Modern technologies allow the old furniture to give a second life. The craftsmen manage to repaint her completely. But for this it is necessary to prepare furniture items to prepare for this process by removing the previous coating. This is a labor-intensive process that needs to be done correctly. Otherwise, the material can be irrevocably spoiled. How to remove the old varnish from a wooden surface - the main question, to answer which we will try in this article.

There are several: mechanical, thermal and chemical methods for removing the old layer of varnish. Apply them should be used depending on the personal preferences and states of the material itself.

Mechanical method

The most common lacquer removal method from furniture or other items is mechanical. It consists in performing cycloying, that is, mechanical removal of the old coating using various tools. These include:

  • metallic slightly sharpened plate;

  • sandpaper with varying degrees of graininess;

  • grinding machine;

  • bulgarian with a special nozzle.

All listed methods are treated with surfaces on which a small layer of varnish or paint is applied. Using electrical appliances, it is necessary to carefully monitor not overdo and not damage the structure of the tree.

The positive characteristics of the processing mechanically include the complete absence of chemical compositions that adversely affect the human body. The structure of the material is also preserved. It is only necessary to polish carefully, and get almost a new element of furniture. To the shortcomings are quite a long and grueling process that requires considerable effort and patience. Especially if you do not use the technique, but to perform everything manually.

It is worth considering that under cycloying or grinding a lot of fine dust is formed. Therefore, it is necessary to work in a mask and protective glasses.

Technology implementation

Consider in more detail how to remove the lacquer with the tree mechanically. So, for the beginning, we set in materials:

  • wooden bar;
  • sandpaper of varying degrees of abrosiness;
  • brush with metal bristles.

Start the process follows from the preparation of the product. If it is a piece of furniture, then it should be pre-disassembled to separate elements for the convenience of work. Then perform work according to the following instructions:

  • complete processing of old varnish on the surface of a metal brush;
  • then take sandpaper with a large grainy, pre-secure it on the wooden bar, and the longitudinal movements on the area of \u200b\u200bthe product gradually remove the old layer;
  • after the lacquer is completely removed, change the sandpaper on another with small abrosiness, and carefully seel the surface to the perfectly smooth state;
  • at the end, we carefully clean the wooden item from small dust and proceed to other types of work.

Please note that when processing surfaces with a large area, for example, with a parquet board, it is better to use cycles.

Heat treatment

Remove the lacquer with a wooden surface can also be in a thermal way. The process is performed by heating the lacquer layer. As a result of an increase in temperature, a paint material melts, and its hitch with a wooden surface decreases. This method has several important nuances:

  • Work should be done carefully. It is necessary to use in special gloves that will protect the skin of the hands. The room must necessarily be ventilated so that there is no accumulation of toxic and carbon monoxide during processing. You should also think about glasses to protect your eyes, as the removal of the lacquer with a spatula can form fragments that may accidentally damage organs of vision.
  • Sometimes during heat treatment, the coating does not melt, but begins charring. In this case, it is better to choose another way to remove a varnish from a tree. Best of all, such a varnish coating is removed by chemical cleaning.

Important! Be sure to adhere to all necessary fire safety rules.

On video: Removing the factory varnish.

Article on the topic: Impregnation of plywood for moisture resistance: 4 proven method

Instructions for thermal treatment

Before removing the lacquer with a wooden, for example, doors by means of heat treatment, you should define the tools that are used when performing this process. Specialists advise paying attention to two of them:

1. At home, a burner on gas or gasoline is very often used. This is the best option, it is affordable, the price is not large and the cost of refueling also does not cause difficulties. The disadvantage of this method is an increased degree of fire and burn burns. That is, the burner is working if there are at least a small experience.

2. A more advanced way is the use of a construction hair dryer. Work with it is quite simple. The temperature that hair dryer can work out is 600 C.

The process of heat treatment performs very simple. To begin with, a certain part of the surface is heated until the bubbles occur, and then neatly with the help of a metal spatula comes up and removed. The advantage of the method given is high processing speed, but requires a certain skill.

After the removal of the coating is completed using heat treatment, the surface must be stabbed using sandpaper. Pay special attention to the end parts of the items.

Chemical method

Let's talk about how to remove the old varnish from wooden surfaces by chemical processing. This method is often used when removing a varnish coating from wooden items that have no uniform texture. Different chemical compositions are used to implement this process: powder, gel, liquid and solvent.

The means for removing the old coating in the form of a liquid is applied appropriate if on wooden items applied to three layers of the paint coating. It is justified by the fact that the washout for varnish from the tree has a high degree of volatility, and it is not capable of quickly and deeply absorb in paint layers.

Article on the topic: How to Protect Tree with Natural Olif

The optimal embodiment for items that have a multi-layer old coating are gels and varnishes. But the powders are better to use when performing work with a large area of \u200b\u200bprocessed surfaces.

Tip! Washing in the form of a powder will work more efficiently if you add a small amount of water in it and bring to a paste-like state. Gel and powder washes are capable of one application to wash up to ten layers of paint.

Washing technology

Now let's tell you in detail how to remove the varnish with the help of chemistry. We note that it consists of four stages. And with any of them, it is necessary to adhere to a high degree of skin protection, eye and respiratory organs. We give an example, how can I remove lacquer with a wooden door:

  1. With the help of conventional brushes for staining, it is uniformly washing to the surface of the door. Application should be carried out so that the means to the surface is imposed only in one layer.
  2. Works in strengthening the effect of varnish dissolution and preventing the evaporation of the composition. For this, experts recommend to "wrap up" the door with a polyethylene film. The time to leave the door in such a state is about 3 hours. If the number of layers is large, then you can extend the exposure to the solvent to 4 hours.
  3. It is necessary to remove the dissolved layers of varnish with a metal spatula. In order not to damage the structure of the tree and not to leave a large number of dents, the spatula for such work should be prepared. His edges need to appeal a little to round them. Press the spatula is not needed too much.
  4. It is necessary to wash off from the surface of the door the remains of chemical solvents. Use ordinary water for this. For a better effect, rinse the compositions with acetic solution in the ratio: on 5 parts of water 1 part of vinegar. Work should be carried out carefully, but in a short time, after which the product is covered with new varnishing.

Article on the topic: Change the interior with the hardification of wooden furniture

Most often, it is not possible to achieve the desired result at a time. In this case, the process must be repeated. If after the first processing there were minor sections of varnish, they can be removed by means of sandpaper.

This method of removing the lacquer with a wooden surface can be used both for large elements and for small. For example, you can wash off acrylic varnish with decorative interior items or remove the lacquer with the wall paneling in the bath. Wash off the chemical compositions of lacquer with chipboard is not recommended, since the chemical elements can spoil its structure. For this process, products are suitable only from natural wood.

In all the above-mentioned technologies for the removal of old lacquer from wood there are no special difficulties, which allows you to perform the process with your own hands. But the work must be performed with all the necessary precautions. If there is no confidence in your own power, then it is better to trust the professionals.

Removing the old varnish with the burner (1 video)

Washing for paintwork coatings (21 photos)






















You will need

  • - brush,
  • - film,
  • - putty knife,
  • - latex gloves,
  • - protective glasses,
  • - metal brush,
  • - knife,
  • - grinding paper of different graininess,
  • - Sander,
  • - water tank,
  • - a few sponges or rags

Instruction

Use the wash (special composition) is a traditional way to remove an old lacquer coating with wooden items. It is unlikely to wash off the coating for one reception, so tune in to a rather long process. Abundantly apply washes on the surface being processed and distribute it uniformly with a brush.

So that the wash is not dried, cover the processed part with a film or polyethylene. After a day, remove the wash with a spatula, separating the varnish from the tree. First, try separating the wash and varnish in some one place. If the coating is not completely, apply the wash again, again for a day. If you need to handle embossed parts, use a soft metal brush or knife blade.

Removing a washes and coating, rinse the product being processed in warm water to completely remove all chemical components of the cleaning. Then leave the product to dry (no less than a day).

You can remove lacquer by firing, just do not allow the coagulation of the product. Soften the layer of varnish by a solder lamp or a technical hair dryer. Heat small sections until the coating is melted.

Work two: in one hairdryer or solder, in another spatula, which scrape the softened varnish. As soon as the coating begins to bubble go to smoke, stop the heating to avoid charring.

An old coating can be removed by mechanical manner, with a grinding or cycle, but be careful not to damage the wooden product itself. If the lacquer is already moving away from the tree with layers, remove it with a rigid metal brush, and in hard-to-reach corners - the blade of a spatula or a large screwdriver.

An old varnish coating can also be removed using an eccentric grinding machine and coarse grinding paper. In this case, work in a protective mask, as the grinding machine produces a lot of dust. Having processed the detail of coarse sandpaper (grain from 80 to 120), go to paper with a grain of 180.

It is possible to remove the varnish with a "wet" way: Moisten the part with a wet sponge and grind it with paper with grainy 80 and 120, periodically moistened to the workplace. At the same time, dust is not formed, and varnish from wet friction turns into a thick mass, which is easy to remove.

The processed part is thoroughly wrapped with a damp sponge, after drying again, go through the surface of small sandpaper. After that, the item is ready for further processing.

Very often before painting a tree with varnish, it is necessary to remove the old lacquer coating. And this in most cases becomes a problem, because a person without experience in this business, as a rule, come to mind the wrong ideas regarding the choice of paint removal. As a result, the surface being processed simply will simply determine.

In this article we will tell about what technologies are and, in which case, one or another way to remove an old lacquer with a wooden plane will be relevant.

In addition, we will consider step by step, how to paint a tree with varnish again.

Let's start the review.

Ways of stripping old varnish

It is worth noting that the most popular technologies for solving this issue are considered below. And it is important to understand that there is no universal lacquer removal method, which can be successfully used absolutely in all cases ().

The choice of method depends on many factors:

  • From the type of base - Floors need to be treated or furnished, agree that the difference between the approach here will clearly be, and significant.

  • From the type of old varnish. Makeups are different, and accordingly, each individual lacise must be selected by some particular removal method.
  • From the thickness of the layer. After all, remove one fine layer from the surface of the tree, this is not at all the same thing that it is cleaned about a dozen old layers.

So nuances seem to have enough.

Let's go back to the review.

Himsostabum processing

This method of removal of varnish implies a very simple work scheme - any chemical composition is applied to the surface of the tree, thanks to which the layer of old paint begins to peel and lag behind the wood.

Please note that it is not worth and try to remove the old lacquered surface on furniture or chipboard panels. Because with a layer of varnish you remove the main decorative film, after which you can, in principle, forget about the beauty of the appearance. Varnish can be effectively removed only from the plane of a natural tree!

Delete varnish can be gels, powders, special liquids, or simply universal solvents such as acetone, for example.

What to choose? Let's try to give more or less universal advice.

If your wood is covered with shellac, then it will be more efficient and faster to clean the old layer of the most common denature.

Liquid compositions are good where you need to remove a maximum of several layers. This is because the fluid is quite quickly disappeared, and accordingly, because of this it can not absorb deeply.

Powders are relevant in cases where the scope of work is very large, so these materials are capable of long.

Gels and pasta are conveniently used to clean a large number of layers of old paint or varnish.

Now about the sequence of work - a brief instruction on the removal of varnish with the help of chemistry.

  1. We take a brush, loyering it into the liquid and apply the composition on the working plane. At the same time, it is necessary to try to apply a mass so that the brush "walked" in one direction and did not take one and the same site twice.
  2. The entire processed surface is to cover with the film - in order for the applied washout to be disrupted and absorbed as deeply as possible. Keep the film needs about 1-4 hours. Here the rule is simple - the more layers need to be removed, the longer we do not remove the film. But in principle, if you can see that the paste has changed its color, darkened, and the varnish as it were swept, then you can begin to the next stage.
  3. We take a width of 10 cm. And begin to gently remove the old varnish. At the same time, look at the thickness of the layer - if it is thin, it may be enough to walk along the surface of sandpaper.

Tip: Since, most likely, you will get a standard spatula - with sharp edges, we recommend the grinder slightly rounded them. Just if the edges are sharp, that is, the risk of damageing the tree directly during the removal of varnish.

  1. Now you need to neutralize the chemical effect of washing on the surface. This operation is suitable or ordinary water, or water with the addition of vinegar. Just take and wash off all chemistry. After that, we wipe the plane with a flannel cloth and wait until the wood dry out.

Here is such a technology.

Tip: Work with chemicals very neat. Use protective gloves, respirators, well ventilate the room. Otherwise, you can cause significant harm to your own health.

Consider the following variation of varnish.

Mechanical cleaning

In fact, this method is the cycloration of the surface, that is, the most common sniffing of the layer using a special tool. The tool is an acutely sharpened plate of steel, which is fixed at an angle to increase the pressure on the wooden plane with varnish.

Also, the mechanical method can also be attributed to the surface of the sandpaper manually or with the help of grinding. This, in other words, the ordinary Bulgarian, which is attached to a circle with sandpaper. This method is good, but you need to consider that it is only suitable for planes, in which the thickness of the layer is small.

What is the main advantage of mechanical removal of varnish, so this is that chemistry is not used, that is, there are no sharp and toxic smells. In addition, the wood itself does not deteriorate from the effects of fluid and moisture.

As for the minuses of technology, they are obvious - to clean the surface with the help of a squad machine or the same emery will have long and tediously. So if you delete the lacquer with your own hands using the mechanical way, then be patient. Yes, and the forces here will also be needed.

By the way, there is another important point, which must certainly consider. While working with grinders, the work surface in the air is very dust. So in such a situation, if the work is performed in the residential room, be sure to cover all valuable items.

Tip: If you need to handle a large area, such as floors or walls, then it is possible cheaper and easier to hire a specialist who has expensive professional equipment for the cyclove tree. In most such cases, if you recount how much time to spend on an independent work, it almost always turns out that it was cheaper to hire the wizard.

And we will analyze another way of removing the old varnish.

Heat treatment

The meaning of this technology is that the surface of the tree is heated and due to this, the lacquer layer begins to lose the adhesion strength with the plane. That is, it cracks and at this time it is necessary to seek a spatula (or a chisel) and gradually cleaned the whole area.

There are two important points here.

  • FirstlyYou need to work in protective glasses, gloves and in a well ventilated room. This is because during the heating, the lacquer begins to allocate harmful evaporation, and during the sweeping the trowel can easily be painful hands or eyes - pieces of varnish can be elementary off the surface. Well, of course, you need to follow fireproof work.
  • SecondlyIf you see that when heated, the lacquer began not to derain, but simply harbor, then this is a sure sign that the composition of this paintwork is such that if it can be deleted, then only with the help of chemical compositions.

Now it concerns tools.

You can use two instruments:

  1. Conventional gas or gasoline burner. The way this thing is convenient, so this is the fact that the price of it is quite low. But to use the burner is needed with high caution, because there is a work with open fire.

  1. Construction hairdryer. In fact, the tool externally resembles a typical hairdryer, only the heating temperature at the construction counterpart is much higher - about 600 degrees.

The technology of thermal treatment of the surface is definitely good, so this is the fact that the splashing rate of the varnish is very high here. You do not need to wait anything - the plot was heated, I cleaned it and everything, go to the next point.

In principle, the main technologies for removing the varnish We looked at, now let's "for complete picture" briefly understand how to properly paint a tree or paint.

Procedure for applying a new paintwork

The approximate scheme of work should be like this:

  1. The whole wooden surface is grouped by sandpaper. Usually, first work with a large fraction, and then gradually go to fine-grained paper.
  2. Then the tree is protected from rotting, reproduction of bugs, the appearance of mold. It is done very simply - the antiseptic fluid is poured into a special jar, and the brush is applied to the entire wooden plane. Moreover, it is necessary to try to impregnate the tree as much as possible so that the antiseptic is penetrated as deeply as possible inside the wood structure.

  1. After the antiseptic layer is completely dry, we take the simile, paint or varnish, and gently apply to the surface of the tree into one or more layers. As a rule, it is done either with a brush or roller.

The main thing is necessary to wait for the complete drying of each previous layer and then everything will be fine!

All - let's summarize.

Output

We looked more or less in detail how to remove the old lacquer layer from the wood. In addition, they disassembled step by step, how to properly paint the tree anew. I want all the information provided to you in practice ().

Well, and if you wish to learn more useful information and tips, you will certainly browse the video in this article.

Every time you change the old furniture on a new one is far from all, as it can do it expensive. Therefore, the loving dining table, comfortable chairs or a spacious wardrobe do not really want to throw away. But this is not necessary, since you can give a second life to the second life.

It will be enough to remove the lacquer, which gives furniture untidy and shabby, and cover the products with a new layer of varnish. And all this can be done at home. But it is necessary to know in advance how you can wash the old varnish from the tree, and how quickly and efficiently get rid of the old coating. There are several proven methods with which you can remove an old coating from a wooden surface.

Mechanical method

Popular mechanical method, thanks to which you can achieve an excellent result and perfectly prepare the surface to repair. This method has one substantial plus - the absence of any chemicals. But at the same time, be prepared for the fact that the process can be long, and it requires special accuracy.

To carry out the mechanical removal of old coating, you will need tools. It is possible as a tool to take a metal plate, which should be pre-sharpened. It must be done so that the tool is better coping with the task.

The sandpaper of various types also may well help in this matter. A bristle brush from metal will be useful at the very beginning of the preparatory work. You can also use a grinding machine or even a grinder that will need to be equipped with a special nozzle.

You can apply the mill, if it is in your home.

All of the above tools will help cope with a small lacquer layer. When using tools such as a grinding machine or Bulgarian, it is recommended to be extremely careful not to damage the structure of the product itself.

Do not forget about personal safety methods. Perform work should be done in gloves, in the respirator and protective glasses, since during cleaning there will be a lot of shallow dust, which is strictly not recommended to breathe.

Order of work

Before proceeding with the process of removing the old varnish, you need to prepare furniture. The old table or sofa will need to disassemble so that you can carefully process every item. With the door to shoot an old coating will be easier.

Prepare a special place at home, cover the floors with a film so as not to spoil the surface. It is advisable to spend all the procedures on the street, but if there is no yard, then you can do it at home.

The surface of each part must first be subjected to coarse processing., Be sure to use a special brush, which was mentioned above. Next comes a turn of application of coarse sandpaper, which also need to carefully treat the entire surface to remove the entire old layer.

After removal of the old coating, the surface of the furniture is fine-grained paper should be treated to carry out the so-called grinding. After this procedure, the smooth and clean surface should be obtained that it is necessary to get rid of small dust. Make it can be very fast, especially if you have a big and soft brush.

The grinding machine can be useful if it comes to a large surface.

For example, if it is a big wardrobe or table.

Chemical method

Many are afraid of the mechanical cleaning method only due to the fact that you can spoil the surface, damage the tree. In this case, it is recommended to pay attention to the chemical method, which is also effective so that you can easily do everything with your own hands. This method is perfect in the event that you need to remove an old coating with an uneven, corrugated or carved surface.

To date, there are many special funds that are called washes. It can be liquid, powder or gel. The liquid is perfect in the event that the product has a maximum of three layers of varnish. For multilayer coatings, gels are suitable. And the means for removing the lacquer in the form of a powder will be perfect for the surface with a large area.

If you choose a powder as a means for removing the varnish, then it is recommended to dilute it a little before use. It will be easier to apply a thick casseau to the surface, and so the tool will more effectively cope with its task.

The total algorithm for working with chemicals includes the following steps:

  • Before starting work, put on gloves, respirator to securely protect yourself. Remember that you are not dealing with aggressive chemicals. Otherwise, the preparation process is similar to the one that is recommended in the case of the application of the mechanical method.
  • To the prepared surface with a smooth layer using a conventional bruster for paint, a flushing fluid should be applied evenly. It is necessary to apply it only in one layer, and after the product should be covered with a film. After a couple of hours it will be possible to open. In the event that layers of varnish more than three or four, then under the film, the product needs to be left for four hours or more.

  • After the film is removed, you need to safely remove the lacquer layers using a conventional spatula. Try not to work with pressure and do not take too sharply sharpened spatula, otherwise the wooden surface will be seriously damaged.
  • Next, you can wash off the remains of varnish with ordinary water. In order to clean the surface, you can add some table vinegar to the water. On a liter of water use only one tablespoon of acetic essence. After that, the product will be prepared to cover it with a new layer of special varnish.

  • In the event that the above method did not help completely get rid of all the layers of the old coating, it is worth repeating the procedure. If only small sections with old varnish remained on the surface of the furniture, then they can be easily removed using sandpaper.

In the case of powder or aerosol, you need to follow the same instructions.

Other methods

In addition to the methods described above, there are other methods of cleaning, which in professional circles is called thermal or thermal. Using this method, the old coating from furniture is removed by heating the surface. From high temperature, varnish begins to melt a bit and easily lags behind the material.

Undoubtedly, this method requires more thorough preparation, and non-professional needs to approach the process with knowledge.

  • Be sure to protect your hands with special gloves. If you use ordinary rubber, then during strong heating of the surface of the furniture, you can get a serious burn.

  • The room in which the whole process will occur should be well ventilated, otherwise you can get toxic poisoning.
  • Do not forget about the respirator and protective glasses.

In order to carry out thermal cleaning at home, you can use a gas or gasoline burner. It is possible to work with this unit only if you do it for the first time. Newbies due to inexperience can create dangerous conditions, a fire may occur, or you can get serious burns. Therefore, it is recommended to strictly adhere to security rules.

Wooden floors are often covered with special protective equipment (most often polyurethane or acrylic varnishes) that form a beautiful matte or glossy film. The surface of such a floor becomes elastic, durable, resistant to abrasion and formation of scratches. However, it is sometimes worth updating the coating so that it increases the operational characteristics of the tree. Especially since the lacquer dries, how many layers are neither apparent quickly (1-2 hours). And for this you have to remove (rinse) the protective layer of varnish from the floor.

About how the application of the acrylic means is happening and the technology of its removal is consistent before the next coating, we understand below.

Important: Ruff acrylic varnish from a wooden surface before applying a new coating layer. Otherwise, too much a layer of a protective material that dries quickly, simply swell over time and tears with ugly pieces.

Lacquet Removal: Methods


The newest and easiest way to remove the lacquer is to wash it. Especially since the price of the means starts from $ 3 per 1 kg. The technology of removing acrylic coating is to apply to the wooden surface of a special chemical agent that corps the lacquer and lifts it from the tree.

In modern stores, you can purchase chemical washes in the form of powder, creamy paste or finished liquid, the use of which today is sufficiently distributed. In the first case, it is necessary to mix the components of the tool in accordance with the instructions specified on the package. In other embodiments (cream or liquid composition), the washing is ready for use.

Lacquer removal technology, or how to wash out the old coating:

  • We prepare a chemical wash with a method for thorough mixing;
  • We remove all furniture items from the room;
  • We apply a chemical composition with a comfortable brush or roller for the floor;
  • Processed coating cover with film and wait 1-2 hours;
  • Now you can neatly with a spatula, not rigging wood, remove the old lacquer acrylic coating. If the floor will remain on the floor, the unwinding seats will remain, you can once again handle the floor with a wash.
  • When working with a brush or roller, it is important that the tools move in one direction and have not been treated twice the same section of the floor.

Important: One application of a chemical means to remove a varnish can cope with 2-3 layers of coating. At the same time, the powder preparations are overcome up to 10 layers of acrylic varnish. The flow rate of the powder chemical washing is equal to mixing 1 to 10. What is very profitable.

  • When the old coating layer is removed, the floor must be rinsed with water with a detergent and thoroughly dry the tree.
  • Before applying a new varnishing agent, a floor should be covered with a layer of antisitic primer. How many layers of antiseptic to apply, solve you. But it is better at least 2 times. Brushes or roller, primer will subsequently protect the tree from rotting, mold and bugs.

Several tips:

  • In working with the use and use of chemical cleaning for the removal of the LKM, use spatula with rounded edges. So you will reduce the risk of damage to the carpet boards. You can purchase such an inset in a specialized store (its price is 0.3 $ PC.).
  • Do not forget about protective equipment - Mask and gloves. Their price is also available in specialized stores. Therefore, it is not worth saving on health.
  • Check the room more oftennot to poison chemistry volatile couples.

Mechanical removal of varnish


  • Remove acrylic lacquer with floor can also be a primitive cyclo. To do this, you can use either a grinding machine or a professional unit. In the first case, you can do the work independently, but it is necessary to use protective glasses, a respirator and headphones. Schlifmashin should be promoted on the floor from the walls to the room center and closer to the exit. All wood and varnishing dust subsequently remove the vacuum cleaner.
  • In the second case, it is better to invite specialists. Since the handling of a heavy cycles requires skills. The price of floor processing work will depend on the square, but on average ranges from $ 5 / m2.

If you decide to cope with the cyclum apparatus, then consider some features:

  • When the unit is turned on, it is better to lift it better because the grinding elements can deepen in the floor boards and ugly deform it;
  • When turning the car indoors, it is also recommended to raise a bit of the aggregate;
  • It is better to move around the perimeter first diagonally and only so that the grinding unit is slightly passed to the brass in the already processed strip. After it is worth changing the direction of the unit in the opposite direction diagonally.
  • Laca removal in this way can be carried out both in large rooms and in small.

IMPORTANT: After processing the floor with a cyclical machine, it is necessary to remove the residues of dust (how much would it be) and repaired, if necessary, spoiled floor elements. Cover the tree with new layers of LKMs need a brush or roller, moving along the fiber tree.

Thermal method


Here, the technology for removing acrylic varnish is to heat the floor. Under the local exposure to high temperatures, the LKM will begin to swell and depart from the tree.

You can use for work or a soldering lamp or a construction hairdryer. In the first case, work will move a little slower.

Important: To fulfill such technology, you need to stockpons, gloves, respirator and a rounded spatula. Do not forget to play the room well.

Technology performance:

  • Paul cooked with varnish, fully released from all furniture items;
  • The heating device locally increase the floor temperature;
  • Loofing lacquer immediately remove with a spatula, moving further around the room.

Important: If in the heating process, the varnish is charred, this suggests that its composition requires a chemical cleaning intervention for removal. Therefore, heat treatment here is not your case.

Floor varnishing in new


  • Application of new lacquer layers must be carried out only on the prepared floor. Therefore, you first have to dry the boards and clean them from dust.
  • Before applying a varnish with a brush or roller, a tree should be treated with an antiseptic. At the same time you need to ensure that the wood is well soaked.
  • After the antiseptic means is completely dry, you can start the floor covering with varnish. How many layers of coating are applied, solve themselves, but always at least 2.
  • Since the acrylic means will dry from 2 to 4 hours, then between the stages of varnish is worth it to withstand pause. As soon as the previous layer is dry, you can apply a new one.

The consumption of acrylic varnish for the wooden floor is mainly 100-120 ml / m2. Therefore, it is important to carefully calculate the amount of the necessary tool and buy it at a bargain price. At the same time, we note that the price of acrylic varnish is at the points of sales from $ 50 per canister 5 liters.

It is worth remembering that on average, the flow rate of varnish at first applies is about 1 liter by 8-10 m2. When re-applying, its consumption is significantly reduced and is already about 1 liter by 12-15 m2.

IMPORTANT: Reviews of work on the removal of varnish from many users are also indicated in the strand of chemical plates.