Samples of knitting berette on the knitting needles. Warm beret with the knitting needles. How to knit from gum

Hello girls! I appeared Lydia Psh Color Pervosh. The color in my opinion is neither there either here .. well, nothing to mind went. Yes, and the color does not go. And I do not like to knit from not beautiful threads. I thought, wondered, and tied the daughters two sind and two beret - one warm, the second is thin. Very well, they fit to jackets, for the weather, and they liked the daughters, and I subsequently stopped paying attention to the color, initially I did not like that.

Snuda, I knit narrow, but in two turns, they like me more and do not look narrow. So Born the "Dancing Leaves" kit and the Mair kit.

By the way, if I knit not from the crochet, I am gaining a chain with the main threads with a hook and measure her head circumference, then I calculate the pattern on this number of loops and raise the loop from the pigtails. Honestly, I feel so convenient. I don't even look at the description, where they write "Type 225 loops," I personally says nothing about anything, because I never knit from the yarn specified in the description))) work Irene IVAS.

Description and Knitting Scheme by knitting needles for women

Takes and scarf knitting needles for women

Works Elena Vladimirovna. The set is very warm, the wool is soft and not barbed at all, connected by the knitting number 2 into one thread.

Takes for women "double" with a lining.

Description of beret for women knitting

Drink 120 loops (10 rapports) and knit according to the scheme with rotary rows on circular spokes.

Pan. - Izn. Pretley. Upon completion of the pattern, 60 loops will remain according to the scheme.

2 Option: on the remaining 60 loops in the r. Knit all the loops of 2 p. Together of persons. The next row knit facial. Then knit 2 p. Together of individuals. \u003d 15 p. Cut the thread, stretch it through the remaining loops and secure. To dial 110 loops by distributing them evenly on the base of the beret and tie the sublica lining (facial rows of persons. Loops; Pouring rows are invalid hinges), first adding, and then reducing the approximate scheme number of loops. Connect the seams of beret and the sublades separately. The edge of the beret is to tie the crochet, it will be "bezel".

Scarf description:

Dial 64 loops and knit according to the scheme. Scheme showing. All rows in the pattern from the front side. On each side at the beginning and end of the work, to penetrate 4 loops facial stroy. Tie half, repeating the scheme 3-4 times. Postpone work by starting to knit the second part in the same way. Both finished parts to connect in the middle. Description of the scarf read more.

Scarf knitting scheme:

Knitted knitting knitting for women

Hello girls! Headwear for me is always a problem. What cap will not be spain, it seems that it does not go. I imposed them already ten pieces, but I do not wear wear. What is not Oden, everything seems not mine. Before the heap tied a couple more and again something not that. Maybe not yet used to ... takes connected from Yarn "Exhalex" (50% wool, 50% acrylic). One suburbs left (220m per 100g), the knitting needles number 2.5. Spokes №2,5. The work of Marina Efimenko.

Description of beret with knitting needles for women

Size: S / M - M / L.

Beet length is about 24 cm.
You will need: 100 - 150 g Drops Nepal yarn from Garnstudio (75 m / 50 g, 65% wool, 35% Alpaca), color 0100 ECO; bidirectional and circular knitting needles (40 cm) 5 mm; Circular spokes (40 cm) 3.5 mm - for gum.

Beret knitting density: 17 P x 22 P facial sting \u003d 10 x 10 cm, the pattern "braids" 26 p \u003d 10 cm

Knit in a circle bottom up. Dial 84 - 96 nepal thread on circular knitting needles 3.5 mm. Knit 10 circles with rubber band, 3 out of / 3 people, start with 3 ez. Track. Circle: * 3 NAO, 1 Persons, 1 Nakid, 1 Persons, 1 Nakid, 2 Persons, 1 Non, 2 Persons, 1 Nakid, 1 Persons, 1 Nakid, 1 Persons *, Rep. from * - * to the end \u003d 112 - 128 p.
Go to the spokes of 5 mm.
Continue track. Image: * 3 is elevated, the scheme M.2 (the previous circle scale knit the face for the rear wall) *, rep. From * - * to the end (\u003d 7-8 rapports).
Go to bidirectional needles when the number of loops does not allow knitting on circular. After the scheme M.2 on the spokes 42 - 48 p.
Trail circle: to penetrate all 3 is broken together with one wrong \u003d 28 - 32 p. Trail circle: 2 together persons to the end \u003d 14-16 p.
Cut the thread and stretch it through the remaining loops twice, tightly tighten and secure.

Takes for women connected by knitting

Good afternoon, all lovers of knitting! My name is Elena, I live in the city of Irkutsk, I work in a major energy company, in my free time I fond of knitting, it's not just a hobby is a flight of the soul. I love to knit on the spokes, crochet only

The tender color is decorated and the scarf is decorated with braids, and the fringe on the scarf is made of strips connected by facechair. To knit beret and scarf you will need: 350 g for scarf and 100 g for beret of gray yarn Cora

Takes the knitting with the "Heart" with the motives, for women

Beret size: 56 cm for knitting circumference. You will need: 100 g yarn (55% Merinos wool, 10% cashmere, 35% microfiber, 130 m / 50 g) type "Kashmir Baby" Louisa Harding; Spokes number 3.25 and 3.75. Knitting density

Blue takes for women from "grass"

To knit beret, you will need: 100 g of wool and 100 g of yarn type "Hestern"; Spokes number 4,5 and №6. Description of Beret Type wool yarn 60 loops on the knitting needles №4.5 and knit 4 cm with a rubber band 1 × 1. Connect 2 types

Beret size: 56-58. Takes performed by knitting and crochet. You will need: 100 g of dirt (40 m x 50 g, 88% wool, 12% polyamide) olive color; Spokes number 12; Hook number 9. Attention! Calculation of knitting is given at a sample density:

Two-layer takes and scarf with pockets are knitted by an English elastic band from thick melange yarn. Spectacular set for winter! You will need: 150 g for scarf and 100 g for Beret Mondial Colorado melange yarn (58% Merino wool, 42%

How to tie the needles for women, ideas from the Internet

Interesting and unusual berets can be associated for women with their own hands. Look at how many beautiful models we found for you!

Brightly red treads for women

Size: single.
Head Circle: OK. 56/58 cm.
Materials: Drops Lace yarn from Garnstudio 50 g color 3620, red; Yarn Drops Kid-Silk from Garnstudio 25 g color 14, red; Breaking and circular spokes (40 cm) No. 3 mm.
Knitting density - 24 p. X 32 r. Facial sting in 2 yarn \u003d 10 cm x 10 cm.

Drinking knitting (when knitting by turning rows): 1 handling row (p.) \u003d 2 p. Facial loops.

Tilting knitting (with knitting circles): 1 handkerchief p. \u003d 2 circular p.: 1 r. Persons. and 1 r. izn. loops.

Pattern scheme for beret: see schemes A.1 and A.13-A.15.

How to tie the needles for women

Knim the split, ranging from the center of the square, on stocking and short circular spokes, top down.
Type 12 p. On the Breaking Spins No. 3 mm in 1 thread of Lace yarn and 1 thread Kid-Silk (\u003d 2 yarn). * 1 Persons., 1 Nakid, 1 Persons., 1 izn. *, Check from * - * only 4 times (in the next row, knit crossed loops) \u003d 16 p. Knify lyricbed according to scheme A.1 (4 horizontal rapport). When you check the full vertical rapport of the pattern A.1, you will have 128 p.
Next row: * Pattern A.13 (\u003d 3 p.), Pattern A.14 (\u003d 14 p.) And A.15 (\u003d 15 p.) *, Check from * - * only 4 times. When you check on the full vertical rapport of patterns, you will have 168 p.
Next row: All loops knit according to scheme A.14 (\u003d 12 rapports of 14 p.). Check out 1 rapport in height, then adjust 1 row facial, evenly reduced 46 p. \u003d 122 p. Check out 3 boilers and loop freely. Height caps - approx. 24 cm.

Berecher scheme

Knitting beret with the knitting pattern "broken gum"

Béret Gaufre by Véronik Avery, Irishecka translation

Takes designed for the scope \u003d 52 cm.

On the spokes number 2.5, we collect 132 p., Knit a rubber band 1 * 1, then go to the knitting needles No. 4, evenly make the loop increases to 177.

Pattern report \u003d 25 p. - This means that we will have 7 reports.

We begin ... 1 row (r.) - 1 edge, 2 is elevated. p., * 22 persons. p. 3 izn. P * (report between asterisks, repeat 7 times) We finish p. 1 out. p., 1 edge p. Thus, knit 8 p.

9 R. - 1 chrome. n., 2 is elevated. p., * Remove the extra. Spice 5P. Behind the work, they are providing 6 persons. p., 5 persons. p. with add. Spokes, remove to add. Spice 6 p. before work, 5 persons. p., 6 persons. p. with add. Spokes, 3 is elevated. P. * (Pattern report between asterisks) End p. 1 out. p., 1 chrome. n. All is R. Knit in the drawing.

The following 20 p. Knit like 1 r. 31 r. - How 9 r. 33 p. - 1 chrome. p. 2 Vm. Ozn., * 22 persons. p. 2 Vm. Oz., 1 is elegant. P. * (Pattern report between asterisks) End p. 1 out. p., 1 chrome. p. 35 p. - 1 chrome. p. 1 izn. p., * 1 p. Remove as persons., 1 persons. p. And stretch through the removed loop, 18 persons. p. 2 Vm. Persons., 2 izn. p. * ... End p. 1 out. p., 1 chrome. p. 37 p. - 1 chrome. p. 1 izn. p., * 1 p. Remove as persons., 1 persons. p. and stretch through the removed loop, 16 persons. p. 2 Vm. persons., 2 VM. Oz. * ... Ending r. 2 VM. izn. 39 p. - 1 chrome. p. 1 izn. p., * 1 p. Remove as persons., 1 persons. p. And stretch through the removed loop, 14 persons. p. 2 Vm. Persons., 1 izn. p. * ... End p. 1 chrome. P.

Continue knitting until it remains on the spoke of 16 p. All loops pull, takes to sew.

It takes connected with a simple sweatshirt, in the description it is written to subscribe loops, but I will try partial knitting ...

All rows fit only by facial loops (boil knitting).

Takes for women, description

* We recruit 66 loops. In each second row we reduce two loops 17 times from the left edge of the canvas. The right edge of the canvas is not reduced. After 22 rows, we begin to subscribe and right: in each second row 6 times 3 loops. After 22 + 14 \u003d 36 rows on the spokes should remain 14 loops. *
We again finish from the edge loops of the canvas left 34 loops, and on the right 18 loops. On the spokes there must be 66 loops. We repeat knitting from * to * 9 times (knitting 9 such wedges - it all depends on the circle of the head).

Knitted takes today at the peak of popularity. Options for implementing a lot: from openwork to volumetric, from classic, concise to flirty. Knitting beret is a rather exciting occupation that does not require much experience. In this article, we will tell you how to tie the scheme with the needles and descriptions represent different models.

"Gerda", patterns and descriptions of different sizes of caps

Dimensions: S / M (M / L). Height of the finished hat 24cm.

We need:

• yarn (65% wool, 35% Alpaca) 50g by 75m;
• set of stocking joint ventures. NO5;
• circular joint ventures. NO5, length 40cm;
• circular joint ventures. NO3.5.

Patterns:

Mute Density: 17P. on 26r. On the relief figure correspond to the square 10 cm per 10 cm.

Description - how to knit takes

Scheme of the knitting model "Gerda" - bottom up.

We recruit 84 (96) p. on the joint No3.5 and knit with your own hands in line 10p. gum. And begin it from the 3rd is. P.

Track. R.: * 3i., 1l., 1n., 1l., 1n., 2l., 1st., 2l., 1n., 1l, 1n., 1l. * - Repeat from * and up to * until the end of the row. We have 112 (128) p. Go to the joint venture. NO5.

Track. R.: * 3I., Relief - see the scheme (Nakida Prev r. Slit people. P. For the bottom slices) * - repeat from * and to * on all p. Row (this is 7 (8) rapports). When the number of looping in the work is reduced, go to stocking joint ventures. Supposing the rapport in height - 42 (48) p., In the next. R. We do the accurate. The scheme is this: every 3 months. P. The rubber bands are configured in 1ness. We have 28 (32) p. In the next. R. Every 2-liter. p. Slip in 1 liter. n. We have 14 (16) p. We break the thread, hook it through the remaining loops, we are tightened, we take on the wrong side and fix it.

Fashionable hat-hat with big oblique: video MK

Takes knitting from yarn "Book", description

Women's hats from the "Book" spectacular and warm at the same time. Such types of caps are suitable for winter weather and early spring. Knit just - with knitting or crochet. This model is 56 size.

We need:

• yarn "book" - 90g;
• set of stocking joint ventures. NO5;
• markers (M).

Patterns: front surface - with circles of knitting all loops facial.

Description and Schemes - how to tie

Initially, you need to tie the sample from the selected yarn for the caps of the faces. smooth. Determine the mating density. By pattern, calculate the required amount of loops.

We recruit the required number of loops. It must be divided into 6, but if it did not work out, it's so rounded in the nearest side to a multiple six number, better - to the big one. Go to a circular knitting, distributing the loops on 4sp. Check one series of facial by installing M on the border of the selection on six wedges.

We continue to knit caps for women with their own hands, making the addition in each 4th r.: In each of the wedges 1p. Having received 6 cm heights, the addition stops. Next, takes the needles to knit exactly 2 cm. Now we will make a row, mirror gains: in every 4th r. In the height section up to 8cm. Then we do the same accommodation in every 2nd r. By sticking to the desired height, we tear the thread, we produce through the remaining loops, we are tightened, the crochet is displayed on the wrong and fastened.

When working, it is advisable to drain women's hats with a pattern, if necessary, adjust the accurate / add.

At the bottom of the header for women with crochet, we encourage the rim by the columns without a nakid. Its height is about 5 cm.

Beretik with braids "Starr": video master class for beginners

Volumenny takes the needles, description

Model of caps for women with scalp 54 / 56cm.

For mating caps, we need:

• yarn, 55% wool (50g on 70m) - 150g;
• sets of stocking joint ventures. NO5 and NO6;
• auxiliary joint venture;
• markers.

Patterns:

• turning ch.: When viscating, rolling alternating 1p. Facial with 1p. Torn. P.;
• persons. smooth: when viscating in line - only the personal.
• main pattern:
  From the 1st to the 4th R.: Fests. ch.;
  5p.: * 8l., 1 Open bid of 6 p. (On 6 p. With the help of auxiliary needles, we encounter 8 rubles. Persons, return n. On the right joint venture.) * - Repeat from * and to * on all p.;
  From the 6th to the 9th R.: Persons. ch.;
  10p.: * 1l., 1 Open shishchka, 7 faces. (Shishchki shift) * - Repeat from * and to * on all p.
  We repeat from the 1st to the 10th r.

Mattle density: NO6 spokes on the main figure 14.5P per 21p. correspond to the square 10cm per 10 cm.

Knit the volume takes

We begin the mating caps from the SP set. NO5 78P. Tied your hands 4cm shoe. Figure, go to the joint venture. NO6. We proceed to the main drawing, in the first p. We make a uniform increase 34p. We get 112p. After completing 30r. - See Patterns with bumps, go to persons. GL

Now we will do the accumulation. Scheme Such: I celebrate the marker every 14th n. And in the next. R. In each marked and previous paragraph 1p. Next, perform the accumulation in each row. When there are 8 p. We break the thread, we draw through the loops, we are tightened, the crochet is removed on the wrong, fix.

We bind the bottom of the caps and the 1st p. Basic drawing with crochet column without Nakid.

Volumetric Take: Video Master Class

Summer openwork takes knitting for women with their own hands, description

This kind of caps for a woman with a scalp 53.5 cm.

For this openwork beret, we need:

• yarn (100g per 274m) - 100g;
• circular joint ventures. 40cm NO3.75 and NO4;
• hook no4.

Patterns and description of the technique:

elastic band 2lits.x2 meaning.;

2pl - 2p. Together to the left: to lie two p. in one faces. in the usual way;

2PP - 2P. Together to the right: change the second and first joint ventures in places. on the left joint venture And to sign them in 1lits.

Knit summer openwork beret

We recruit the joint venture. NO3.75 96P. And go to a circular knitting. Tinning 5p. Persons., Go to the gum.

Tied your hands 12p., Change patterns:

• track. Row: * 2l., from 1p. -2Tell. * -Pover from * and up * for the whole range. We have 144p.;
• track. R.: Persons.

Repeat from the 1st to the 10th r. Schemes 5 times. Further, we make the relevant:

1p: * 4I., 2PP, 4L., 2PL, 4I. * - Repeat from * and to *;

2p: * 3i., 2pp, 4l., 2pl, 3rd. * - Repeat from * and to *;

3r.: * 3i., 6l., 3i. * - Repeat from * and up to *;

4p.: * 2i., 2pp, 4l., 2pl, 2nd. * - Repeat from * and up to *;

5p.: * 2i., 2pp, 2l., 2pl, 2nd. * - Repeat from * and up to *;

6p.: * 1I., 2PP, 2l., 2pl, 1st. * - Repeat from * and to *;

7R: * 1I., 4l., 1I. * - Duplicate from * and to *;

8R: * 2PP, 2l., 2pl * - duplicate from * and to *

9p.: * 1l., 2pp, 1l. * - duplicate from * and to *;

10p.: * 2PP, 1l. * - Duplicate from * and to *;

11R: * 2 PP * - duplicate from * and to *. We have 9p.

Cut the thread, to turn through the remaining loops, tighten, bring the hook to the wrong one, consolidate.

Openwork beretc for women associated with their own hands is ready!

Single scheme

2 years ago

In winter, in the fall, in the spring and even in the summer very relevant to carry berets. In today's article we will discuss knitting knitting knitting needles. In the headdress created with your own hands, you will look always delightfully and stylish. And the variety of options will pleasantly surprise you. There is nothing difficult to knitting anything, therefore, even a starting master will cope with the task.

Headdress is a mandatory object of each wardrobe. There are many interesting models of knitted beret. Knitting the knitting knitting needles can be chosen any, it all depends on the level of your practical skills.

On a note! Throughout the view will be berets associated with the same scheme, but from various yarn. Hats, made of booklined mohair, Angora, melange yarn look very original.

Beautiful and fashionable addition to the children's image will be taken for the girl. Knitting his knitting needles is not too different from adult models. As a basis, you can take one pattern and count on the volume of the head the desired number of loops.

Top up your creative piggy bank with new models of knitted bars:

• exquisite simplicity;

In fact, knitting with knitting needles for women is an easy thing. Everyone, of course, depends on the level of your skill. As a rule, Berets are trying to knit on circular spokes to make a piece of seamless. But novice needlewomen can be written with two knitting needles, and then on the back of the native to connect the two parts of the product with knitted seam.

Now you will be sure that you can easily stick with the knitting needles. Knitting schemes Take note.

Tip! Suitable for treads of yarn, consisting of wool and acrylic in equal proportions. You can take a semide with a polyester.

Necessary materials:

• yarn;

Step-by-step process description:

Takes "Gerda"

Knitting the knitting needles for beginners is complexity mainly in circular knitting. Try first just to lie a small sample.

Tip! In order not to get confused, at the beginning of a number, be sure to put the color marker and constantly move it, tightening the row in a circle to the end.

Necessary materials:

• yarn;
• spokes of the appropriate size.

Step-by-step process description:

We meet the winter stylish

You can tie for yourself or your daughter the original takes the pattern of "shishchechki". Even novice craftsmen can cope with such a pattern. For convenience, use auxiliary needle.

Necessary materials:

• yarn;
• the needles of the corresponding size;
• auxiliary needle - 1 piece.

Step-by-step process description:

1. To knit such a beret, it is better to choose a yarn, consisting half of the wool.
2. We recruit the desired amount of loops according to the scalp.
3. We begin with knitting gum 1x1 and 2x2.
4. Then several rows are tied with a handkerchief. One row is solely with the facial hinges, the second - involved.
5. Now proceed to the confusion of the pattern. With 1 to 4 ripping figures, drawing all the rows of facial stroke.
6. In the fifth row, we begin to encourage the cushion pattern. Rapport looks like: the first 8 kettops in the face loop. Next, there is a shishk, consisting of 6 loops.
7. The bump knit like this: we move the next 6 loops on the auxiliary needle. We are in the height of 8 rows of facial stroke.
8. Bucked segments move to the right spoke.
9. We repeat this rapport, start with 8 facial loops until the end of the knitting row.
10. The following rows, from the sixth, ninth, we only have a facial stroy.
11. In 10 row again begin to encourage the drawing.
12. First, they see 1 facial loop. Next, knit a bump according to the rapport described above. Then they see another 7 facial carelets.
13. Repeating this rapport, we have a row to the end. The height of the Rapport is 10 rows.
14. We repeat it until the cloth is obtained.
15. Then we evenly make the outfit, trying on the head.
16. The remaining loops move to the working thread and tighten well.

Takes is a universal headdress. It suits women with different types of face and age. A large variety of schemes allows you to pick up and knit with the knitting yourself. If it is correct to calculate and take a suitable yarn, a knitter with minimal skills can cope with this simple task.

Where to begin

Currently there are many products made using various techniques and patterns. In order to correctly choose the models of the testers bound by the knitting needles, you need to objectively evaluate your skills. After the needlewoman decided on a suitable scheme, you need to choose the right type of yarn. It is recommended to use the same threads as in the original description. If there is no such possibility, then you need to pick up the yarn, as close as possible in composition and thickness. It should be considered the time of year for which it is expected to knit with the needles. For winter products, a thicker yarn is selected with a wool content. For summer berretics, threads with silk, cotton or viscose are well suited.

In the event that another thickness threads are taken, you need to connect a small sample of 10 by 10 cm, which will help determine the density of knitting and calculate the amount of loops required for the initial set. Headgear usually knit from the edge, but there are also models related to the knitting needles, in which the middle is reset, and then the main pattern is performed.

In order for the first experience to end well, it is necessary to correctly pick up the numbers of the spokes. If they are too thin, then knitting will strongly delay. Conversely, too thick knitting needles make a product with a hole and ugly. It is best to follow the instructions that are given in the description.

With the help of a well-selected model, you can create a unique image, so it is very important to choose an interesting pattern for beret with the knitting needles. If it is decided to stay on one of the openwork options, you need to think about a warmer lining. When knitting double beret, it is better to take threads to the thread, then they will look more harmonious. The most successful patterns are:

1. Zigzag - this kind of mating will look more successful if you pick up different colors that are combined with each other. One of the zigzag options - the wave helps to create a more feminine image.
2. The leaves are a popular scheme for knitting with knitting needles. It should be borne in mind that the pattern is obtained very openwork due to intermediate nakidov. For such a product, you need a cross-linked or knitted lining.
3. Veter - represents expanding waves. This kind of knitting is perfect for melange yarn.
4. The hedgehog is one of the most simple patterns that will be under the power of a novice master. It is enough to master the facial and invalid loops.
5. Spit is one of the most winning patterns that adorn hats. Knit berets with spokes with braids can be both along and across. Products associated with such a scheme are obtained by warm and voluminous.

If the master takes on this case for the first time, you should not stop at a too complex model. To begin with, it is recommended to tie a simple knitting needles, which will consist of simple facial loops and additives. Materials: Circular Spokes No. 2, Alize Lanagold Yarn.

To dial 85 loops, closure in a circle, to penetrate a gum with removed front loops 6 cm. Make the absorption every 4 loops, having encouraging one behind the front wall, and the other for the back. Continue to knit without add-ons 15 cm. After that, split all the loops on 6 parts, mark them with special markers for knitting. Make a lifting in every second row until 18 loops remain on the knitting needles. Then you need to go through all the loops, a durable thread and thying them well.

For this thing you need to take the following materials: Threads ALIZE CASHMIRA (pure wool), circular needles having a diameter of 2 mm and 4 mm.

To begin with, dial 124 loops on the knitting needles. After the first row is tied, you need to connect the loops into the ring and to stick the gum 2 to 2 15 rows. On this take, it will be necessary to make a lapse, as it is intended for cold winter weather. Therefore, the next row begins to knit in a checker, performing facial hinges above the involving. Peel 15 rows and perform a gum with a tit, then you need to take the knitting needles 4. In the next row, 34 loops are added evenly.

The resulting amount of looping is divided into 6 wedges. Next knit on the spit pattern. It is performed by facial, which are crossed together. Rapps are separated by paths of 3 insane. In order to take it in bulk, you need several rows to perform the add-ons. After testing, 17 cm (excluding rubber band) additions are made in each rapport through a row. So you need to continue until there will be no 12 loops on the knitting needles. Work thread cut, leaving 10 cm, it is finished through the remaining loops and tighten.

Berets associated with spokes with diagrams intended for warm weather, it is better to perform in openwork patterns. It is a bit more complicated to knit them, because the scheme consists of a combination of nakidov, facial and invalous loops. But the flow rate of such a product is much less than in the volumetric one. It is obtained light and air. Materials - Spokes No. 3, Yarn "Narcissus".

The product knits in a circle. On the circular spokes you need to dial 100 loops. The first 2 cm knit stigma, then one row is written according to the following scheme - two loops facial together, one nakid. So you need to alternate until the end of the row, then make a lapse and perform 2 more. To add 20 loops evenly. Everything that happened after the increase should be divided into 10 loops of 12 loops. Next takes the following scheme. After 14 cm be performed, the accumulation begins. The 60 loops remaining on the spokes are twisted together through one row. Now there should be only 15 loops on the needles. Gently pull them out together, hide the thread ends.

Takes from volumetric threads

Volumetny takes the knitting needles very quickly. To perform it, you need to take the knitting needles 6 and 7, yarn Alpine Alpaca Yarnart.

On the spokes number 6 score 78 loops. Now you should link 8 cm to the handlers and make the odd. Next you need to go to the needles number 7. It must be done to make the extension. The main drawing is beginning to encourage after a uniform addition of 34 loops. Together it turns out 112 loops. The main drawing knives strictly according to the scheme. To form the bottom of the beret, you will need to go to the front surface and make a slope. Each fourteenthest loop is pronounced together. Perform another series of facial, the outbreak continues until 8 loops remain on the knitting needles. With the help of the hook, you should connect them, and the tip hide.

Following these simple instructions, any, even a beginner knitter will be able to create an interesting accessory and make your image more bright and unique.