Monkey made from beads, step-by-step master class with photos. How to weave a monkey from beads: simple explanations and lessons How to weave a monkey from beads

Offered in the section beaded animals with patterns woven in a parallel weave. For the work, two shades of brown are used - dark and light, as well as a pair of black beads for the eyes.

The monkey is performed from the tail. To do this, you need to string 4 beads onto the middle of the wire and thread the wire through 2 of them twice so that its ends come out from opposite sides of the beads in the row. The 1st and 2nd rows of the tail are obtained.

3rd row: string two beads onto the left end of the wire brown and pass the right end of the wire through them, pointing it in the opposite direction. The next rows are woven in the same way as the 3rd, two beads in each row. In total, the tail consists of 24 rows.

1st row: string three beads onto the right end of the wire and thread the left end of the wire through these three beads from left to right.
2nd row: string five beads onto one end of the wire and thread the free end of the wire through them, pointing it in the opposite direction. Subsequent rows are woven similarly to the second, only the number of beads in each row changes:
3rd row - six beads;
4th row - eight beads;
5th row - six beads;
6th row - nine beads;
7th row - seven beads;
8th row - nine beads;
9th row - eight beads;
10th row - eleven beads;
11th row - nine beads;
12th row nine beads;
13th row - ten beads;
14th row - eight beads;
15th row - ten beads. Ears are woven from the 15th row. To make the right ear, you need to string six beads onto the free end of the wire and thread this end of the wire through the seventh, eighth, ninth and tenth beads of the row from left to right. To make the left ear, you need to string six beads onto the free left end of the wire and thread it through the fourth, third, second and first beads of the row from right to left.

Then continue weaving with the following number of beads:
16th row - six beads;
17th row - eight beads, while the third and sixth should be black - these will be the eyes of the animal;
18th row - six beads;
19th row - six beads;
20th row - four beads.
At the end of weaving, close the free ends of the wire.

Once the body is ready, you can proceed to manufacturing right hind paw.
To do this, you need to string six beads onto the middle of the wire and thread the wire through two of them twice. Thus, you will get the 1st and 2nd rows. From the 2nd row, the ends of the wire should come out from opposite sides.

4 - 12th rows: weave in the same way as the 3rd.

Then string five beads onto one end of the wire, wrap it around the fifth bead and thread it through the previous four, as if going back. In the same way, thread the wire through one of the beads of the 12th row. Repeat the same steps with one end of the wire and then with the other. Thus, there should be a total of five toes on the paw. Attach the paw to the beads of the 2nd and 4th rows of the body, then make left hind paw.

Next we move on to weaving. right front paw. To do this, you need to string five beads onto the middle of the wire, through two of them the wire should be threaded twice. You will get the 1st and 2nd rows. From the 2nd row, the ends of the wire should come out from opposite sides.
3rd row: string two beads onto one end of the wire and thread the other free end of the wire through them.
4 - 13th rows: weave in the same way as the 3rd.

At the end of the 13th row, string five beads onto one end of the wire, wrap it around the fifth bead and thread it through the previous four, as if going back, also thread the wire through one of the beads of the 13th row. Repeat making the finger with the same end of the wire, then with the other. There should be five fingers in total, just like on the hind legs. Attach the paw to the beads of the 12th and 14th rows of the body, then make left front paw. In this way the entire monkey will be woven from beads. Other beaded animals with diagrams and descriptions can be viewed

We are preparing for the New Year - the year of the monkey. A beaded monkey is a great and cute gift. In addition, we suggest you read how to do it, and also.

We weave a monkey from beads

Avoid kinks in the wire; weave the front and back on one wire, folding it like an accordion. When making a beaded monkey, make sure that both ends are tightened evenly.

To work you will need:

thin wire
scissors
beads brown and beige color
large dark bead for nose
2 small black ones for eyes

How to weave a monkey from beads

1. We start weaving a monkey from beads from its face.

2. We weave the ears in the 9th row on the same wire as the main part.

3. We weave the legs separately; to do this, we measure 2 even wires of approximately 0.5 meters each.
When weaving the paws is finished, do not cut the ends of the wire, but use them to attach the paws to the main part.

4. Let's move on to weaving a tail for a monkey from beads. For the tail, you need to add 4 rows of 2 beads each and several rows of one bead to obtain the desired length.

5. When the main work of the voluminous bead monkey is finished, do not twist the ends of the wire, but pass them through the previous few rows in the reverse order. Then the excess can be trimmed and the ends folded, thus, i.e. hide as much as possible.

Beaded monkey keychain

Monkey bead weaving patterns. Weaving with wire is very convenient because you can make a beaded monkey keychain from the finished product. This weaving allows the figure to be given different positions. Surely all your friends will immediately want such a beaded monkey keychain.
Beaded monkey patterns are very simple to make.

Necessary materials to get started:

How to weave a monkey from beads step by step?

So, we are making a monkey keychain from beads.
1. Let's start with the head. We take a thread 70 cm long and glue it to the table with tape, stepping back 10 cm from the end. We pass one large bead with a diameter of 10 mm through the other end. Next, we string small brown beads and throughout the work we give the product the shape of a head.

3. How to weave a monkey out of beads step by step so that everything works out? If after stringing for the 15th row it turns out that not all of the large beads were covered with beads, you can add additional rows.
In general, the bead should be covered with small beads on all sides.

4. The final step is to thread the thread through the beads into the first row and bring the ends of the thread together.
Weave a monkey from beads, following step by step instructions not hard at all.

5. We remove the tape, apply glue to the knot, pull the remaining thread through two or three beads and remove the excess ends.

6. Let's move on to weaving the body for the monkey from volumetric beads. We take a large bead and a thread 60 cm long. We weave the body according to the same principle as the head.

7. Attach the key chain. We shorten the pin to a length of 3 cm and stick it in, starting from the body and up to the head. We thread a chain through the resulting ring. Guided by the diagrams, you can weave a variety of monkey souvenirs from beads and other interesting figures.

The voluminous beaded monkey keychain is ready!

Be sure to check out the article: .

A SELECTION OF IDEAS AND SCHEMES

We continue our seasonal series of master classes on bead weaving for winter and New Year's items. Today we will make another version of the monkey - the symbol of 2016 according to the eastern horoscope. To make the monkey, we will use the technique of volumetric parallel weaving on two pieces of wire.

We will need:
- beads size No. 10/0: red, pink, black and white,
- wire with a diameter of 0.2 mm.

As I already noted, today we will use the technique of volumetric parallel weaving on two pieces of wire. We have already encountered this technique before, so before you start weaving a monkey, be sure to study this master class, in which this technique is described in detail.

The main idea of this technique is that each row of the product consists of 4 tiers: top, bottom, left and right. At the same time, during the weaving process it is necessary to strictly observe the sequence of tiers: first make the lower and upper tiers, and only then - the left and right tiers.

When weaving a monkey, the upper tiers of beads will form the front part of its head and then the stomach, the lower tiers of beads will form the back of the head and then the back, and the left and right tiers will form its sides.

As the basis for today's master class, we will use the following monkey weaving pattern:

For the monkey's body, along with the head and lower legs, we will need two pieces of wire, each 150 cm long. For weaving the ears and tail, three additional pieces of wire, each 25 cm long, are used, and for weaving the upper paws, two additional pieces of wire, each 60 cm long, are used.

So, we take two pieces of wire 150 cm long and start weaving:

1st row:
We do all the tiers of the first row in one step. We collect 2 red beads on one of the pieces of wire, and 4 red beads on the other piece of wire. We place the collected beads in the middle of our piece of wire, and then pass the ends of the first section (with fewer collected beads) through the outer beads on another piece of wire. We tighten the wire, trying to keep the beads in the middle of the wire (that is, so that all 4 ends of the wire are equal in length).
As a result, we got all 4 tiers of the first row: in the upper and lower tiers - 2 beads each, and in the left and right tiers - 1 bead each.

In all other rows we weave the tiers sequentially: first - the top, then the bottom, after that - the left and, finally, the right tier of the row.

Also note: since finished product in the section it should be round, after completing all the tiers of each row, you must immediately bend the tiers outward slightly, thus giving the woven row a rounded shape. It is very important to do this exactly after completing each row, since in some rows the number of beads will be very small, and after completing these rows it will no longer be possible to give a rounded shape to the previous rows.

We continue weaving.

2nd row:
The top tier is 5 pink beads.

3rd row:
Upper tier - we collect beads in next order: 1 pink, 2 white, 2 pink, 2 white, 1 pink.

We take two additional pieces of wire intended for weaving ears, and pass them through all the beads, respectively, of the left and right tiers. After that, we leave these additional pieces of wire alone for now and continue weaving on the main pieces of wire.

4th row:
Upper tier - we collect beads in the following order: 1 red, 1 pink, 1 white, 1 black, 1 white, 1 pink, 1 white, 1 black, 1 white, 1 pink, 1 red.

Left tier - 3 red beads.
Right tier - 3 red beads.

5 row:
Upper tier - we collect beads in the following order: 2 red, 1 pink, 2 white, 2 pink, 2 white, 1 pink, 2 red.

Now we take the ends of additional pieces of wire directed towards the lower tiers, inserted into the side tiers of the 3rd row, and pass them through the corresponding side tiers of the current row towards the upper tiers.

After this, we align the ends of additional pieces of wire and immediately weave monkey ears onto them.

Both ears are the same, we make each of them using the technique of flat parallel weaving according to the following pattern:
1st row: 1 red, 1 pink, 1 red beads.
2nd row: 1 red, 2 pink, 1 red beads.
3rd row: 3 red beads.

6th row:
For the upper tier, we first collect 2 red and 11 pink beads onto one of the ends of the wire intended for this tier, move all these beads close to the main part of the product, then hold the last 5 collected beads and pass this end of the wire through the previous 5 beads of the current set along direction from the side of the product outward (that is, through the fourth to eighth beads, not taking into account the color). Next, we tighten this end of the wire, put 1 more pink and 2 red beads on it, and then pass the second end of the wire, intended for the current tier, through 11 consecutive beads of the main part of this tier. We tighten the wire - we have a top tier with an additional piece of 5 pink beads lying above it.

We continue weaving the remaining tiers of the 6th row:

Bottom tier - 11 red beads.
Left tier - 4 red beads.
Right tier - 4 red beads.

7th row:
In the upper tier of this row we again make an additional section of beads. To do this, first we collect 1 red, 7 pink, 2 red and 1 pink beads onto the wire, move all these beads close to the main part of the product, hold the last 4 collected beads and pass this end of the wire through the previous 4 beads of the current set towards the side of the product outward (that is, through the fourth to seventh beads, not taking into account the color). Next, we tighten this end of the wire, put 2 more pink and 1 red beads on it, and then pass the second end of the wire, intended for the current tier, through 10 consecutive beads of the main part of this tier. We tighten the wire - we have an upper tier with an additional piece of 4 beads lying above it.

We continue weaving the remaining tiers of the 7th row:

Left tier - 3 red beads.
Right tier - 3 red beads.

8th row:
Upper tier - we collect beads in the following order: 2 red, 5 pink, 2 red.

Left tier - 2 red beads.
Right tier - 2 red beads.

9th row:

Left tier - 2 red beads.
Right tier - 2 red beads.

10th row:
Upper tier - 7 red beads.
Bottom tier - 7 red beads.
Left tier - 2 red beads.
Right tier - 2 red beads.

We take two additional pieces of wire intended for weaving the upper legs of the monkey, and pass them through, respectively, the left and right tiers of the current row. After that, we leave these additional pieces of wire alone for now and continue weaving on the main pieces of wire.

11th row:
Upper tier - we collect beads in the following order: 3 red, 3 pink, 3 red.
Bottom tier - 9 red beads.
Left tier - 3 red beads.
Right tier - 3 red beads.

Now we take the ends of additional pieces of wire directed towards the lower tiers, inserted into the side tiers of the 10th row, and pass them through the corresponding side tiers of the current row towards the upper tiers. We align the ends of the additional pieces of wire and immediately weave the monkey’s upper paws onto them.

The monkey has all 4 paws the same, we begin to weave each of them using the technique of volumetric parallel weaving on one wire (that is, we use 2 ends of the wire for each paw and make the upper and lower tiers in each row).
The first 7 rows are the same: both the upper and lower tiers of each row consist of 2 red beads.
We weave the next two rows with a flat parallel weave.
8th row: 2 pink beads.
Row 9: 3 pink beads.

Next, we select the end of the wire that is directed downward (that is, towards the future continuation of the monkey’s body) and at this end of the wire we make fingers from pink beads. We no longer need the second end of the wire for weaving.

So, first we collect 5 beads on the wire, hold the last bead collected and pass this end of the wire in the opposite direction through the previous 3 beads. Then we move all the beads from the last set close to the product and tighten this end of the wire. Next, we pass this end of the wire through the very first bead from the last set, leading the wire from the side of the product in an outward direction. We've got our first finger.

Next, we make the second, third and fourth fingers in a similar manner, only for each of them we use one bead more than for the first finger: we collect 6 beads on the wire, hold the last bead collected and pass this end of the wire in the opposite direction through the previous 4 beads. Then we move all the beads from the last set close to the product and tighten the wire. Next, we pass this end of the wire through the very first bead from the last set, leading the wire from the side of the product in an outward direction.
I repeat that in this way we make three fingers sequentially one after another (from the second to the fourth in a row).

To make the fifth finger, we string 3 beads onto the wire, hold the last bead cast on and pass this end of the wire in the opposite direction through the previous 2 beads. Then we move all the beads from the last set close to the product and tighten the wire. The fifth finger is ready.

We fasten and cut both ends of the wire - the paw is ready.

After we have made both upper legs, we continue weaving the monkey’s body.

Row 12:
Upper tier - we collect beads in the following order: 2 red, 6 pink, 2 red.
Bottom tier - 10 red beads.
Left tier - 4 red beads.
Right tier - 4 red beads.

Row 13:
Upper tier - we collect beads in the following order: 2 red, 7 pink, 2 red.
Bottom tier - 11 red beads.
Left tier - 4 red beads.
Right tier - 4 red beads.

Row 14:
Upper tier - we collect beads in the following order: 1 red, 10 pink, 1 red.
Bottom tier - 12 red beads.
Left tier - 4 red beads.
Right tier - 4 red beads.

Row 15:
Upper tier - we collect beads in the following order: 2 red, 8 pink, 2 red.
Bottom tier - 12 red beads.
Left tier - 4 red beads.
Right tier - 4 red beads.

Row 16:
Upper tier - we collect beads in the following order: 3 red, 6 pink, 3 red.
Bottom tier - 12 red beads.
Left tier - 3 red beads.
Right tier - 3 red beads.

Row 17:
Upper tier - we collect beads in the following order: 4 red, 3 pink, 4 red.
Bottom tier - 11 red beads.

We take an additional piece of wire intended for weaving the tail and pass it through the middle bead of the lower tier. After this, we align the ends of this additional piece of wire and immediately weave the monkey’s tail on it, using the flat parallel weaving technique:
The first 14 rows are the same, each row consists of one red bead, and the last - the 15th row - the tail row consists of one pink bead.

After completing the weaving of the tail, we continue weaving the remaining tiers of the 17th row:
Left tier - 3 red beads.
Right tier - 3 red beads.

Row 18:
Upper tier - 8 red beads.
Bottom tier - 8 red beads.
Left tier - 2 red beads.
Right tier - 2 red beads.

Row 19:
Upper tier - 5 red beads.
Bottom tier - 5 red beads.
Left tier - 2 red beads.
Right tier - 2 red beads.

The weaving of the monkey's body is completed. At the remaining ends of the main wire we weave two lower legs. I repeat that all the paws of a monkey are the same, so the technique of weaving the lower paws is the same as the upper ones.

After we have made both lower legs, the monkey is completely ready.

Since the weaving was carried out on two pieces of wire at once, the finished figurine should hold its shape very well and not require additional stitching at all.

Small figurines of monkeys woven from beads will definitely appeal to both adults and children. There are two options for creating animals in beadwork. In this article you will find patterns for volumetric and flat weaving of monkeys from beads. You will also learn how you can and should weave a funny monkey out of beads yourself.

How to weave a three-dimensional monkey from beads in a step-by-step tutorial

A three-dimensional monkey is woven using the parallel weaving technique. The diagram is quite detailed and will be easy to understand even for beginners.

According to this pattern, the monkey will turn out without a tail, but it weaves easily, you can add it yourself if you want.

Required materials:

beads of two colors for the body: brown and beige;
two black beads for the eyes;
1 larger bead for the nose;
wire;
wire cutters

Let's start weaving. Using wire cutters, cut a piece of wire about a meter long from a skein. We collect 7 beige beads on it. This is the first row of our product. Let's pass the wire through all the beads again and tighten it to make a ring. We got our monkey's sponges.

Now we put 3 beige beads on one end of the wire, and pass through them with the other end. This is the bottom row, so you need to bend it away from you. We will weave the next rows in the same way, alternating the top and bottom rows.

On top of these three beads will be the next row, in the center of which will be the animal's nose. To weave it, we put on 3 beige beads, one large bead for the nose and again 3 beige beads.

To weave the next bottom row, string seven beige beads, in the next top row we string eight beads in this order: one bead of brown, one beige, one black, two beads of beige, one black, one beige and one brown . This sequence is indicated in the diagram.

Weave 3 more rows according to the pattern. Now we will weave our monkey's ears. Each ear will consist of 7 beads. To make the ears, thread each end of the wire between the second and third beads from the edge of the last row. When weaving, check the diagram and photo.

After we have woven the head, it's time to move on to the body. We will weave it from brown beads, stringing them in the quantity indicated in the diagram. When you reach the area where you want the legs to be attached, insert additional wire into the finished row. A little later we will weave paws on it.

To give the product the required volume, you can insert a pencil into the body. And then fill the figure in a plastic bag or plaster.

When weaving the body is finished, you need to move on to weaving the legs on those pieces of wire that we inserted earlier.

To create the paws, you need to weave nine paired rows of 2 beads each.

We will finish the legs with beige beads, using the flat weaving technique.

We weave the first row of two beads, the second row of three and the third row of four. Then intertwine five fingers according to the pattern. And our voluminous funny monkey is ready!

Trying to make a flat craft using the beading technique

Children who are interested in weaving animals from beads will really like this monkey. It is perfect for decorating a children's room.

Here is a pattern for weaving a flat monkey.

To weave it you will need beads desired color, a piece of wire about a meter and 15 minutes of free time.

As shown in the diagram, weaving an animal must begin from the head. We weave the first row as follows: we put six beads on the wire and place them in the middle. After this, we string seven more beads for the next row and pass through them with the opposite end of the wire. Next, string the beads of the third row onto one end of the wire according to the pattern, and thread the other end through these beads in the opposite direction. We continue weaving according to the pattern. Don't forget that the figure should be flat, so watch the placement of the rows. While weaving, tighten the wire so that the beads fit tightly. The remaining wire at the end of weaving must be twisted together and cut, or made into a tail.

Video on the topic of the article

You can also weave monkeys using the video.