1 (1) 2 skeins light gray, 1 (1) 2 skeins blue-gray, 2 (2) 3 skeins black, 1 (1) 1 skein of orange; circular knitting needles No. 3 and 3.5, length 40 and 80 cm; stocking needles No. 3 and 3.5.
Knitting density: 22 p. x 30 r. = 10 x 10 cm, knitted in stockinette stitch with knitting needles No. 3.5.
Important: The density of your knitting must match the given one! If only one number is indicated in the description of a model, then it applies to all sizes.
Attention: when performing decreases after ribbing, knit the front loops over the purl ones; Knit 2 stitches together if this is the first of 2 knit stitches, and knit crossed if this is the last of 2 knit stitches. Then the decreases will be almost invisible.
Job description: back and front are knitted in one piece. On circular needles No. 3, using black thread, cast on 248 (268) 288 sts and knit in the round with an elastic band (= alternately knit 2, purl 2). Important: mark the beginning and middle of the circular row = side seam lines. When the height of the elastic is approximately 4 cm, switch to circular knitting needles No. 3.5 and continue knitting in the circle with the stockinette stitch pattern according to pattern 1, while in the 1st r. decrease stitches evenly, knitting approximately every 5th and 6th stitch together. Knit stitch = 208 (224) 240 stitches. Having completed pattern 1, continue working with white thread. After knitting 2 rows, perform a row with decreases: from the beginning of the row, knit 1 stitch after the mark, knit 2 stitches together, then knit up to 3 stitches before the next mark, slip 1 stitch, knit the next stitch and pull through the removed loop through the knitted one, knit 2, knit 2 stitches together, knit up to 3 stitches before the mark at the beginning of the row, remove 1 stitch, knit the next loop and pull the removed loop through the knitted one, knit 1. Continue to decrease 1 stitch on both sides of the marks in every 16th row, for a total of 3 rows. with reductions. Having knitted 14 rubles. after the last row with decreases, add 1 stitch on both sides of the 2 middle loops at each mark, repeat increases every 20th row, complete 3 rows in total. with allowances. When the length of the product is 37 cm, continue knitting according to pattern 2. Having completed pattern 2, bind off the loops for the armholes: from the beginning of the row, close off 7 sts, knit 90 (98) 106 sts, bind off 14 sts, knit 90 (98) 106 p. and close the last 7 p. Then put the work aside temporarily.
Sleeves: on stocking needles No. 3, with a black thread, cast on 68 (72) 76 sts and knit in a circle with an elastic band (= alternately knit 2, purl 2) Important: mark the beginning of the circular row = sleeve seam line. When the height of the elastic is approximately 4 cm, switch to stocking needles No. 3.5 and continue knitting in the circle with stockinette stitch pattern according to pattern 1 (as you add loops, switch to circular knitting needles No. 3.5), while in the 1st r. decrease stitches evenly, knitting approximately every 5th and 6th stitch together. Knit stitch = 57 (61) 65 stitches. Having completed pattern 1, continue working with white thread. On both sides of the 2 middle loops at the mark, add 1 stitch at the beginning and end of each 14 (12) 10th row. so that there are 71 (77) 83 sts on the knitting needles. When the sleeve length is approximately 39 (40) 41 cm, continue knitting according to pattern 2. Having completed pattern 2, in the next row close off the first and last 7 sts = 57 will remain on the knitting needles (63) 69 p. Set the sleeve aside temporarily. Knit the second sleeve in the same way.
Round yoke: connect the knitted parts (back, sleeve, front, sleeve) by transferring the loops of the parts to circular knitting needles No. 3.5, = total 294 (322) 350 sts. Knit in the round with a pattern according to pattern 3, making decreases as shown. Important: as the stitches decrease, for ease of knitting, switch to shorter circular knitting needles. Having finished pattern 3 (on knitting needles 126 (138) 150 stitches), start knitting the neckband. To do this, switch to circular knitting needles No. 3 and continue working in the circle with black thread: knit 1 p. knit, decreasing 2 sts, = 124 (136) 148 sts, then knit with an elastic band (= alternately knit 2, purl 2) until the width of the bar is approximately 4 cm, then bind off the loops.
Jacquard pullovers with round yoke knitting needles (patterns + MK)Annichen Sibbern combined the old Norwegian method of circular knitting with simple graphic design and it looked very modern. It was proposed to knit the body in two parts and join them together while knitting the round yoke.
Such patterns fit comfortably vertically into the design, forming a round yoke.
A jumper or sweater with a round yoke is knitted completely in the round, both the body and the sleeves.
Although a sweater or jumper with a round yoke looks complicated, it is not difficult to knit.
For calculations, the percentage method of E. Zimmerman is very good, that is, all sizes are calculated as a percentage of the main measurement - breast volume, which is taken as 100%.
The body and sleeves are knitted separately up to the armholes.
Then they are connected on long circular knitting needles and a yoke is knitted. The easiest way to define its shape is to place three rows of decreases between the stripes of patterns.
For a person of average build, the height of the yoke from the armpit to the neck is 25% of the chest circumference. It is necessary to divide the depth of the yoke into 3 sections. The yoke is knitted up to the middle without decreasing.
The first decrease is made in the middle of the yoke.
A row of decreases is worked like this: knit 2, 2 together in the round until the end of the row.
The second decrease is at the height of the yoke 2/3-3/4. In this row you need to decrease 33% of the stitches in the rhythm of knit 1, knit 2 together.
And the last, third decrease - 2-3 cm from the neck, in the rhythm of 1 front, 2 together, 2 together.
Decrease in this way is convenient to do if the pattern is arranged in the form of colored stripes, then the rows of decreases need to be adjusted between them.
If the pattern consists of tapering segments, the following method can be used.
In any case, the number of neck loops should be 40% of the chest circumference.
Traditional sweaters usually do not have a sprout knit in them. It is not difficult to knit it, especially since it significantly improves the fit.
After combining the body and sleeves on circular knitting needles, you need to make a few additional shortened rows to form the sprout. And only after that proceed to the patterned yoke. If the pattern allows, you can make several short rows between the patterned stripes in the middle of the yoke.
Nordica by Amy Gunderson Jacquard Pullover
Women's pullover in Gzhel style
Master class from Svetik NN.
Size 46-48. Yarn: white 4 skeins of Alize alpaca royal (100g/250m) and for ornament, 1 skein of Children's whim in two threads and Alize baby wool in two threads.
Toe and circular knitting needles on fishing line No. 3 and 4.
I knitted a sweater from the bottom using circular and sock knitting needles.
Sleeves: Cast on 44 stitches using Italian cast-on needles No. 3.5.
The Italian set is clearly shown in these diagrams from the Internet
We knit the cuff to a height of 6-7 cm.
Then we switch to needles No. 4, add 12 stitches evenly and knit 4 rows in a circle using stockinette stitch with white threads. Then we begin to knit the pattern according to Fig. 1
The pattern is obtained on 12 rows. Next, we knit the sleeve with white yarn to a height of 44 cm, making 8 increases on both sides along the bottom of the sleeve.
At the highest point of the sleeve we have 72 loops on our knitting needles. Slip 11 stitches onto a pin under your armpit.
We also knit the second sleeve. Set aside both sleeves.
We knit the body part on circular knitting needles. Cast on 172 stitches on needles No. 3 (Italian cast-on). We knit a 2x2 elastic band to a height of 6-7 cm. Then we switch to needles No. 4 and evenly add 4 loops to match the pattern. We knit 4 rows in stockinette stitch and then follow the pattern in Fig. 1.
Then we need to connect all three parts in a circle.
Having connected in a circle, we begin to knit a circular ornament on the yoke.
This is how it turns out
After the ornament comes the openwork according to the pattern.
I used schemes 2 and 3.
I sewed the removed loops under the armpit using a kettel stitch.
This is what happened
Jumper and pattern chart
Pattern diagram:
Snowflake pattern diagram:
36/38 (40/42) 44/46You will need
Yarn 1 (100% sheep wool; 120 m/50 g) - 450 (500) 500 g gray melange;yarn 2 (100% sheep wool; 120 m/50 g) - 50 g each of brown, yellow and purple; circular knitting needles No. 4, length 80 and 60 cm; set of double needles No. 4.
Patterns and schemes
Rubber
Alternately 1 knit, 1 purl.Facial surface
Front rows - front loops, purl rows - purl loops. In circular rows, knit all stitches.Jacquard pattern
Knit according to the given pattern in the round. Repeat rapport between arrows. In height from the 1st to the 60th rows, perform 1 time.Attention!
The number of loops in each rapport due to decreases in 10, 31, 43, 51 and 56 r. decreases, decreases are indicated in the diagram.
Decorative reductions
From the right edge: chrome, knit 2 stitches together;from the left edge: knit 2 stitches together with a slant to the left (= 1 stitch, slip as a knit stitch, knit the next loop, then pull the removed loop through the knitted one), chrome.
Knitting density
22 p. x 29 r./round r. = 10 x 10 cm, knitted in stockinette stitch using needles No. 4.Attention!
First, a round yoke is knitted from bottom to top. Then, from the yoke from top to bottom, the sleeves are knitted in a circle and the front and back are knitted in the same direction.Pattern
Getting the job done
Round yoke
Using a contrasting auxiliary thread, cast on 252 (288) 324 sts on long circular needles and close the row. Knit with gray melange thread in the round and 1st p. knit.Continue work jacquard pattern according to the given scheme, repeating the report (initially from 18 points) 14 (16) 18 times in a row. After 60 r. on knitting needles 112 (128) 144 sts.
Next, knit 1 r. gray melange thread, while evenly decreasing 14 (24) 34 sts, knitting 2 sts together with knit stitches = 98 (104) 110 sts. As the number of loops decreases, switch to shorter circular or stocking needles.
For the collar, knit with gray melange thread 20 cm = 58 r. with an elastic band, then close the loops according to the pattern. Distribute the stitches of the cast-on row as follows: 77 (87) 99 stitches for the front and back and between them 49 (57) 63 stitches for the sleeves. Leave your job temporarily.
Sleeves
With a gray melange thread, cast on 13 sts, left for the sleeve 49 (57) 63 sts. Knit the yoke with stockinette stitch, while unraveling the auxiliary thread of the cast-on row, additionally cast on another 13 sts = 75 (83) 89 sts.Continue working with stockinette stitch in rows in forward and reverse directions, while for bevels of sleeves in every 10 (8) 6th r. decrease from the cast-on row on both sides (see Decorative decreases) 11 (13) 15 times 1 p. = 53 (57) 59 p.
After 38 cm = 110 rub. from the yoke, do 6.5 cm = 20 r. Use an elastic band and close the loops according to the pattern.
Back and front
With a gray melange thread, knit 77 (87) 99 sts of the back, while dissolving the auxiliary thread of the cast-on row, cast on 24 sts from the newly cast on sleeve loops, knit 77 (87) 99 sts of the front, unraveling the auxiliary thread and from the newly cast on cast on another 24 stitches on the second sleeve = 202 (222) 246) stitches. Close off the row and knit in stockinette stitch in the round.After 88 r. = 30 cm from the yoke, do another 6.5 cm for the bottom bar = 20 r. with an elastic band and sing to close it according to the drawing.
